• 한국수소및신에너지학회논문집
• /
• 제8권1호
• /
• pp.5-10
• /
• 1997

Because of environmental pollution and reserve limitations of fossil fuels, several alternative energies have been developing. One of them, the hydrogen is researched as a highly probable solution. In this study pure hydrogen gas and oxygen gas are burned in combustor to reduce the emission, and a gas turbine is used. Cooling water around the combustor recovers the cooling heat loss to useful work by being expanded from liquid to vapor, being injected into the combustor and making pressure rise with working fluid to get more turbine power. Because pure hydrogen and oxygen are used, there is no carbonic emission such as CO, $CO_2$, HC nor $NO_x$, and $SO_x$. The power is obtained by turbine system, which makes lower noise and vibration than any reciprocating engine. Running of a turbine is searched under various conditions of hydrogen flow rate and water injection rate. Maximum speed of the turbine is obtained when the combustion reaches steady state. It is enable to determine the optimum rate between hydrogen flow and water injection which makes turbine run maximum speed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.483-486
• /
• 2006

The fan is widely used to cool high heat flux generated as of the electronic communication device consoles. It, however, makes a lot of noises that interfere considerably with the operation environment. This study was conducted to obtain the cooling design technology of the consoles through being equipped with the Heat Pipe Heat Exchangers (HPHE) together with low revolution fans in place of existing fans for the cooling technology of the forced convection. Not only the sealed type consoles but the HPHE were also designed so as to cool effectively the heat generated from the inside of the console. The simulation was conducted by computational numerical analysis along with its experiments. The results of the numerical analysis and experiments were compared in order to improve the cooling technology of the consoles mounted with the HPHE. Consequently, instead of loud fan noise generated as of existing forced convection methods, the cooling technology of HPHE can remarkably improve many problems such as the operation environment, indoor dust, malfunction caused by pollution sources and so on.

• 대한기계학회논문집B
• /
• 제31권6호
• /
• pp.507-513
• /
• 2007

This study represents the temperature uniformity in catalytic converter. Present research model type is a monolithic catalytic converter. This type was been widely used for complying the regulations of pollutant emissions from automobiles. The mean experimental parameters are engine speed and ceramics monolith in the catalytic converter. The experimental test engine model used was the 124.1cc motorcycle engine. The experimental study using thermal imaging method shows the megaphone type model has larger effective area than the basic model. The rate of effective area in the basic model is about 8.9 % and the megaphone type model are 41.52 %, 34.60 %, 33.43 %, 25.43 %, 17.82 % according to the diffuser angle $4^{\circ}\;to\;8^{\circ}$. In conclusion, the megaphone type monolithic converter has higher efficiency of reducing the pollution with less noise compared to the basic shape. We believe this will be very important as a design guide of the advanced motorcycle.

• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.525-531
• /
• 2011

최근 지구환경에 대한 전 세계적인 관심증가에 따른 친환경 이동수단에 대한 수요가 늘고 있다. 휘발유를 에너지원으로 하는 내연기관 이륜차의 경우 소음 공해와 배기가스 배출로 인해 국제적으로 전기이륜차로의 보급을 추진하고 있다. 이에 정확한 전기이륜차 성능평가의 필요성이 증가하고 있다. 전기이륜차의 성능을 평가하는 방법은 도로에서 주행 시험하는 방법과 실내에서 차대동력계를 이용한 시험방법이 있다. 차대동력계는 전기이륜차가 도로에서 주행하는데 받는 주행 저항을 전기모터에 의해 재현시켜 준다. 이때 도로부하 설정은 차대동력계에 의한 시험의 결과에 영향을 준다. 본 논문에서는 차대동력계를 이용한 성능평가의 중요한 설정 값인 도로부하 설정에 대한 방법인 테이블법과 타력주행 시험에 의한 도로부하 설정의 차이에 대해 비교 분석하였다.

• 대한가정학회지
• /
• 제35권5호
• /
• pp.239-248
• /
• 1997

to design nature-affinitive, reasonable and effcient thermal environment plannings and facilities, the holding patterns of heating-cooling facilities·accessory devices and residents' evaluation in Cheju Province were surveyed as well as residents' understanding for them. Major findings of this study are summarized as follows: 1) In the cooling system, the percentage of air-conditioner possessor was 19.4%, which was lower possessive rate than mainland's. The location of air-conditioner was mainly public area. That is, 55.3% of the location is livingroom, and the rest was Anbang. the general cooling accessory device was a fan. It was frequently used at the children's room and the dining room. The possessive patterns of air-conditioner depend on the characteristics of residents, such as the academic carrier and the average monthly income. Characteristics of house for air-conditioner possess depend on the location, house type, the size of floor space. 2) In the heating system, individual heating system reached to 57.3%. Heating accessory devices were oil stove and electric heating blanket. Only 32.2% of survey population were holders. 3) Residents preferred better ventilated room arrangement, which was characteristic of subtropical areas. 4) The preferred condition for heating-cooling facilities and accessory devices were strong solidity, less air pollution, and less noise.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.561-568
• /
• 2005

This paper proposes a method that distributes the load power and stores the regenerated energy for a hoist-load system using the supercapacitor, an energy storage device. The crane, which is a representative hoist-load system, operates in two modes. The first is the hoist-up mode in which the load container is lifted up: the maximum power is required at the end of acceleration. The second is the hoist-down mode in which the load container is lifted down; the regenerated energy is wasted by the resistor In this paper, the supercapacitor stores the regenerated energy in the hoist-down operation and supplies the peak power demand in the hoist-up operation. The same structure as the commercially available three-phase inverter is proposed as a bidirectional do-dc converter to charge and discharge the supercapacitor. A power control algorithm is proposed to optimize the load sharing between the generator and the supercapacitor. Using the proposed method, it is effected that the generator size can be cut down to one third of the original one; it leads to the reduction of the fuel consumption, noise and air pollution. Simulation and experimental results verify the effectiveness of the Proposed method.

