Experiments were carried out to make clear the relationships among some morphological characters of four-varieties of mulberry trees. Simple correlation coefficients and particial correlation coefficients were calcultated among the characters, namely branch length, branch diameter, leaf number per branch, leaf area per branch, node number per branch, total branch wt. branch weight except leaves and leaf weight per branch of the mulberry trees. The results obtained are summarized as follows: 1. Variances of the characters and covariances between the each characters are shown in table 1, and simple correlation coefficients among various characters are shown in table 2. It was observed that there were close relationships between yield (leaf weight) and branch length, branch diameter, leaf number per branch, leaf are per branch, node number per branch, total branch weight and branch weight except leaves, respectively. 2. Partial correlation coefficients among some characters are shown in table 3. From this table, it was also observed that leaf yield of mulberry trees and leaf area are more closely related more than leaf yield and the other characters of mulberry trees in four different varieties. From the experimental studies, it was recognized that the four characters, namely branch length, branch diameter, leaf number and leaf area, should be very useful characters in the estimation of mulberry leaf yield as they could be measured. or counted easily before harvest of mulberry leaves, and are affected more in mulberry 1eaf yields than the other characters.
This study was conducted to observe the characteristics of mineral nutrient uptake of single-node cutting rose 'Versilla' and to determine optimal nutrient solution control method for soilless culture of 'Versilla' in a closed hydroponic system. Nutrient solution was managed by five different control methods: macro- and micro-element control in aeroponic system (M&M), macroelement control in aeroponic system (M), nutrient solution supplement in aeroponic system (S); electrical conductivity (EC) control in aeroponic system(EC-A); EC control in deep flow technique system(EC-D). The concentration of $NO_3$-N exceeds optimal range whereas P and Mg decreased at the later stage of plant growth with the EC control method, EC-A and EC-D. The overall mineral nutrient content increased with S. On the other hand the nutrient content at the root environment was maintained optimal with M&M and M. The nutrient solution control methods had significantly effect on the cut-flower quality. In the M&M and M, flower length, fresh weight and root activity were higher than those with the other mineral nutrients control methods. The maximal efficiency of photochemistry (Fv/Fm) was higher for M&M, M and S than that with EC-A and EC-D. Based on the above results, it is highly recommended to control nutrient solution by mineral nutrient control methods (M&M and M) in a closed hydroponic system for single-node cutting rose, 'Versillia'.
This experiment was conducted to evaluate on agronomic traits of Korean local adlay (Coix lachryma L.) germplasm, 281 cultivars (lines). The largest collected cultivars was from Kyungsangbukdo (56 cultivars), and the next was in the order of Cheonlabukdo (48 cultivars), Kyungsangnamdo (44 cultivars), Kyunggido (39 cultivars) Chungcheongnamdo (23 cultivars), Kangwondo (23 cultivars), Cheonlanamdo (17 cultivars), and Chungcheongbukdo (16 cultivars) in distribution of collected region for 281 cultivars. In the growth stages, days to emergence from seeding were required $16.4{\pm}2.03$ days, days to heading from emergence was required $73.6{\pm}5.87$ days, days to ripening from heading was required $52.3{\pm}4.91$ days and cultivation period was required $142.5{\pm}5.87$ days. Culm length was $210.3{\pm}16.39$ cm, no. of tiller per plant was $10.4{\pm}2.13$, culm diameter was $11.7{\pm}1.09$ mm, fruiting position was $4.6{\pm}0.82$ node, no. of main culm node was $11.1{\pm}0.78$, degree of lodging was $5.3{\pm}3.42$ and severity of leaf blight was $56.1{\pm}0.78$ in the growth characteristics of the germplasm. In the yield of component, no. of grains per $m^2$ was $5,938{\pm}2,152$, percentage of ripening was $67.7{\pm}33.12$, 1,000 grains weight was $123.8{\pm}33.76$ g and grain weight was $473.0{\pm}207.90$ g. Grain weight was correlates significantly positively with no. of main culm node, percentage of ripening and no. of grains per $m^2$ among agronomic traits. Correlation coefficient between grain weight and 1,000 grain weight was positive, while grain weight and severity of leaf blight was significantly negative. Correlation coefficient between grain weight and days to ripening from heading was significant negatively.
