• 제목/요약/키워드: non-composite

검색결과 1,570건 처리시간 0.033초

Perfluoropolymer Membranes of Tetrafluoroethylene and 2,2,4Trifluofo- 5Trifluorometoxy- 1,3Dioxole.

  • Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
    • /
    • pp.39-42
    • /
    • 1999
  • Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

  • PDF

부가적인 산부식이 자가산부식 접착제의 법랑질에 대한 전단결합강도에 미치는 영향 (Influence of additional etching on shear bond strength of self-etching adhesive system to enamel)

  • 유선진;김영경;박정원;진명욱;김성교
    • Restorative Dentistry and Endodontics
    • /
    • 제31권4호
    • /
    • pp.263-268
    • /
    • 2006
  • 최근 많이 소개되고 있는 자가산부식 접착제는 상아질에 대한 접착은 우수한 것으로 알려져 있지만 법랑질에 대한 접착은 인산에 비해 낮은 산도로 인해 충분한 부식이 일어나는지에 대한 논란이 되고 있다. 본 연구에서는 서로 다른 산도를 가진 1 단계 혹은 2 단계의 자가산부식 접착제에서 부가적인 산부식이 법랑질과 복합 레진 사이의 전단결합강도에 미치는 영향을 평가하고자 하였다. 90 개의 발거된 우치의 순면을 물기가 있는 상태에서 #600 사포로 표면을 연마하여 평활한 법랑질을 노출시킨 후, 임의로 6군으로 분류했다. 사용재료는 Clearfil SE $Bond^{\circledR},\;Adper^{TM}$ Prompt L-Pop, 그리고 Tyrian $SPE^{TM}$를 사용하였으며, 각 재료에 추가적인 산부식을 시행한 군과 그렇지 않은 군으로 나누어 표면 처리한 후, 제조사의 지시대로 접착과정을 시행하였다 . 각 시편에 복합레진을 2 mm 두께로 충전하고, 40 초간 광중합을 하였다. 그 후 시편을 $37^{\circ}C$, 100% 상대습도에서 24시간 보관 후 전단응력 접착강도를 측정하였다. 결과치는 independent t - test를 이용하여 통계분석 하였으며 그 결과는 다음과 같이 나타났다. Clearfil SE $Bond^{\circledR}$에서 부가적인 산부식을 시행한 군이 그렇지 않은 군보다 유의하게 높은 접착강도를 나타내었다 (p < 0.01). $Adper^{TM}$ Prompt L-Pop과 Tyrian $SPE^{TM}$에서는 부가적인 산부식이 결합강도에 통계적인 유의차를 나타내지 않았다 (p > 0.01). 본 연구의 결과로 보아, 강산을 함유하고 있는 접착제를 사용할 경우에는 부가적인 부식 처치가 접착력을 증가시키지 않으나, 약산을 함유하고 있는 접착제의 경우에는 부가적인 산부식이 접착력을 증진시키는 것으로 사료된다.

Bacillus amyloliquefaciens SRCM 100731의 반려 동물용 프로바이오틱스 소재로서의 특성 규명 및 배양 조건 최적화 (Characteristic study and optimization of culture conditions for Bacillus amyloliquefaciens SRCM 100731 as probiotic resource for companion animal)

