• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.800-818
• /
• 2013

Supporting video streaming over multi-hop wireless networks is particularly challenging due to the time-varying and error-prone characteristics of the wireless channel. In this paper, we propose a joint optimization scheme for video streaming over multi-hop wireless networks. Our coding scheme, called Joint Source/Network Coding (JSNC), combines source coding and network coding to maximize the video quality under the limited wireless resources and coding constraints. JSNC segments the streaming data into generations at the source node and exploits the intra-session coding on both the source and the intermediate nodes. The size of the generation and the level of redundancy influence the streaming performance significantly and need to be determined carefully. We formulate the problem as an optimization problem with the objective of minimizing the end-to-end distortion by jointly considering the generation size and the coding redundancy. The simulation results demonstrate that, with the appropriate generation size and coding redundancy, the JSNC scheme can achieve an optimal performance for video streaming over multi-hop wireless networks.

• Journal of Plant Biotechnology
• /
• v.8 no.1
• /
• pp.27-35
• /
• 2006

Plantlet regeneration in Asteracantha longifolia(L.) Nees (Acanthaceae), a medicinal herb has been achieved from seedling explants on basal MS medium. Three different seedling explants including node, internode and leaf segments on used. Of these three explant, leaf explants gave better response for both callus mediated organogenesis and direct multiple shoot induction. Number of explants showing differentiation of shout buds was higher on MS media supplemented with BA compared to kinetin. MS medium fortified with BA ($2.0mgl^{-1}$) and NAA ($0.5mgl^{-1}$) was found to be most suitable for both callus mediated organogenesis and elongation of shouts. The elongated shoots were successfully routed on MS medium fortified with NAA or IBA. Among them $0.1mgl^{-1}$ NAA or $0.2mgl^{-1}$ IBA provides better response for rhizogenesis. Regenerated plantlets were successfully established in soil where 85.4% or them developed into morphologically normal and fertile plants. RAPD profiling using four decamer primers confirmed the genetic uniformity of the regenerated plantlets and substantiated the efficacy and suitability of this protocol for in vitro propagation of A. longifolia.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1046-1054
• /
• 2002

In this paper, we propose a subnetwork-based segment restoration scheme to reduce the restoration time and restoration resources. And we compare and analyze the restoration performance according to the size of divided subnetworks. Segment restoration is based on network partitioning where a large network is divided into several small subnetworks and the end-to-end data path is divided into multiple segments according to the subnetworks. In segment restoration, the link/node failure is restored by segment instead of end-to-end path. Because most faults are restored within the subnetwork, the restoration performance can be improved. From the simulation analysis, we verified that the proposed segment restoration has advantage of restoration time and backup resource utilization.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3377-3395
• /
• 2015

Recently, several approaches to share road conditions and/or digital contents through VANETs have been proposed, and such approaches have generally considered the radial distance from the information source as well as the TTL to provision an ephemeral, geographically-limited information sharing service. However, they implement general MANETs and have not been tailored to the constrained movement of vehicles on roads that are mostly linear. In this paper, we propose a novel application-level mechanism that can be used to share road conditions, including accidents, detours and congestion, through a VANET. We assign probabilities to roads around each of the intersections in the neighborhood road network. We then use the graph representation of the road network to build a spanning tree of roads with the information source as the root node. Nodes below the root represent junctions, and the edges represent inter-connecting road segments. Messages propagate along the branches of the tree, and as the information propagates down the branches, the probability of replication decreases. The information is replicated until a threshold probability has been reached, and our method also ensures that messages are not delivered to irrelevant vehicles, independently of their proximity to the source. We evaluated the success rate and performance of this approach using NS-3 simulations, and we used IDM car following and MOBIL lane change models to provide realistic modeling of the vehicle mobility.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.271-276
• /
• 2004

In this paper. dynamic behavior of the cracked beam under a moving mass is presented using the finite element method (FEM). Model accuracy is improved with the following consideration: (1) FE model with Timoshenko beam element (2) Additional flexibility matrix due to crack presence (3) Interaction forces between the moving mass and supported beam. The Timoshenko bean model with a two-node finite element is constructed based on Guyan condensation that leads to the results of classical formulations. but in a simple and systematic manner. The cracked section is represented by local flexibility matrix connecting two unchanged beam segments and the crack as modeled a massless rotational spring. The inertia force due to the moving mass is also involved with gravity force equivalent to a moving load. The numerical tests for various mass levels. crack sizes. locations and boundary conditions were performed.

