• Journal of Sericultural and Entomological Science
• /
• v.19 no.1
• /
• pp.19-23
• /
• 1977

In the previous short communication, the authors reported the applicability of Sodium Hyplochoride solution to silkworm rearing industry as a disinfectant after confirmed the fact that the chemical agent is capable to kill most of the pathogens of silkworm diseases. The authors, in the present study, attempted to investigate the influence of the chemical on the growth of silkworm larvae and the effect on the disinfection of silkworm larvae to inactivate the pathogen of yellow muscardine disease, Isaria farinosa and the results obtained are summarized as fellows. 1. The chemical agent did not affect the growth of silkworm larvae, when it was applied on silk-worm body with the concentration of 1,3,5 per cent of the agent during the rearing period. 2. The Sodium Hypochloride solution did not give any damage to silkworm larvae when larvae were fed up with 1,3,5 per cent of the solution. 3. In the bioassay of the solution on disinfection of larvae inoculated with yellow muscardine disease pathogen, the fact that the agent could control the disease was observed by showing much low infection rate in 3.5 per cent treatment compared to non-treatment control.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.75-81
• /
• 1997

It has been used that fluorinated compounds could be applied to cosmetic products. It is that fluorinated conpounds are hydrophobicity and lipophobicity. These fluorinated compounds are reported to form a highly protective and effective film against most aggressive chemical and physical agents. PerfluropolymethyoisopropylEther has homophobicity and are colorless, odorless, tasteless and non-greasy. In this we made a success to formulate the new type of hand care cream using PFPE. PFPE are suitable thickness and chemical inertness to skin. The reason that we select PFPE for this investigation. We developed the new type hand care cream by adsorption and dispersion of PFPE. There are very stable dispersion and highly moisture diffusion control. And these characteristics were verified by actual consumer test.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1562-1566
• /
• 2006

Mesoporous silica films with three different pore sizes were prepared by using cationic surfactant, non-ionic surfactant, or triblock copolymer as structure directing agents with tetramethylorthosilicate as silica source in order to control the pore size and wall thickness. They were synthesized by an evaporation-induced self-assembly process and spin-coated on Si wafer. Mesoporous silica films with three different pore sizes of 2.9, 4.6, and 6.6 nm and wall thickness ranging from $\sim$1 to $\sim$3 nm were prepared by using three different surfactants. These materials were optically transparent mesoporous silica films and crack free when thickness was less than 1 m m. The photoluminescence spectra found in the visible range were peaked at higher energy for smaller pore and thinner wall sized materials, consistent with the quantum confinement effect within the nano-sized walls of the silica pores.

• YAKHAK HOEJI
• /
• v.38 no.1
• /
• pp.46-56
• /
• 1994

Daily oral administration to Sprague Dawly rats for 4 weeks of DWP-301, at doses of 0, 500, 1000, 2000 mg/kg presented following results; 1) No animals died and there were no significant differences in general signs, body weight, food consumption, urinalysis haematological, biochemical, gross pathological and histopathological examination between control and treated rats. 2) Water consumption, pH-, protein- urobilinogen-, ketone-values in urine were significantly increased in the treated male and female rats. It is supposed that these differences in animals are a consistent feature of repeated overdosage with test suspensions. The results indicate that the non toxic dose of test compounds in rats is over 2000 mg/kg in this test system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.315-318
• /
• 1995

The optimum design problem of a coat-hanger die is solved by the inverse formulation. The flow in the die is analyzed using three-dimensional model. The new model for the manifold geometry is developed for the inverse formulation. The inverse problem for the optimum die geometry is formed as the optimization problem whose objective function is the linear combination of the square sum of pressure gradient deviation at die exit and the penalty function relating to the measure of non-smoothness of solution. From the several iterative solutions of the optimization problem, the optimum solution can be obtained automatically while producing the uniform flow rate distribution at die exit.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2274-2278
• /
• 2011