  • 류명선;양희종;정수지;서지원;하광수;정성엽;정도연
    • 미생물학회지
    • /
    • 제54권4호
    • /
    • pp.384-397
    • /
    • 2018
  • 본 연구는 전통 발효식품에서 반려동물의 사료 및 보조식품 등에 사용될 수 있도록 안전성 확보와 프로바이오틱스 활성 등 기능성을 갖춘Bacillus 속 균주를 선발하고자 하였다. 전국에서 수집한 전통 장류에서 약 300종의 분리주를 확보하였고, Bacillus cereus가 생성하는 구토와 설사 독소 유전자 6종, ${\beta}$형 용혈성, 발암 관련 효소 3종 등을 보유하지 않거나 생성하지 않는 4종의 균주를 선별하였다. 4종의 분리주를 대상으로 항생물질 유전자 보유 여부, 세포 표면 소수성, 항생제 감수성과 당 이용성 등을 분석하였고, 최종적으로 항생물질 생성 유전자 3종을 모두 보유하고, 혈전 용해 및 세포 표면 소수성이 가장 우수한 SRCM 100731을 선정하였다. 최종 선별된 SRCM 100731의 16S rRNA 염기서열 분석 결과 Bacillus amyloliquefaciens로 동정 되었으며, 펫 사료 및 식품 등 산업적 적용을 위하여 균체 성장 최적화를 수행하였다. SRCM 100731의 배지 성분 선별을 위하여 Plackett-Burman design (PBD)을 사용하였으며, 최적 성장을 위한 배지 성분으로는 molasses와 sodium chloride, potassium chloride가 예측되었다. PBD를 통해 선정된 배지 성분의 농도를 최적화하기 위하여 central composite design (CCD)을 사용하였으며, 실험 결과 7.0% molasses, 1.1% sodium chloride, 0.5% potassium chloride로 예측되었다. 이때 최대 균체량은 12.6625 g/L로 예측되었으며, 최종적으로 실험 모델의 예측값과 실 측정값이 $12.6625{\pm}0.0658g/L$로 오차 범위내의 결과를 나타내어 실험 모델의 신뢰성을 검증할 수 있었다. 이는 실험 모델에 의해 예측된 최적 배지 사용 시 최적화 이전 배지에서의 균체량($1.8273{\pm}0.0214g/L$) 대비 약7배로 균체량이 증가함을 확인할 수 있었다. 향후 B. amyloliquefaciens SRCM 100731의 제품 개발 등 후속 연구의 진행이 필요하나 본 연구를 통해 산업 적용이 가능한 프로바이오틱스 소재의 발굴 및 산업화 배양 조건이 확립 되었으므로 앞으로 성장하고 있는 반려동물 산업에 유용하게 활용 될 수 있을 것으로 기대된다.

RHS기둥-보 접합부의 모멘트전달효율 평가 (Evaluation of Moment Transfer Efficiency of a Beam Web at RHS Column-to-Beam Connections)

  • 김영주;오상훈
    • 한국지진공학회논문집
    • /
    • 제10권4호
    • /
    • pp.67-76
    • /
    • 2006
  • 본 논문에서는 철골 각형강관단면(RHS) 기둥-보 접합부에서 웨브의 모멘트 전달효율을 평가하였다. 먼저, 5개의 철골보접합부에 대한 비선형 유한요소해석을 수행하였다. 이들은 접합부 상세가 다르게 설계되었고, 따라서 휨저항 성능이 각기 다르다. 해석결과 RHS 기둥을 가진 모델은 기둥 플랜지의 면외변형 때문에 WF(Wide Flange) 기둥을 가진 모델에 비해 모멘트 전달효율이 저하함을 보였다. 스캘럽(WAH)과 얇은 강관기둥 두께도 모멘트 전달효율의 저하를 가져오는 원인으로서, 결과적으로 보-기둥 접합부의 파단을 초래할 가능성이 크다. 해석과 이전의 실험결과를 기초로 하면, 응력집중은 모멘트 전달효율과 반비례하고, 접합부의 변형능력은 모멘트 전달효율의 저하에 따라 감소하는 것을 알 수 있다. 더 나아가서 바닥슬래브가 있는 합성보 접합부에 대한 유한요소해석결과는 중립축이 상부플랜지 방향으로 상승함으로써 모멘트 전달효율이 저하했고, 이러한 영향은 접합부의 조기 취성파단을 초래하는 것을 보였다.

체형(體型) 균형화(均衡化)를 위한 파운데이션 가먼트 제작(製作)에 관한 연구(硏究) - 장년층(長年層) 여성(女性)을 중심으로 - (A Study of the Foundation Garment Manufacturing for the Well-Balanced Somatotype - With middle-aged womenhood -)

