• 제목/요약/키워드: noise exposure

검색결과 514건 처리시간 0.028초

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

  • Byoung-Gue Min;Jong-Min Lee;Hyung Sup Yoon;Woo-Jin Chang;Jong-Yul Park;Dong Min Kang;Sung-Jae Chang;Hyun-Wook Jung
    • ETRI Journal
    • /
    • 제45권1호
    • /
    • pp.171-179
    • /
    • 2023
  • We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13㎛-0.16㎛ to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.

A case report of embryo transfer with air-transported fresh bovine embryo produced by multiple ovulation in Hanwoo

  • Sang-Yup Lee;Seong-Eun Heo;Won-Jae Lee
    • 한국동물생명공학회지
    • /
    • 제38권2호
    • /
    • pp.84-88
    • /
    • 2023
  • Because multiple ovulation embryo transfer (MOET) in cattle includes several benefits such as wide spreading of genetically superior offspring for long distance, this biotechnological method has been widely applied to Hanwoo. When the recipients are not stayed close after embryo recovery from donor, the embryos are moved to other farms via several vehicles (car, train, and airplane). However, air travel induces lesser oxygen level, increased vibration, lower air pressure, higher noise, and increased exposure of cosmic radiation to living things than ground level. It was still unknown that fresh embryos obtained from multiple ovulation of Hanwoo could maintain their fertility after being transported via air plane, the present case report introduced a clinical case of MOET in Hanwoo after shipping fresh embryos via air transportation. The donor was multi-ovulated via follicle-stimulating hormone series of injection, which was followed by a gonadotrophin-releasing hormone injection and artificial insemination twice. The embryos were recovered by the uterine flushing, packed in ministraws, transported to recipients for 6 h including 1 h air flight, and then transferred to the synchronized recipients. During pregnancy diagnosis of early gestation period, 5 of 7 recipients (71.4%) presented no heat signs and showed fetal sacs with fluid under transrectal ultrasonography. After normal gestation period, all recipients naturally delivered healthy calves (male n = 2 and female n = 3) without abortion, stillbirth, and premature birth. The present case report indicated that transportation of fresh embryos for MOET via domestic flight in Korea did not affect to their fertility.

Spam Image Detection Model based on Deep Learning for Improving Spam Filter

  • Seong-Guk Nam;Dong-Gun Lee;Yeong-Seok Seo
    • Journal of Information Processing Systems
    • /
    • 제19권3호
    • /
    • pp.289-301
    • /
    • 2023
  • Due to the development and dissemination of modern technology, anyone can easily communicate using services such as social network service (SNS) through a personal computer (PC) or smartphone. The development of these technologies has caused many beneficial effects. At the same time, bad effects also occurred, one of which was the spam problem. Spam refers to unwanted or rejected information received by unspecified users. The continuous exposure of such information to service users creates inconvenience in the user's use of the service, and if filtering is not performed correctly, the quality of service deteriorates. Recently, spammers are creating more malicious spam by distorting the image of spam text so that optical character recognition (OCR)-based spam filters cannot easily detect it. Fortunately, the level of transformation of image spam circulated on social media is not serious yet. However, in the mail system, spammers (the person who sends spam) showed various modifications to the spam image for neutralizing OCR, and therefore, the same situation can happen with spam images on social media. Spammers have been shown to interfere with OCR reading through geometric transformations such as image distortion, noise addition, and blurring. Various techniques have been studied to filter image spam, but at the same time, methods of interfering with image spam identification using obfuscated images are also continuously developing. In this paper, we propose a deep learning-based spam image detection model to improve the existing OCR-based spam image detection performance and compensate for vulnerabilities. The proposed model extracts text features and image features from the image using four sub-models. First, the OCR-based text model extracts the text-related features, whether the image contains spam words, and the word embedding vector from the input image. Then, the convolution neural network-based image model extracts image obfuscation and image feature vectors from the input image. The extracted feature is determined whether it is a spam image by the final spam image classifier. As a result of evaluating the F1-score of the proposed model, the performance was about 14 points higher than the OCR-based spam image detection performance.