The size and topology of geometrically nonlinear dome structures are optimized thereby minimizing both its entire weight & joint (node) displacements and maximizing load-carrying capacity. Design constraints are implemented from provisions of American Petroleum Institute specification (API RP2A-LRFD). In accordance with the proposed design constraints, the member responses computed by use of arc-length technique as a nonlinear structural analysis method are checked at each load increment. Thus, a penalization process utilized for inclusion of unfeasible designations to genetic search is correspondingly neglected. In order to solve this complex design optimization problem with multiple objective functions, Non-dominated Sorting Genetic Algorithm II (NSGA II) approach is employed as a multi-objective optimization tool. Furthermore, the flexibility of proposed optimization is enhanced thereby integrating an automatic dome generating tool. Thus, it is possible to generate three distinct sphere-shaped dome configurations with varying topologies. It is demonstrated that the inclusion of brace (diagonal) members into the geometrical configuration of dome structure provides a weight-saving dome designation with higher load-carrying capacity. The proposed optimization approach is recommended for the design optimization of geometrically nonlinear dome structures.
Guinea pigs were administrated with T-2 toxin at a rate of 1 and 0.6mg/kg body weight per day for 21 days to study the immunological and pathological effects of T-2 toxin in guinea pigs. Blood was collected before T-2 treatment and on days 7, 14 and 21 of the trial for hematological and biological examinations and for the mitogen assay using lymphocytes. Myeloid: erythroid ratios were examined from the fernur bone marrow samples taken a day before T-2 toxin treatment began, on day 12 and at death. Guinea pigs received with 1mg/kg body weight of T-2 toxin daily showed leukopenic, lymphopenic and anemic signs on day 7 and 14. The mitogenic responses to the T-cell mitogen, Concanavalin A and B-cell mitogens, lipopolysaccharide were significantly depressed on day 7. Histologically, marked cellular damages including karyorrhexis and depletion of lymphocytes were observed in the actively dividing cells of the gastrointestinal tract, lymph node, spleen and bone marrow of guinea pigs.
This experiment was to evaluate the growth characteristics of lodging resistance cultivated at sandbed in rice varieties. Five varieties were used in this studies. The leaf area, leaf dry weight, culm dry weight and total dry weight of cultivated rice seedling at sandbed showed the maximal values at heading stage, but decreased according to growth development. The number of newly developed roots of rice seedlings cultivated at sand pot were the most at the 30 days seedling stage, but those were decreasing at 40 to 45 days seedling stage. Cheongmyungbyeo and Dongjinbyeo showed the most vigor in newly developed roots. The bending moment at breaking of rice internodes were the largest at the 4th node, but decreased at the top internodes. Cheongmyungbyeo and Dongjinbyeo were proved lodging resistant varieties by the bending moment. The weight of culm base was positively correlated with bending moment at breaking of rice culm, but lodging index was negatively correlated weight of culm base and root dry weight, respectively.
Wireless sensor network is used at the environment to obtain nearby information and since such information is transferred through wireless link, it causes unnecessary re-sending and disadvantage of big energy consumption at node. Because of this to select reliable, energy effective link, method of estimating quality on wireless link using RSSI(received signal strength indication), LQI(link quality indication), etc is needed on wireless link. To set up path extending survival time by reducing energy consumption of nodes at the wireless sensor network, the thesis selects with small standard deviation of LQI after obtaining LQI within each path. Additionally, LQI standard deviation routing algorithm is compared based on LQI algorithm such as minimum-LQI, hop-LQI weight and RF output -7dBm. According to the outcome, the algorithm suggested has superior characters such as the number of node, retransmission rate and network life span respectively compared to existing algorithm. Therefore, energy consumption can be efficiently reduced in case that LQI standard deviation routing scheme suggested by this paper is adapted to wireless sensor network.
