• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.179-184
• /
• 1994

다입력/단일출력 모형을 이용하여 소음/진동원을 규명할 때 입력들간의 상관관계가 존재하면 이들 사이의 우선순위 결정은 매우 중요한 문제가 된다. 본 실험에서는, 이러한 상관관계를 입력들간에 구성되는 선형계 H$_{xy}$(f)로부터 힐버트 관계와 충격응답함수의 특성을 살핌으로써 우선순위를 결정하였으며, 부분 기여도함수 기법을 적용하여 차량의 실내 소음원과 전달경로에 대한 정보를 얻을 수 있었다. 그러나 충격응답함수와 전달함수의 힐버트 관계를 이용한 우선순위 결정법의 상대적인 차이점, 오차등에 대해서는 앞으로 더 연구 되어야 할 과제이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.9-14
• /
• 1990

맥동 연소기는 기존의 연속 연소식 연소기에 비하여 높은 열효율, 소형화, 연소과정의 개선, 시동후 점화플러그 및 송풍팬의 불필요, 자력 배기와 장시 간 안전 운전등의 장점들로 인하여 최근 연구대상으로서 주목을 받고 있다. 맥동연소 현상은 1800년경부터 알려졌음에도 불구하고 기본적인 연소메카니 즘 및 기본동작 원리에 대한 미비점 및 높은 소음 등으로 인하여 종래의 연 구는 거의 실험을 통하여 이루어 졌으며 이러한 것들이 현재까지도 맥동 연 소기의 발전에 걸림돌이 되고 있다. 맥동 연소기가 산업용 및 가정용 열기기 로서 사용되기 위하여 진동과 소음의 감소에 대한 엄격한 요구를 만족하지 않으면 안된다. 따라서, 그에 대한 효과적인 방지 설계를 하기 위하여 진동 원과 소음원이 어느 부위에서 전달되어 오는지를 파악하는 것이 중요하다.. 본 연구에서는 맥동연소기의 소음원을 규명하기 위하여 종래에 사용되어 온 주파수 응답함수법과 소음원간에 강한 상관관계가 존재하는 경우에 사용되 는 기여도함수법을 이용하여 다차원 스펙트럼해석법에 의하여 입출력간의 기여관계를 규명하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.431-438
• /
• 2001

This paper present experimental results of source identification for non-minimum phase system. Generally, a causal linear system may be described by matrix form. The inverse problem is considered as a matrix inversion. Direct inverse method can\`t be applied for a non-minimum phase system, the reason is that the system has ill-conditioning. Therefore, in this study to execute an effective inversion, SVD inverse technique is introduced. In a Non-minimum phase system, its system matrix may be singular or near-singular and has one more very small singular values. These very small singular values have information about a phase of the system and ill-conditioning. Using this property we could solve the ill-conditioned problem of the system and then verified it for the practical system(cantilever beam). The experimental results show that SVD inverse technique works well for non-minimum phase system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.27-31
• /
• 1996

연사기는 장섬유가 천연섬유와 유사한 섬유의 성질을 갖도록 하거나 면사, 모사 등의 단섬유사의 인장강도를 높여주기 위해서 실을 꼬아주는 기계를 가리키며 여러 가지의 연사기 가운데 생산성이 높은 2-for-1 연사기가 널리 사용되고 있다. 2-for-1 연사기는 고정된 급사 보빈과 이것을 관통하는 중공스핀들, 실이 통과하는 구멍(yarn guide)을 가진 디스크와 실을 감는 장치등으로 구성되어 있다. 고정된 보빈에서 풀려 나온 실이 스핀들을 거쳐 회전하는 yarn guide를 통과하면서 실이 한 번 꼬이고 yarn guide를 빠져나온 실이 감기면서 다시 꼬이므로 1회전당 2회 꼬이게 되어 2-for-1이라는 이름이 붙여졌다[1]. 2-for-1연사기의 스핀들은 대개 10,000-15,000rpm으로 회전하며 고속으로 올라갈수록 생산성이 증대되기 때문에 고속화를 위한 노력이 계속되고 있으나 고속화를 가로막는 중요한 애로기술의 하나가 소음, 진동저감기술이다. 본 연구에서는 스핀들 32개짜리로 특별제작된 2-for-1 연사기에서 가장 중요한 소음으로 인식되고 있는 스핀들 소음의 소음원인을 규명하고자 하였다. 소음원인의 분석에는 다중입력/단일출력(MISO)모형을 이용한 신호 해석법을 사용하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.629-633
• /
• 2005