  • 최미성;김옥진
    • 한국의류학회지
    • /
    • 제17권2호
    • /
    • pp.247-264
    • /
    • 1993
  • This study deals with the manufacturing of the foundation garments for the well-balanced somatotype of the Korean middle-aged womenhood. In order to get hold of the different somatotypes, a survey of a total of 134 middle-aged women in Kwangju area, ranging in their age from 45 through 59 was made. The statistical methods used for the analysis of the basic data were the Pearson's correlation coefficient, Anova, Cluster analysis and Stepwise. Emphasis of the try-on test was placed on (1) the comparison of anthropometric data before and after trying on the foundation garments, (2) sensory evaluation, (3) a rating on fit and performance, (4) the comparison by means of photograph. The conclusions obtained are as follows : 1) The 134 women sampled and measured were classified into the five groups of somatotype : the 52 women (34%) belong to Cluster 1 ; the 22 women(14.5%) belong in Cluster 2 ; the 12 women(7.9%) belong in Cluster 3 ; the 15 women(9.9%) belong in Cluster 4 ; the 33 women(27.7%) belong to Cluster 5. 2) As for the characteristics of the foundation garment design, the V-shaped neckline and chest dart was used. The adjust point is right above the perineum point. The foundation garment length is as far as trochanteric point. The materials used are cotton/polyurethane, lace, 100%cotton. The materials used for corrections were the sponge pad for the chest, and non-woven fabric pad for the back, shoulder and the hip. 3) The comparison of the anthropometric data of the subject when dressed in foundation garments showed a significant difference in bust point height, in bust point length and in nipple-ta-nipple breadth, which proves the foundation garments to be effective in correcting such part as the chest, the hip and the abdomen. 4) As considered in terms of the sensory evaluation, the item except for the shoulder and the armhole coincided with each other in the mean value and in the composite reliability coefficient, which also proves the foundation garments to be effective. 5) Subjects were satisfactory on fit, performance, design, of the foundation garment, and their changed appearance. 6) In the case of the comparison through the photographs, the silhouettes of all the five women subjects were found effectively to be balanced.

  • PDF

폐석분을 사용한 시멘트 2차 제품의 물리적 특성에 관한 연구 (A Study on the Variation of Physical Properties on the Secondary Product of Cement by Using Crushed Stone Powder)

  • 박지선;이세현;송훈
    • 한국건설순환자원학회논문집
    • /
    • 제6권4호
    • /
    • pp.103-111
    • /
    • 2012
  • 압축강도 50 MPa이상의 압출성형 시멘트 패널은 고온고압 증기양생으로 생산된다. 고온고압 증기양생에서 요구 강도를 얻기 위해서는 시멘트에 포함되어 있는 CaO와의 반응에 필요한 적정량의 $SiO_2$를 공급하는 것이 관건이다. $SiO_2$의 공급원으로 가장 널리 사용되는 원료는 규석분인데, 이는 환경파괴를 전제로 하기 때문에 친환경적인 제품 생산을 위하여 본 연구에서는 규석분을 대신하여 폐석분을 활용한 시멘트 2차 제품을 생산하고 이에 대한 압출성과 물리적인 특성비교를 실시하였다. 이를 위하여 화성 석산에서 채취한 폐석분을 건조 파쇄한 후 이를 규석분 사용량의 최대 50%까지 치환하여 압출성 및 물리적 특성 실험을 수행하였다. 실험결과 평균 입경은 폐석분과 규석분의 크기가 유사하였으나 물리적 특성은 규석분을 폐석분으로 단순 치환하였을 경우, 대부분 낮게 발현되었다. 따라서 폐석분을 활용할 경우 수화활성을 위한 첨가제 등의 활용이 필요할 것으로 판단된다.

  • PDF

한국채택국제회계기준(K-IFRS)의 도입이 보수주의에 미치는 영향: 유통기업들을 중심으로 (초기 일시적 적응 현상) (The Impact of K-IFRS Adoption on Accounting Conservatism: Focus on Distribution Companies)