Background: This study was aimed to determine the optimal vine induction method for growing of Korean schisandra (Schisandra chinensis), by comparing plant growth and fruit yields between plants grown with either fence-type (U-type) or A-type induction. Methods and Results: Plants were transplanted on August 17, 2014, and the plant height, stem node number and weight were measured every two weeks, six times from June 17, 2016. The plant height, stem node number, and leaf length and width were higher with the A-type than with the U-type induction, by approximately 37.0%, 49.1%, 27.6%, and 12.7%, respectively. Although there was no significant difference between the photosynthesis rates of plants grown with the two vine induction method, the leaf area and leaf number per plant were higher in the plants grown with the A-type than the U-type, by approximately 23.7% and 46.0%, respectively. The number of green-color pixels, in a defined area of digital camera images of creeper leaves from the inducted vines, was significantly higher in the plants grown with the A-type than the U-type. The number of fruit clusters per plant was approximately 26 and 36, under the U-type and A-type, respectively. A two fold higher total fruit weight per plant was observed in the plants grown under the A-type (250 g/plant) than the U-type (120 g/plant). Conclusions: The A-type vine induction method is optimal for cultivation of Korean schisandra.
Two determinate soybean cultivars, 'Baegunkong' and 'Namhaekong', were planted on 8 Jone, 23 June, and 8 July 1996 at Cheju at planting densities of 33, 43, 53, 63 plants per $m^2$ to determine the optimum planting density of double crop soybean for recently recommended cultivars in Cheju area at various planting dates. The plant height, and the diameter and node number of main stems decreased as planting was delayed. The plant height increased but the stem diameter and node number decreased with increasing planting density. Pod number per plant was greater for Namhaekong than for Baegunkong and was not affected by planting date. Pod number per plant decreased but pod numbers per $\textrm{m}^2$ increased with increasing planting density. The number of seeds per pod was greater at the two later plantings and fewer at the highest planting density. 100-seed weight decreased with delaying planting. The seed weight was lighter at the highest planting density for Baegunkong but there was no difference for Namhaekong among the planting densities. The seed yield of Baegunkong was greater for 23 June and 8 July plantings (2,280 and 2,420 kg/ha) than for 8 June planting (1,450 kg/ha) while that of Namhaekong was greatest at 23 June planting (2,690 kg/ha) compared with 8 June and 8 July plantings (1,890 and 2,080 kg/ha). Across the planting dates and cultivars, seed yield increased from 1,860 to 2,290kg/ha as the planting density increased from 33 to 53 plants/$\textrm{m}^2$ and then leveled off with a further increase in planting density.
KSII Transactions on Internet and Information Systems (TIIS)
/
v.10
no.11
/
pp.5229-5252
/
2016
With proliferation of diverse network access technologies, users demands are also increasing and service providers are offering a Quality of Service (QoS) to satisfy their customers. In roaming, a mobile node (MN) traverses number of available networks in the heterogeneous wireless networks environment and a single operator is not capable to fulfill the demands of user. It is crucial task for MN for selecting a best network from the list of networks at any time anywhere. A MN undergoes a network selection situation frequently when it is becoming away from the home network. Multiple Attribute Group Decision (MAGD) method will be one of the best ways for selecting target network in heterogeneous wireless networks (4G). MAGD network selection process is predominantly dependent on two steps, i.e., attribute weight, decision maker's (DM's) weight and aggregation of opinion of DMs. This paper proposes Multi-Attribute Intuitionistic Fuzzy Group Decision Method (MAIFGDM) using TOPSIS for the selection of the suitable candidate network. It is scalable and is able to handle any number of networks with large set of attributes. This is a method of lower complexity and is useful for real time applications. It gives more accurate result because it uses Intuitionistic Fuzzy Sets (IFS) with an additional parameter intuitionistic fuzzy index or hesitant degree. MAIFGDM is simulated in MATLAB for its evaluation. A comparative study of MAIFDGM is also made with TOPSIS and Fuzzy-TOPSIS in respect to decision delay. It is observed that MAIFDGM have low values of decision time in comparison to TOPSIS and Fuzzy-TOPSIS methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.