• 기술사
• /
• 제25권1호
• /
• pp.11-14
• /
• 1992

얼마전까지만 해도 우리나라는 조용한 아침의 나라, 동방예의지국이라 예찬되어 왔으며, 아름다운 산하는 금수강산이라 불리어져 왔다. 비록 창호지 한장으로 바른 창문이었지만 소음공해같은 것은 결코 느끼지 않고 살았으며, 창호지를 통하여 전달되는 첫새벽의 닭우는 소리는 소음이라기 보다는 장부의 단잠을 깨워주는 자연음으로서의 낭만이 있었다. 그러나, 이젠 사정이 크게 달라졌다. 지난 40년 동안에 우리나라 경제가 고도성장을 이룩함으로써 우선 국민생활은 풍요로와 겼으나 대소 공장과 사업장 및 교통혼잡으로부터 The아져 나온 각종 오염물질이 엄청나게 증가하여 호흡하는 공기와 마시는 물, 곡물이 자양되는 토양은 병들어 가고 있을 뿐만 아니라 옛날에는 생각지도 못했던 온갖 소음ㆍ진통으로 우리는 포장되어 살아가고 있다 해도 과언이 아니다. $\ulcorner$소음진동규제법$\lrcorner$에 소음이란 기계ㆍ기구ㆍ시설 기타 물체의 사용으로 인하여 발생한 강한 소리라 정의하고 있다. 말할 것도 없이 이는 인위적으로 발생되는 시끄러운 소리를 의미하며, 이러한 소음을 다소나마 피하기 위해 창문을 알루미늄샤시 유리창으로 바꾸어 커텐을 치고, 출입문을 두중한 원목 도어로 교체 해도 다양해지고 강해진 소음공해를 막기는 어려운 세상이 되 었다. 이로 인하여 우리는 생활의 안정을 위협 받게 되었으며, 학업과 생업에 크고 작은 장해를 받으며 살아가고 있는 것이 오늘의 현실이다. 정부ㆍ기업ㆍ국민 각자가 쾌적한 환경을 보전하고자 하는 확고한 의지와 배경이 없다면 후손들에게도 대물림 될 것임에 틀림없으며, 특히 이러한 현상은 도회지에서 더욱 심화될 것임은 명약관화하다 하겠다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.883-888
• /
• 2008

Various effluents generated in cooking processes contribute a great deal to indoor air pollution among many other indoor pollutants such as dusts from outdoor and carbon dioxide from human body. Kitchen exhaust hoods are not believed to exhaust indoor contaminants properly in many cases, while generating too much noise. Instead of focusing on individual products of kitchen hoods, we should address the problem by attacking the ventilation system as a whole including vertical shafts and building air-tightness. In this study, it is intended to investigate the pressure distribution along the vertical shaft depending on various system parameters, such as shaft size, concurrent hood usage rate, roof fan, inlet pressure loss, and outdoor temperature. The maximum static pressure in the vertical shaft has been obtained using the method of design of experiments and analyzed by the analysis of variance. The results can be used for the design of kitchen exhaust systems by analyzing the pressure distributions in vertical shafts.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.9-17
• /
• 2019

Sun power generation systems which use large capacity centralized inverters have loss of power generation due to cloud and building shadows, pollution, cell deterioration, etc. To minimize loss of power generation, decentralized solar power systems using multiple micro-inverters are being proposed as an alternative. A distributed solar power system consisting of a system-connected system uses power line communication to collect data from the micro-inverters. Power line communication has the advantage of using power lines without separate lines for data transmission, but in distributed solar power generation systems that use a large number of micro-inverters, the bit error rate is less reliable due to the phenomenon caused by limited transmission power, high load interference and noise, variable signal attenuation, and impedance characteristics. So we proposed wireless intelligent controller for micro-inverter that is used to build distributed solar power systems. and we design and implement that. Further, the proposed wireless intelligent controller for micro-inverter was used to establish a small-volume solar power plant to check its function and operation.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.179-182
• /
• 1995

Although air, water, and noise pollutions have been widely recognized, electromagnetic forces(EMF) hazard has been rarely recognized as a pollution and very little studies has been done in this country. Thus, in this study electromagnetic forces radiated by various home appliances, once machines, and communication equipments were measured and so were several places radiating strong EMF such as subway stations and electric substations. Among the home appliances microwave oven senates lots of magnetic field and microwaves, and electric mattress does strong magnetic field. In video game room strong magnetic and considerable electric fields were measured. It was observed strong magnetic field inside of electric powered train and very strong magnetic and electric fields on some platforms. Hand-phone and car-phone radiate very hazardous level of microwaves to brain and that they rapidly come into wide use. In this study data base for various electric machines and places radiating strong EMFs were constructed and could be used for future epidemiological studies.