• 한국자원식물학회지
• /
• 제11권3호
• /
• pp.301-306
• /
• 1998

In order to improve cultivation technuque of C. lanceolata, natural ABA was treated with foliar application periodically during differenctitation of node. The higher is concentration and the earier its foliar application was, the shoter plant height was. Especially, when $10mg;.L{-1}$ of ABA was treated at differentiated stage of 3rd node, plant height was inhibited to 60% of control. But leaf length, leaf width, and number of branches have no significant differnence in comparison wiht control. The fresh weight of subterranean part was similar to control independent of treat-time in the case of $10mg;.L{-1}$. When 1,5 and $10mg;.L{-1}$ of ABA were treated at initial differentiated node stage, plant height inhibited to 20~30% of control, but subterranean part was similar to control. All treatement showed slight antitumor activity by the P388 cytotoxic screening test.

• Journal of the Korean Wood Science and Technology
• /
• 제16권1호
• /
• pp.45-54
• /
• 1988

This study was carried out to investigate the fiber length, fiber width and fiber thickness on the longitudinal direction by the parts of culm and also specific gravity in air dry, dyna.mic mechanical properties and internal frictions by the internode and the node in Phyllostachys bambusoides Phyllostachys nigra var. henonis and Phllostachys edulis which were grown in Korea. The results obtained were as follows; 1. The variations of fiber length and fiber width on the longitudinal direction had a tendency to increase slightly from the butt and then to decrease toward the top. but there was not a definite variation for fiber thickness according to the parts of culm. 2. The specific gravity in air dry of internode was increased from the butt toward the top, but the specific gravity in air dry of node was not correlations with the parts of culm. 3. Dynamic Young's modulus of internode on the longitudinal direction was increased according to the heights of culms within each species, and there were in order of P. edulis P. nigra var. henonis and P. bambusoides. 4. Correation coefficients between the specific gravity and the dynamic Young's modulus were 0.837 in P. bambusoides 0.871 in P. nigra var. henonis and 0.935 in P. edulis and there was also highly significant for dynamic Young's modulus between the specific gravities in air dry. 5. There were not correlations between the internal frictions and the parts of internode.

• Steel and Composite Structures
• /
• 제26권4호
• /
• pp.463-471
• /
• 2018

The bolted end-plate beam-column connections have been widely used in steel structure and composite structure because of its excellent seismic performance. In this paper, the end-plate bolted connection is applied in the concrete structure, A new-type of fabricated beam-column connections with end-plates is presented, and steel plate hoop is used to replace stirrups in the node core area. To study the seismic behavior of the joint, seven specimens are tested by pseudo-static test. The experimental results show that the new type of assembly node has good ductility and energy dissipation capacity. Besides, under the restraint effect of the high-strength stirrup, the width of the web crack is effectively controlled. In addition, based on the analysis of the factors affecting the shear capacity of the node core area, the formula of shear capacity of the core area of the node is proposed, and the theoretical values of the formula are consistent with the experimental value.

• 제어로봇시스템학회논문지
• /
• 제21권11호
• /
• pp.1050-1056
• /
• 2015

In this paper, we use the characteristics of electromagnetic waves underwater attenuation for estimating linear distance between a transmitting node and receiving node, and research underwater vertical plane attenuation model for constructing the underwater localization system. The underwater localization of 2 dimensional with the plane attenuation model in the horizontal plane (H-plane) was proposed previous research. But for the 3 dimensional underwater localization, the additional vertical plane (E-plane) model should be considered. Because the horizontal plane of omnidirectional antenna has the same attenuation tendency in x-y plane according to the distance, whereas in vertical plane shows an irregular pattern in x-z plane. For that reason, in the vertical plane environment, the attenuation should be changed by the position and inclination. Hence, in this paper the distance and angle between transmitting and receiving node are defined using spherical coordinate system and derive an antenna gain pattern using half power beam width (HPBW). The HPBW is called a term which defines antenna's performance between isotropic and other antennas. This paper derives omnidirectional antenna's maximum gain and attenuation pattern model and define vertical plane's gain pattern model using HPBW. Finally, experimental verifications for the proposed underwater vertical plane's attenuation model was executed.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• 한국자원식물학회지
• /
• 제10권4호
• /
• pp.411-417
• /
• 1997