전자산업 공정에서 사용한 부품, 기계류 세정(cleaning) 작업 안전보건 가이드 (Development of an Occupational Safety and Health (OSH) Guide for Safely Cleaning Contaminated Machinery, Equipment, and Parts Used in the Electronics Manufacturing Process)

  • 이승희;김소연;조경이;황영우;이경희;정광재;박동욱
    • 한국산업보건학회지
    • /
    • 제33권4호
    • /
    • pp.419-426
    • /
    • 2023
  • Objectives: This study aims to develop an Occupational Safety and Health (OSH) guide for the safe cleaning of contaminated machinery, equipment, and parts used in the electronics manufacturing process. Methods: A literature review, field investigations, and discussions were conducted. An initial draft of an OSH guide was developed and reviewed by experts with significant experience in maintenance work in the electronics manufacturing process in order to refine the guide. Results: Workers involved in cleaning processes with chemicals, solvents, and abrasive blasting can face exposure to a wide range of chemicals, abrasives, and noise. Identifying potential risks associated with each cleaning technique was an essential first step toward enhancing safety measures. The OSH guide comprises approximately eleven to twelve sections spanning 20-25 pages. It includes engineering and administrative protocols systematically organized to address the necessary actions before, during, and after cleaning tasks, depending on the technique. It is recommended that airline respirator masks be used in conjunction with an air purification system to ensure adherence to air quality standard "D" for atmosphere level. The use of an oil-free air compressor is advised, preferably a stationary model that does not rely on fuel sources like diesel. Conclusions: This OSH guide is designed to protect workers involved in maintenance activity in the electronics industry and aligns with global standards, such as those from the International Organization for Standardization (ISO) and Semiconductor Equipment and Material International, ensuring a higher level of safety and compliance.

심장혈관 조영술에서 씨네(cine)촬영의 프레임변화에 따른 ESD와 DAP 및 영상의 SNR·CNR 관계 분석: 10f/s과 15f/s을 중심으로 (Analysis of the Relationships Between ESD and DAP, and Image SNR·CNR According to the Frame Change of Cine Imaging in CAG : With Focus on 10 f/s and 15 f/s)

  • 정묘영;서영현;송종남;한재복
    • 한국방사선학회논문지
    • /
    • 제12권5호
    • /
    • pp.669-675
    • /
    • 2018
  • X선 장비를 이용한 심장혈관 조영술 시 프레임 변화에 따른 입사 표면 선량과 흡수선량을 비교 분석하여 피폭의 차이를 알아보고자 하였고 image J를 통한 촬영 영상의 SNR과 CNR을 측정 분석하여 프레임 변화가 영상 화질에 주는 영향을 비롯해 검사에 있어 적절한 프레임 선택의 방안을 모색하고자 하였다. 2017년 6월부터 2017년 10월까지 본원에서 CAG를 시행한 30명(남19, 여11)을 대상으로 하였고, 환자들의 연령대는 49-82세(평균 $65{\pm}9$세), 몸무게45-91kg (평균 $67{\pm}8.9kg$), 키 150-179cm (평균 $165.1{\pm}8.9kg$), BMI 19.5-30.5(평균 $24.5{\pm}2.9$)이었다. 입사표면선량 및 흡수선량은 후향적으로 Air kerma값과 DAP를 획득하여 비교 분석 하였고 SNR과 CNR은 Image J를 통하여 측정 분석 한 후 공식에 대입하여 결과 값을 도출하였다. 통계분석을 통한 상관관계 확인을 위해 통계프로그램은 SPSS를 사용하여 프레임 변화에 따른 입사표면선량과 흡수선량 및 SNR CNR의 상관관계 등을 분석하였다. 10프레임으로 촬영할 때와 15프레임으로 촬영 할 때 모두 입사표면선량과 흡수선량관계는 통계적으로 유의하지 않았다(p>0.05). SNR과 CNR의 관계에선 10프레임으로 촬영했을 때의 SNR($3.374{\pm}2.1297$)과 CNR($0.234{\pm}0.2249$)이 15프레임에서의 SNR($4.929{\pm}2.8532$)과 CNR($0.391{\pm}0.3025$)보다 SNR $1.43{\pm}0.4861$, CNR $0.132{\pm}0.0555$로 낮았으나 통계적으로는 유의하지 않았다(p>0.05). 상관관계 분석결과에서는 BMI와 air kerma, DAP간에, air kerma와 DAP간에, SNR과 CNR간에 통계적으로 유의한 결과를 얻었다(p<0.001, p<0.001). 결론적으로 심장혈관 조영술 시 10프레임과 15프레임으로 변화를 주어 촬영하여도 입사표면선량과 흡수선량은 큰 차이를 나타내지 않았으며, 10프레임보다 15프레임 촬영에서의 SNR과 CNR이 증가하였으나 통계적으로는 유의하지 않았기에 본 논문을 통해 환자와 시술자 모두 10프레임과 15프레임 촬영으로 인한 X선 피폭 문제뿐 아니라 영상의 화질감소에 관한 우려 역시 줄어들 수 있을 것으로 사료된다.

