• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.207-213
• /
• 1997

Measurements of the RF(Radio Frequency) noise spectrum from 30 MHz to 18 GHz have been conducted at 21 urban areas in Korea in 1994 and 1995. Statistical analysis of the data measured seasonally, day and night, at each different point has been performed. The results of the computer analysis on APD, NAD, and ACR[1] using GUI(Graphical User Interface) program show that the radio noise environments vary little in spring, summer, and winter, while the noise level increases a little in fall. In addition, the noise level of the night time shows a little higher than that of the day time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.544-545
• /
• 2012

In recent years, vehicle manufacturers have steadily developed fuel saving technologies such as multi-speed automatic transmission. With such a background, the Hyundai-powertech have developed the new 6-speed rear wheel drive(RWD)automatic transmission for FR vehicles. Despite having six-speed, it has the same number of planetary gears as a previously used five-speed automatic transmission and fewer brakes and one-way clutches than the 5 A/T, meaning that it is light, compact, and inexpensive. But, in addition to meshing this internal and external gear simultaneously and phase difference by the tooth contact point and the time difference occurs asymmetric and symmetric sideband noise and vibration caused by the modulation in the vehicle. In this paper presents a method for the design of the carrier phase difference by developing various theories and experiments for gear noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.713-718
• /
• 2003

The common practice to reduce the compressor noise is installing a muffler. The noise reduction performance of the muffler is the most critical one for the total noise characteristics of the compressor. In this paper, a simple impedance approach using the concept of transmissibility is employed for the acoustic analysis of the muffler, It is known that transmissibility is directly related to insertion loss, and thus transmissibility can Indicate the correct performance of the muffler. The analysis result is supported by a Finite Element Model. In addition, some experiments conducted also show that the transmissibility is mildly related to the measured sound pressure outside the compressor.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.317-322
• /
• 1998

The purpose of this present experiments was to simulate the Active noise control system using MATLAB Tool kit. The Least-Mean-Square algorithm is the most applicable one to optimize the ANC systems, even it has tight limitation. This paper shows the influence of choosing step size to the performance of the LMS adaptive filters. In addition to the simulation, this paper describes the method to design the filtered LMS algorithm to get the better performance in Active noise control. It contains the secondary-path modeling to realize the real Active noise control system in the requesting fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.397-404
• /
• 2003

In this paper, we have analyzed the level of cross-modulation noise required for CDMA mobile station and proposed a guideline for optimum design. From the analysis, the level of cross-modulation noise is determined by the system's noise figure(NF) and VCO's phase noise and there is a trade-off relationships between them. In addition, we have determined the value of LNA's IIP3 and duplexer's isolation to satisfy the above level in designing the system. Therefore, this paper will give a guideline for a selection of components in designing cdma2000 mobile station.

• Advances in aircraft and spacecraft science
• /
• v.9 no.4
• /
• pp.319-333
• /
• 2022

This work presents a numerical investigation of the aerodynamics and aero acoustics of the HVAB rotor in hover conditions. Two fully turbulent models are employed, the one-equation Spalart-Allmaras model and the two-equation k-ω SST model. Transition effects are investigated as well using the Langtry-Menter γ-Re θt transition transport model. The noise generation and propagation are being investigated using the Ffows-Williams Hawking model for far-field noise and the broadband model for near-field noise. Comparisons with other numerical solvers and with the PSP rotor test data are presented. The results are presented in terms of thrust and power coefficients, the figure of merit, surface pressure distribution, and Sound pressure level. Velocity, pressure, and vortex structures generated by the rotor are also shown in this work. In addition, this work investigates the contribution of different blade regions to the overall noise levels and emphasizes the importance of considering specific areas for future improvements.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.73-84
• /
• 2005

Hanseo University's Tae-an Airfield was opened in July, 2005 for aeronautical education such as aircraft flight, air traffic control, avionics, etc., and will play an important part as a base for local economic and industrial developments. On the contrary, the aircraft noise from the airfield will give an impact against the vicinity of the airfield and become a big issue which the airfield authority has to solve. The aim of this study is to analyse the aircraft noise contour in vicinity of the airfield and to make understand the people around the airfield how much the aircraft noise will have an effect on. For the prediction of the aircraft noise in the local area, this study showed the method to assess the aircraft noise in the developed countries for aviation, and the result to compute WECPNL by INM 6.1 after encoding the various data including environmental input data, tract, and profile. The major results of the study can be summarized as follows ; While the area with influence contour of noise from 75 to 80 WECPNL is 0.555$km^2$, the area from 80 to 85 is 0.343$km^2$, and the area with influence contour of noise over 85 WECPNL is 0.163$km^2$. In addition, there are 4 houses in the contour over 85 WECPNL and the inhabitants(10 people) in this area will have effect from the noise. Therefore Tae-an airfeild authority is preparing the noise-prevention method or noise abatement program. Finally, according to the noise contour, it is one of the best way of decreasing the effect of aircraft noise that 33 runway is assigned as calm-wind runway because there is no resident in the area around 15 threshold.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4659-4664
• /
• 2014

The noise produced in a factory is a cause of the noise complaint of the surrounding residential areas. In addition, it affects the work efficiency and health of workers. This paper presents the results of a basic study to reduce the noise generated from the blower, which is often used in the factory of a small and medium scale, using an active noise controller (ANC) in three-dimensional space. For this purpose, the simulator program, which can compare various parameters of the original noise and controlled noise, such as sound pressure levels, power spectra, and equivalent noise levels, was developed. The noise data was recorded at 17 points around a turbo fan blower currently being operated in a small-medium size factory. The simulation results showed that the power spectrum was reduced by a maximum of 40dB in the low frequency band and the average equivalent noise level attenuation was 12.6dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.2001-2007
• /
• 2014

Image signal related technology has been developing via various display equipment development and popularization of contents. However, errors occur in these image contents due to addition of excess noise from several cause during the process of general image signal data processing, transmission and storage. In terms of noise added to the image content, there are various types in accordance with cause of occurrence and form, and it is typically impulse noise, gaussian noise and complex noise which is composed of two types of overlapping noise. In this paper, complex algorithm is suggested in order to lessen the effect of mixed noise added to the image content by putting it through noise judgement process and categorizing each into impulse and gaussian noise and processing them separately. And in order to demonstrate the superiority of the suggested algorithm, PSIN(peak signal to noise ratio) was used as the standard of judgement.