더덕의 재배기술 개선을 목적으로 Uniconazol 및 Paclobutrazol을 더덕의 생장기별로 엽면산포(葉面散布)를 행했다. Uniconazol 및 Paclobutrazol 처리는 처리시기에 관계 없이 농도가 높을수록 초장은 억제되었으며 엽면적(葉面積)의 감소를 나타냈다. Uniconazol 처리에 의한 지하부의 형질은 3절(節) 분화시의 처리를 제외한 모든 처리구에서 대조구와의 유의차가 인정되지 않았다. 그러나12절 분화시의 10mg $liter^1$ 와 100mg $liter^1$ 농도처리에서는 대조구보다 생체중(生體重)이 각각 64%, 100%의 증가를 보였다. 세포독성(細胞毒性) Screening의 결과는 대조구 및 6절 분화시 10mg $liter^1$ 처리구에서만 활성을 나타했다. Paclobutrazol 처리에 의한 지하부의 생체중(生體重)은 3절(節) 분화시의 처리를 제외한 모든 처리구에서 대조구와의 유의차가 인정되지 않았다. 그러나 12절 분화시의 10mg $liter^1$ 농도처리에 의해 조금의 증가를 보였다. 세포독성(細胞毒性) Screening의 결과는 대조구 및 모든 처리구에서 약한 활성치를 나타냈다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권10호
• /
• pp.477-482
• /
• 2005

In this paper, detent force is minimized using notch and slot-aputure width adjustment in a slotted PMLSM. This time, the moving model node technique has used to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of proposed model is decreased from 9.44[N] to 0.97[N] compare with it of basic model greatly. The thrust Is decreased 1.3[$\%$] from 342.07[N] to 337.48[N] a little. The notch is applied to PMLSM simply, the detent force is reduced greatly.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.193-200
• /
• 2019

The auto-encoder network which is a good candidate to handle the modeling of the signal strength attenuation is designed for denoising and compensating the distortion of the received data. It provides a non-linear mapping function by iteratively learning the encoder and the decoder. The encoder is the non-linear mapping function, and the decoder demands accurate data reconstruction from the representation generated by the encoder. In addition, the adaptive network width which supports the automatic generation of new hidden nodes and pruning of inconsequential nodes is also implemented in the proposed algorithm for increasing the efficiency of the algorithm. Simulation results show that the proposed method can improve the neural network training surface to achieve the highest possible accuracy of the signal modeling compared with the conventional modeling method.

• 한국자원식물학회지
• /
• 제7권1호
• /
• pp.63-66
• /
• 1994

The experiment was carried out to study the bothanical characteristics of Aconitum charmichaeli Sieb. et Zucc in Korea.The results obtained are summarized as follows ; maximum flowering date was 15 Sep. and plantheight was 65cm, stem diameter was 8.7mm, No. of node was 25 and node of flowering initiation was15th.In flowering, No. of anothers were 52 and No. of flowers were 49.In leaf, length and width was same size, lower leaf size was 2-3 times than upper leaf, lower leafarea was 8.4 times than upper leaf.In tuber, No. of tuber per plant was 8, fresh weight per tuber was 25.4g, total fresh weight per plantwas about 200g.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.254-261
• /
• 1997

In desingin plate bridges, the width-thickness ratio of flanges and webs are proportioned in such that the premature local buckling of flanges and webs prior to achievement of the full strength of plate-girders must be prevented. It is the common practive in most design codes that the flange local buckling strength and the web bend buckling strength are separately computed. In most practical plate girders, however, the flange buckles simultaneously when web bend-buckling occurs, vice versa. The primary purpose of the present study is to investigate the phenomenon, which may be called flange-web interactive buckling. Using the eight-node shell element available in the commercial multi-purpose program ABAQUS, the phenomenon was quantitatively investigated. Also presented are the effects of various factors such as the ratio of flange slenderness ratio to the web slenderness ratio, the ratio of flange width to the web depth, and the longitudinal stiffeners. A series of comparative studies with various design codes show that the present study provides more accurate and effective design basis in proportioning the flanges and webs.