  • 노길관;김동일
    • 유통과학연구
    • /
    • 제13권9호
    • /
    • pp.95-101
    • /
    • 2015
  • Purpose - This study provides evidence of the impact of the mandatory adoption of Korean equivalents to International Financial Reporting Standards (K-IFRS) on accounting quality. K-IFRS uses fair value as a basis of measurement and is characterized by principle-based standards. These characteristics can lead to a decrease in conservatism. Therefore, this study aims to examine whether or not there is a change in the level of conservatism before and after the enforcement of K-IFRS (2007~2014). By comparing 2007 through 2008 and 2013 through 2014 (excluding 2009 to 2012), we test "the temporary adjustment phenomenon" and document an overall decline in the degree of conservatism after the adoption of K-IFRS. Research design, data, and methodology - Our sample is comprised of data of all listed Korea Composite Stock Price Index (KOSPI) manufacturing distribution companies in Korea from 2007 to 2014, which yields the pooled sample of 4,412 (panel A) and 1,915 (panel B) firm-year observations for hypotheses 1 and 2. In line with recent literature, we adopt the Givoly and Hayn (2000) model, which recomputes the non-operating accruals, excluding two components that are most likely to capture the effect of restructuring activities: special items and gains or losses from discontinued operations. In addition, we also use these variables: SIZE, LEV, INV_CYCLE, ROA, OWN, and FOR. Results - Our sample period spans 2007 to 2014. This offers evidence on the effect of the mandatory adoption of IFRS on conservatism. Our findings can be summarized as follows. First, in panel A, for mandatory K-IFRS adoption (2011), we do not find any significant evidence of conservatism. We can guess that the "temporary adjustment phenomenon" is the reason that we do not find significant evidence of conservatism. Second, we investigate panel B from 2009 to 2012. We document an overall decline in the degree of conservatism after the adoption of K-IFRS. We can assume that these results are due to "the temporary adjustment phenomenon." Conclusions - This study finds that conservatism significantly decreased after IFRS adoption. In particular, this study makes the initial effort to elucidate "the temporary adjustment phenomenon" to analyze the effect of K-IFRS on conservative accounting. We argue that K-IFRS are conceptually conservative but that inappropriate application of the conservatism principles is likely to prevent financial reporting from reaching the level of conservatism targeted by the IASB. Overall, this paper contributes to the literature on IFRS and can be useful to capital market supervisors who are monitoring the trends of the firms implementing K-IFRS. Additionally, our results inform stakeholders of the potentially negative effect of the greater flexibility permitted by IFRS and/or lack of appropriate enforcement on key dimensions of accounting quality. This has important implications for Korean regulators and standard setters as they review the cost and benefits of IFRS. Our study also sheds light on the importance of the institutional environment in achieving the targeted objectives for improving financial reporting quality.

일 도시 여자 고등학생에서 월경전기증후군 및 월경전불쾌장애와 우울, 수면의 질, 수면형태의 연관성 (Association of Premenstrual Syndrome and Premenstrual Dysphoric Disorder with Depression, Sleep Quality and Sleep Pattern in the Korean Female High-School Students)

  • 이지연;김석만;강석훈;정혜경;최진희;소형석;김태용;백기청
    • 대한불안의학회지
    • /
    • 제12권2호
    • /
    • pp.113-118
    • /
    • 2016
  • Objective : Premenstrual syndrome (PMS) and premenstrual dysphoric disorder (PMDD) is known to reduce the quality of sleep and is associated with various psychiatric disorders. The aim of this study was to investigate the relationship of PMS with depression, sleep qulity and sleep pattern in Korean female adolescents. Methods : Out of 867 high school female students, 400 female subjects were included in this study. All participants completed self-report questionnaires that included demographic variables, shortened premenstrual assessment form (SPAF), patient health questionnaire-9 (PHQ-9), Pittsburgh sleep quality index (PSQI), Epworth sleepiness scale (ESS), insomnia severity index (ISI) and Korean translation of composite scale (CS). A total of 394 individuals who completed the questionnaires were analyzed. Results : As score of SPAF, 143 subjects was defined PMDD group. They had more prevalence of eveningness, more depressive symptom, poorer sleep quality, and more excessive sleepiness than non-PMDD groups. Although the PMDD groups showed more menstrual dysmenorrhea, no difference was found in bleeding duration and cycle. PMS symptom had correlations with depression, poorer sleep quality and excessive sleepiness during the daytime. There was no difference in sleep duration between two groups, but PMS might have a relationship with eveningness of chronotype. Conclusions : Among Korean female high school students, the PMS might have an association with depression and poor sleep quality, and it might lead to daytime impairment due to excessive sleepiness. An appropriate evaluation of PMS could be helpful in determining the mental health condition of adolescents.

  • PDF

무동력 트랙터 복합작업기의 디스크 구조해석 (Disk harrow structure analysis of non-motorized composite implement of tractor)