GATE 시뮬레이션을 사용한 알루미늄 부가필터 두께에 따른 Digital Radiography의 영상 화질 비교 평가 (Comparison Evaluation of Image Quality with Different Thickness of Aluminum added Filter using GATE Simulation in Digital Radiography)

  • 오민주;홍주완;이영진
    • 한국방사선학회논문지
    • /
    • 제13권1호
    • /
    • pp.81-86
    • /
    • 2019
  • X-선 영상에서 필터를 통한 여과의 역할은 영상 형성에 유용한 광자를 이용해 환자의 피폭량을 낮춤과 동시에 영상의 대조도를 높이는 것이다. 영상을 형성하는 데 있어서 저에너지 X-선은 환자 조직의 최초 몇 cm 부위에서 흡수되고 고에너지 부분만을 통과하여 형성되므로, 방사선 여과는 여과물질을 삽입하여 저에너지 X-선을 여과물질로 하여금 흡수시켜 환자의 피폭량을 낮추고 영상의 질을 높인다. 본 연구의 목적은 시뮬레이션을 통해 이상적인 환경에서 부가 필터가 방사선 영상 촬영 시 영상의 화질에 미치는 영향을 확인하고, 실제 방사선 영상을 촬영할 경우와 비교하는 것이다. 이를 위해 시뮬레이션 프로그램인 Geant4 Application for Tomographic Emission (GATE)를 이용해 Polymethylmethacrylate (PMMA) Phantom의 실제 크기, 모양과 재질을 모사하고 부가 필터의 사용유무 및 필터의 두께에 따른 촬영 조건을 설정하여 시뮬레이션 결과 영상을 얻어냈다. 또한, Digital Radiography (DR)장비로 실제 PMMA Phantom을 필터가 없는 경우와 필터가 있을 때 그 두께를 변화시키며 촬영했다. 시뮬레이션의 결과 영상과 실제 실험을 통해 얻은 영상을 각각 Image J 프로그램을 이용해 Contrast-to-noise ratio (CNR) 평가를 실행한 뒤, 시뮬레이션 결과 영상과 최종적으로 도출된 두 영상의 변화 추이를 비교 측정했다. 실험 결과 DR장비와 시뮬레이션 영상 모두 CNR이 감소하는 추세를 보였으며, 이는 결국 영상에서의 대조도 감소로 인해 나타난 결과였다. 이론적으로 관전압 (kVp)이 증가하면 대조도가 감소하고, 이를 통해보았을 때 필터는 저에너지부의 X-선을 흡수하면서 전체적인 선량을 감소시키지만, X-선의 평균에너지를 증가시키는 역할을 한다는 것을 알아볼 수 있었다.