Verapamil is a calcium channel blocker and is classified as a class IV anti-arrhythmic agent. It is used in the control of supra ventricular tachyarrhythmias, and in the management of classical and variant angina pectoris. It is also used in the treatment of hypertension and used as an important therapeutic agent for angina pectoris, ischemic heart disease, hypertension and hypertrophic cardiomyopathy. Verapamil commonly co-administered with NSAIDs (non-steroidal anti-inflammatory drugs) i.e. diclofenac sodium, flurbiprofen, Ibuprofen, mefanamic acid and meloxicam. A simple and rapid RP-HPLC method for simultaneous determination and quantification of verapamil and NSAIDs was developed and validated. The mobile phase constituted of acetonitrile: water (55:45) whose pH was adjusted at 2.7 and pumped at a flow rate of 2.0 mL $min^{-1}$ at 230 nm. The proposed method is simple, precise, accurate, low cost and least time consuming for the simultaneous determination of verapamil and NSAIDs which can be effectively applied for the analysis of human serum.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.999-1004
• /
• 1999

Two compact sized globular proteins, β-lactoglobulin and α-lactalbumin were kinetically characterized at the aqueous solution surface with the measurement of surface pressure (π) and surface concentration (Γ) via a radiotracer method. The adsorption kinetics was of diffusion control at early times, the rates of increase of πand Γ being lower at longer times due to growing energy barrier. At low concentrations, an apparent time lag was observed in the evolution of π for β-lactoglobulin but not for α-lactalbumin which was shown to be due to the non-linear nature of the p- G relationship for the former. The area per molecule of an adsorbed β-lactoglobulin during adsorption was smaller than that for spread monolayer since β-lactoglobulin was not fully unfolded during the adsorption. For α-lactalbumin, however, no such difference in the molecular areas for adsorbed and spread monolayer was observed indicating thereby that α-lactalbumin unfolded much more rapidly (has looser tertiary structure) than β-lactoglobulin. Surface excess concentrations of α-lactalbumin was found to evolve in two steps possibly due to the change in the orientation of the adsorbed protein from a side-on to an end-on orientation.

• Archives of Pharmacal Research
• /
• v.9 no.3
• /
• pp.145-152
• /
• 1986

Magnetically reponsive gelatin microspheres for the targeting of drugs have been prepared using a water-in-oil emulsion technique with chemical cross-linking of the protein. The manufacturing variables affecting microsphere size, size distribution and surface characteristics have been examined as well as the magnetic responsiveness in vitro. Sesame oil was utilized for non-aqueous phase and magentic gelatin microspheres of different size from 1. 89 to 14.88 $\mu\textrm{m}$ in mean diameter could be obtained with variation of HLB values of non-ionic surfactants. The content of magnetite which uniformly distributed throughout the microspheres was 26.7% (w/w). It was possible to control the localization of magnetic gelatin microspheres at specific sites within capilary models by using external magnetic field of under 5K gauss.

• Elastomers and Composites
• /
• v.33 no.2
• /
• pp.103-109
• /
• 1998

The determination method of successful operation conditions to control the temperature and pressure in autoclave after non-taping vulcanization process was represented. Heat and mass balances were constructed to predict the mass flow rates of air, steam, and condensed water into or from autoclave when the temperature and pressure in the autoclave were to be controlled in the desired profiles. The balance equations were solved by appropriate mathematics, and the solution was applied to an autoclave system where the temperature and pressure were linearly decreased. The resulting solutions were illustrated in graphs.

• Journal of Powder Materials
• /
• v.22 no.1
• /
• pp.21-26
• /
• 2015

In this study, the control of microstructure for increasing surface roughness of Al with an electro-chemical reaction and a post treatment is systematically investigated. The Al specimen is electro-chemically treated in an electrolyte. In condition of the post treatment at $100^{\circ}C$ for 10 min, a change of the surface microstructure occur at 50V (5 min), and a oxidized layer is at 400V, to which lead a decreasing surface roughness. The minimum temperature of the post treatment for a change of microstructure is $80^{\circ}C$. Moreover, in the condition of 300V (5 min), the electro-chemical reaction is followed by the post treatment at $100^{\circ}C$, the critical enduring time for the change of microstructure is 3 min. The longer post treatment time leads to the rougher surface. The treated Al specimen demonstrate better heat release ability owing to the higher surface roughness than the non-treated Al.