  • 이충호;장지운;이인범;김현경
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.85-85
    • /
    • 2017
  • 무동력 복합작업기는 치즐쟁기와 디스크의 배열에 따라 작업성능이 좌우된다. 프레임과 디스크, 치즐쟁기에 가해지는 기본적인 힘의 상태를 확인하기 위한 정적 구조해석을 수행하였다. 복합작업기는 디스크는 $18^{\circ}$가 경사진 형태로 전면9개 후면9로 총 18개, 치즐쟁기(Chiselplow)는 4개로, 디스크는 모두 18개이다. 정적인 상태에서 끄는 견인력은 100마력, 150마력, 200마력으로 하였으며 Inventor의 해석 시스템은 힘을 N으로 사용하기 때문에 각 마력에 부가되는 하중을 N으로 치환하여 사용하였다. 구속조건은 frame과, disc, chisel plow에 맞닿는 면을 구속하고, 힘의 방향은 프레임과 트랙터의 연결면, 디스크 날과 땅의 접촉면에 적용했다. front /rear 디스크는 이론상으로는 양 디스크가 쌍으로 마주하고 있어서 스캔데이타를 중심으로 모델링한 결과를 바탕으로, 전후면 디스크해로우의 해석을 수행하였다. 조립 또는 사용상의 문제점이나 자연적인 유격에 의해 어느 정도 대칭이 되지 않을수 있으나 그 정도에 따라 진동과 내구성에 문제가 될 수도 있기에 한쌍에 대해 모델링을 통한 해석을 수행하였다. 해석결과에 따르면 디스크에 작용하는 폰미세스 응력은 극한강도에 미치지 않은 것으로 나타났으며 Frame의 최대 폰 미세스 응력을 제외하면, 대부분의 응력은 항복강도에 현저히 미치지 못하는 수치이고, 프레임의 경우는 150마력, 200마력으로 힘을 가할 때 항복강도는 넘는 수치이지만 극한인장강도에는 미치지 못하는 수치인 것을 알 수 있었다. 100마력에 폰 미세스 응력의 최대값은 0.161918 MPa이고 프레임 강의 항복강도인 207MPa와 디스크의 항복강도인 250MPa에 못 미치는 수치이다. 150마력과 200마력의 힘으로 회전할 때의 폰 미세스 응력의 최대값은 0.286425MPa과 0.381921 MPa로 항복강도인 250MPa에 크게 못 미치는 수치이다. 그 이유는 디스크해로우 방식의 복합작업기는 견인저항력이 작게 설계되고 작업속도를 개선하기 위한 목적으로 사용되기 때문으로 사료된다. 벤치마킹 기대의 Rear 디스크도 마찬가지로 각도는 $18^{\circ}$이며, 동일한 구속조건을 적용하여 시뮬레이션을 수행하였으며 해석결과는 모두 항복강도 이내로 예측 되었다. 디스크에 최대로 응력이 미치는 부분은 디스크와 프레임이 연결되는 허브 부분이다. 각도가 커짐에 따라 응력이 증가하므로 이를 감안한 설계인자 도출이 가능하다. 마력과 각도가 증가함에 따라 디스크 해로우에 작용하는 폰미세스 응력과, 접촉압력이 증가하므로 이에 대한 검토와 동적하중인 로드프로파일을 적용한 해석을 수행하여 내구수명 특성에 대한 연구를 수행할 계획이다.

  • PDF

음향방출과 미세역학적시험법을 이용한 단일섬유강화 에폭시 복합재료의 비파지적 섬유파단 위치표정 및 계면물성 평가 (Nondestructive Interfacial Evaluation and fiber fracture Source Location of Single-Fiber/Epoxy Composite using Micromechanical Technique and Acoustic Emission)

  • 박종만;공진우;김대식;윤동진
    • 비파괴검사학회지
    • /
    • 제23권5호
    • /
    • pp.418-428
    • /
    • 2003
  • 섬유파단은 복합재료의 기계적물성을 규명하는 가장 중요한 현상 중 하나이며, 섬유파단 위치는 기지재료의 물성과 섬유표면 처리에 따라 광학현미경에 의한 방법뿐만 아니라 음향방출법을 이용하여 확인 및 상호비교 할 수 있다. 두 개의 음향방출 센서를 단일섬유강화 에폭시 복합재료 시편 표면에 부착 시켜 연속적인 섬유파단 신호를 변형률과 측정 시간에 따라 감지하였으며, 계면전단강도는 단일섬유강화 복합재료 시험에서 광학적 방법과 음향방출법을 이용하여 측정하였다. 탄소섬유의 파단 수는 섬유표면을 전기증착으로 처리한 경우가 많았으며, 광학적인 관찰 시에 좀 더 많게 나타났다. 하지만 음향방출법과 광학적 방법에 의한 섬유파단의 위치는 작은 오차범위 내에서 상호 잘 일치하는 결과를 얻을 수 있었다. 음향방출법에 의한 섬유파단 위치표정과 파형분석은 투명, 반투명 및 불투명한 복합재료의 계면물성을 비파괴적으로 측정하기 위한 유용한 방법으로 사료된다.