The reduction of the Vehicle interior noise has been the main interest of NVH engineers. The driver's perception on the vehicle noise is affected largely by psychoacoustic characteristic of the noise as well as the SPL. In particular, the HVAC sound among the vehicle interior noise has been reflected sensitively in the side of psychology. In previous study, we have developed to verify identification of source for the vehicle HVAC system through multiple-dimensional spectral analysis. Also we carried out objective assessments on the vehicle HVAC noises and subjective assessments have been already performed with 30 subjects. In this study, the linear regression models were obtained for the subjective evaluation and the sound quality metrics. The regression procedure also allows you to produce diagnostic statistics to evaluate the regression estimates including appropriation and accuracy. Appropriation of regression model is necessary to $R^2$ value and F-value. And testing for regression model is necessary to Independence, Homoscedesticity and Normality. Also we selected optimum layout of damping material using Taguchi method. As a result of application, sound quality is improved by more quiet, powerful, expensive, smooth.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.93-100
• /
• 1993

With increasing technology, requirement to car noise and related dynamics are getting competitive keypoint. Unfortunately, vibro - acoustic behavior of a car is nowadays only possible after development of prototypes. But, obviously, in the Area of Research, many of Industrials, Universities and research centers try to codevelop the design tools to predict the vibro-acoustic behaviors. At this stage, it is more realistic to represent the existing technologies in order for the engineer to get their own know-how to design and to Integrate existing techniques, to setup their test facility, and to develope some tools with which they can successfully predict noise levels of car in the design phase. Moreover, most of the theories which will be represented in this paper can be used in the design phase. At any way, finding the cause of trouble shooting is more urgent than the design of a car to the test engineer. In this paper, transfer path analysis, noise source identification, and the key test method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of finding characteristics of joint and welding part will be introduced. Most parts of this paper was quoted from the papers of LMS.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1061-1071
• /
• 2000

Linear cyclic systems (LCS's) are a class of systems whose dynamic behavior changes periodically. Such a cyclic behavior is ubiquitous in systems with fundamentally repetitive motion. Yet, the knowledge of the noise and vibration transmission paths in LCS's is quite limited due to the time-varying nature of their dynamics. The first part of this two-part paper derives a generic expression that describes how the noise and/or vibration are transmitted between two (or multiple) points in the LCS's. In Part II, experimental validation of the theoretical development of Part I is provided. The noise and vibration transmission paths of the scroll and rotary compressors (two typical LCS's) are examined to show that the LCS's indeed generate a series of amplitude modulated input signals at the output, where the carrier frequencies are harmonic multiples of the LCS' fundamental frequency. The criterion proposed in Part I to determine how well a given LCS can be approximated as a linear time-invariant systems (LTIS) is applied to the noise and vibration transmission paths of the two compressors. Furthermore, the implications of the experimental validations/applications are discussed in order to assess the applicability of the noise/vibration source and transmission path identification techniques based on the assumption that the system under consideration is linear and time-invariant.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.73-83
• /
• 2014

Thanks to the development of diverse audio editing Technology, audio file can be easily revised. As a result, diverse social problems like forgery may be caused. Digital forensic technology is actively studied to solve these problems. In this paper, a hand-held device identification method, an area of digital forensic technology is proposed. It uses the noise features of devices caused by the design and the integrated circuit of each device but cannot be identified by the audience. Wiener filter is used to get the noise sounds of devices and their acoustic features are extracted via MIRtoolbox and then they are trained by multi-layer neural network. To evaluate the proposed method, we use 5-fold cross-validation for the recorded data collected from 6 mobile devices. The experiments show the performance 99.9%. We also perform some experiments to observe the noise features of mobile devices are still useful after the data are uploaded to UCC. The experiments show the performance of 99.8% for UCC data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.671-677
• /
• 2009

A reaction wheel is commonly used, as an important actuator, to control the attitude of a satellite. Operation of the reaction wheel plays a role of an excitation source to loading equipment inside the satellite. As requirements for environmental vibration to manifest the performance of precision equipment are getting more stringent, the research for analysis or reduction of unwanted action force in high frequency range when operating the reaction wheel is necessary. In this paper, the procedure to extract input forces and damping of a rotor system of reaction wheel is suggested. The analysis for measured action forces of reaction wheel is accomplished and important higher harmonics of action forces are determined. The input forces and damping of the rotor system are, then, extracted by curve-fitting and a particular solution for input force.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.263-271
• /
• 2010

A reaction wheel is commonly used, as an important actuator, to control the attitude of a satellite. Operation of the reaction wheel plays a role of an excitation source to loading equipment inside the satellite. As requirements for environmental vibration to manifest the performance of precision equipment are getting more stringent, the research for analysis or reduction of unwanted action force in high frequency range when operating the reaction wheel is necessary. In this paper, the procedure to extract input forces and damping of a rotor system of reaction wheel is suggested. The analysis for measured action forces of reaction wheel is accomplished and important higher harmonics of action forces are determined. The input forces and damping of the rotor system are, then, extracted by curve-fitting and a particular solution for input force.