직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 - (Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model -)

  • 김순례;이복임;이종은;이경용;정혜선
    • 지역사회간호학회지
    • /
    • 제14권2호
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF

부가필터 사용 시 전방 산란선량에 따른 화질 영향에 대한 연구 (The Study of Affecting Image Quality according to forward Scattering Dose used Additional Filter in Diagnostic Imaging System)

  • 최일홍;김교태;허예지;박형후;강상식;노시철;박지군
    • 한국방사선학회논문지
    • /
    • 제10권8호
    • /
    • pp.597-602
    • /
    • 2016
  • 현 임상에서는 저에너지 광자를 감소시키기 위한 알루미늄 재질의 부가필터를 이용하고 있다. 하지만, 부가필터의 이용은 X-ray 경화현상으로 인하여 발생하는 산란선량이 화질에 악영향을 미칠 수 있다. 또한, 부적절한 필터 두께를 이용은 환자에게 불필요한 노출이 발생하는 선량 크리프 현상이 나타날 수 있다. 이에 본 연구에서는 부가필터 사용 시 X선 빔 경화현상으로 인한 평균 에너지 증가에 따른 전방 산란선량 발생이 영상 화질에 미치는 영향을 정량적으로 평가하기 위하여 RMS 및 RSD를 측정하였다. 연구 결과, 부가필터 두께가 증가할수록 전방산란율과 더불어 상대표준편차가 증가하는 것으로 나타났다. 본 연구에서 상대표준편차는 평균값에 대한 표준편차가 상대적 크기를 의미한다. 평균값을 신호로 표준편차를 노이즈 성분으로 판단할 때 영상의 해상력에 지표인 신호 대 잡음비가 감소하는 것으로 이해할 수 있다. 이러한 연구 결과를 바탕으로 부가필터 사용에 따른 전방산란율과 화질의 상관관계가 있음을 정량적으로 검증하였다. 결과적으로, 북미방사선방호측정위원회에서 70 kVp 이상의 관전압에서 권고하는 2.5 mmAl 두께의 필터 사용 시 사용하지 않았을 때에 비해 14.6%가 증가되었다. 이러한 연구 결과는 영상 품질 개선을 위한 필터 연구 시 기초 자료로 활용할 수 있을 것으로 사료된다.

PET-CT 검사에서 18F-FDG 투여량 감소에 대한 고찰 (Reduction of Injection Dose in 18F-FDG Fusion PET)

  • 김종필;김재일;이홍재;김진의
    • 핵의학기술
    • /
    • 제18권2호
    • /
    • pp.17-21
    • /
    • 2014
  • 최근 방사선 노출에 대한 사회적인 이슈와 함께 의료용 방사선의 이용에 대한 환자의 관심도 증가하고 있다. 현재 본원에서 시행하는 PET-CT 검사의 $^{18}F$-FDG는 EANM 권고기준대비 40% 초과하여 투여하고 있다. 따라서 최신 기술이 탑재된 장비의 성능을 파악하여, 진단적 가치를 보존하면서도 환자의 피폭선량을 최소화 시킬 수 있는 적정한 $^{18}F$-FDG의 투여량에 대해 알아보고자 한다. PET-CT 장비로는 2007년 설치된 Biograph Truepoint 40 (siemens, USA)스캐너와 2011년 설치된 동일회사의 Biograph mCT 64 (siemens, USA)를 사용하였고, 각 장비의 고유성능을 평가하기 위해 scatter phantom을 이용하여 NECR을 평가하였다. 또한 각 장비의 영상에 대한 평가를 위해 NEMA IEC Body Phantom에 $^{18}F$-FDG를 3.7, 4.44, 5.18 MBq/kg을 주입하고, 각각에 대해 bed 당 60, 70, 80, 90, 100, 110, 120초씩 받은 데이터로 장비간의 SNR을 평가하였으며, 임상적 평가를 위해 $^{18}F$-FDG 3.7, 4.44, 5.18 MBq/kg을 주입한 환자들의 데이터를 이용하여 SNR을 비교 평가하였다. 실험 결과 mCT 64의 peak NECR값은 1.65e+005 cps이고, 이것은 Turepoint 40보다 10 % 높은 수치였다. NEMA IEC body phantom을 이용한 SNR값은 $^{18}F$-FDG 3.7 MBq/kg 주입한 경우 mCT 64가 검사 시간에 따라 평균 17.9% 높았고, 4.44 MBq/kg 주입한 경우는 평균 17.4% 높았으며, 5.18 MBq/kg 주입한 경우는 평균 17.1% 높았다. 임상 환자 영상의 경우 mCT 64의 SNR값은 16.5이고, 이것은 Turepoint 40 장비보다 25% 높았다. 다시 말해, 최근 장비의 발전으로 인해 장비 성능의 평가 항목 중 하나인 NECR은 10% 증가하였고, 영상 질의 평가 항목 중 하나인 SNR은 평균 17.5% 증가하였다. 더불어 bed당 10초의 시간을 늘리면 주입량을 10% 감소를 하여도 SNR은 유지 할 수 있었다. 그러므로 신규 도입한 장비의 정확한 성능테스트를 통해 영상의 질 저하 없이 투여량을 저감하여 환자의 방사선 피폭선량을 줄일 수 있고, 또한 방사선 노출에 대한 환자의 불안감을 감소시킬 수 있을 것으로 사료된다.