• Journal of information and communication convergence engineering
• /
• v.17 no.4
• /
• pp.246-254
• /
• 2019

This paper proposes a solution to the problem of finding a subgraph for a given instance of many terminals on a Euclidean plane. The subgraph is a tree, whose nodes represent the chosen terminals from the problem instance, and whose edges are line segments that connect two corresponding terminals. The tree is required to have the maximum number of nodes while the length is limited and is not sufficient to interconnect all the given terminals. The problem is shown to be NP-hard, and therefore a genetic algorithm is designed as an efficient practical approach. The method is suitable to various probable applications in layout optimization in areas such as communication network construction, industrial construction, and a variety of machine and electronics design problems. The proposed heuristic can be used as a general-purpose practical solver to reduce industrial costs by determining feasible interconnections among many types of components over different types of physical planes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.501-509
• /
• 2014

In NCW(Network Centric Warfare) environment, mobile nodes communicate through wireless link. But wireless link provides limited networking performance due to signal interferences or mobility of nodes. So it is quite challenge to acquire enough networking resources and use the resources efficiently. In this paper, we have proposed a P2P based tactical information sharing system which provides satisfactory visual information playout for mobile nodes(i.e., military personnel, vehicle,..) in NCW environment. Our proposed system consists of two components. One is caching-enabled switch which stores tactical information segments at its internal storage and then transports them to mobile nodes when require. Another is centralized scheduling algorithm which exploits networking resources more efficiently. To validate performance of proposed system, we performed series of experiments in wireless network testbed. Results show improved performance in terms of segment-missing ratio, networking resources usage, sharing time, and number of simultaneous playout mobile nodes with acceptable playout continuity(i.e., over 95%).

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.783-785
• /
• 2003

In recent years, the use of video in GIS is considered to be an important subject and many related studies result in VideoGIS. The virtual navigation is an important function that can be applied to various VideoGIS applications. For virtual navigation by video, the following problems must be solved. 1) Because the video route may be not exactly coincided with route that user wants to navigate, parts of several video clips may be required for single navigation. Virtual navigation should allow the user to move from one video to another at the proper position. We suggest the video segmentation method based on geographic data combined with video. 2) From a point to a destination, the change frequency of video must be minimized. The frequent change of video make user to mislead navigation route and cause the wasteful use of computing resource. We suggest methods that structure video segments and calculate weight value of each node and link.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.320-335
• /
• 2003

Location-Based Services(LBS) give rise to location-based queries of which results depend on the locations of moving objects. One of important applications of LBS is to examine tracks of continuously moving objects. Moving objects databases need to provide 3-dimensional indexing for efficiently processing range queries on the movement of continuously changing positions. An extension of the 2-dimensional R-tree to include time dimension shows low space utilization and poor search performance, because of high overlap of index nodes and their dead space. To solve these problems, we propose a new R-tree based indexing technique, namely TR-tree. To increase storage utilization, we assign more entries to the past node by using the unbalanced splitting policy. If two nodes are highly overlapped, these nodes are forcibly merged. It is the forced merging policy that reduces the dead space and the overlap of nodes. Since big line segments can also affect the overlap of index nodes to be increased, big line segments should be clipped by the clipping policy when splitting overfull nodes. The TR-tree outperforms the 3DR-tree and TB-tree in all experiments. Particularly, the storage utilization of the TR-tree is higher than the R-tree and R*-tree.

• Advances in aircraft and spacecraft science
• /
• v.4 no.5
• /
• pp.515-528
• /
• 2017

Since composite structures are widely used in structural engineering, delamination in such structures is an important issue of research. Delamination is one of a principal cause of failure in composites. In This study the electrical potential (EP) technique is applied to detect and locate delamination in basalt fiber reinforced polymer (FRP) laminate composite pipe by using electrical capacitance sensor (ECS). The proposed EP method is able to identify and localize hidden delamination inside composite layers without overlapping with other method data accumulated to achieve an overall identification of the delamination location/size in a composite, with high accuracy, easy and low-cost. Twelve electrodes are mounted on the outer surface of the pipe. Afterwards, the delamination is introduced into between the three layers (0º/90º/0º)s laminates pipe, split into twelve scenarios. The dielectric properties change in basalt FRP pipe is measured before and after delamination occurred using arrays of electrical contacts and the variation in capacitance values, capacitance change and node potential distribution are analyzed. Using these changes in electrical potential due to delamination, a finite element simulation model for delamination location/size detection is generated by ANSYS and MATLAB, which are combined to simulate sensor characteristic. Response surfaces method (RSM) are adopted as a tool for solving inverse problems to estimate delamination location/size from the measured electrical potential changes of all segments between electrodes. The results show good convergence between the finite element model (FEM) and estimated results. Also the results indicate that the proposed method successfully assesses the delamination location/size for basalt FRP laminate composite pipes. The illustrated results are in excellent agreement with the experimental results available in the literature, thus validating the accuracy and reliability of the proposed technique.