  • PDF

PET/CT 저선량 적용 시 CT 감쇠보정법에 따른 피폭선량 저감효과 (Effect of the Dose Reduction Applied Low Dose for PET/CT According to CT Attenuation Correction Method)

  • 정승우;김홍균;권재범;박성욱;김명준;신영만;김영헌
    • 핵의학기술
    • /
    • 제18권1호
    • /
    • pp.127-133
    • /
    • 2014
  • PET/CT에서 환자피폭 문제로 인해 저 선량의 중요성이 강조되고 있다. 본 연구에서는 기존에 사용되던 CT 데이터를 이용한 감쇠보정법인 CTAC와 새롭게 적용된 Q.AC를 환자실험과 팬텀 실험을 통해 저 선량으로 촬영 시 PET 영상에 미치는 영향에 대해 알아보고자 한다. 실험장비는 GE사의 PET/CT Discovery 710 (GE Healthcare, USA)를 사용하였으며 팬텀실험으로 감쇠보정의 정량적 평가를 위한 NEMA IEC body phantom과 균일성 평가를 위한 Uniform NU2-94 phantom을 사용하였다. 각각의 팬텀 내부에 동위원소 18-F FDG를 70.78 MBq, 22.2 MBq 주입하고 CT조건은 저 선량조건으로 80 kVp, 10 mA로부터 일반선량 조건으로 140 kVp, 120 mA 조건까지 스캔 후 CTAC와 Q.AC 두 감쇠보정법을 적용하여 재구성하였다. PET 영상에서 일반선량 조건을 기준값으로 정하고 horizomtal profile과 vertical profile을 통해 정량평가를 시행하고 기준값과의 상대적 오차를 평가하였다. 또한 환자실험으로 정상체중 환자와 과체중 환자를 구분하여 저 선량과 일반선량으로 비교 촬영한 뒤 CTAC와 Q.AC로 재구성된 PET영상에서 주요장기별 SUV에 대한 상대적 오차와 신호 대 잡음비를 비교분석하였다. 팬텀실험 결과 저선량 조건에서 CTAC와 Q.AC로 각각 재구성한 PET 영상의 profile과 상대적 오차에서 CTAC보다 Q.AC가 기준값과의 오차가 적은 그래프를 얻었다. 환자실험의 경우 일반선량 조건에서는 정상체중 환자와 과체중 환자 모두 감쇠보정법에 따른 상대적 오차값의 변화가 적었으나 저 선량 조건에서는 정상체중 환자보다 과체중 환자에서 감쇠보정법의 변경에 의한 상대적 오차의 감소폭이 커짐으로 기준값과 차이가 감소하였다. 기존의 감쇠보정법인 CTAC는 80 kVp, 10 mA의 저선량 CT를 사용하는데 있어 PET 영상의 선속경화현상이 발생한다. 이로 인해 CTAC를 이용하여 재구성된 PET 데이터는 정량화하는데 문제가 될 수 있음을 확인했다. 반면에 새로운 알고리즘이 적용된 Q.AC는 과체중 환자의 경우 80 kVp, 10 mA 정도까지는 140 kVp, 120 mA 조건으로 촬영하여 재구성한 PET 데이터 결과와 차이가 적음을 확인할 수 있었다. Q.AC를 이용한 경우 기존보다 저 선량의 CT를 이용해 PET의 재구성에 이용할 수 있으므로 환자의 피폭을 줄이는 데 큰 역할을 할 것으로 기대한다.

  • PDF