• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.793-808
• /
• 2014

The goal of this study is to evaluate and design steel plates with optimal material distributions achieved through a specific material topology optimization by using a CCARAT (Computer Aided Research Analysis Tool) as an optimizer, topologically optimally updating node densities as design variables. In typical material topology optimization, optimal topology and layouts are described by distributing element densities (from almost 0 to 1), which are arithmetic means of node densities. The average element densities are employed as material properties of each element in finite element analysis. CCARAT may deal with material topology optimization to address the mean compliance problem of structural mechanical problems. This consists of three computational steps: finite element analysis, sensitivity analysis, and optimality criteria optimizer updating node densities. The present node density based design via CCARAT using node densities as design variables removes jagged optimal layouts and checkerboard patterns, which are disadvantages of classical material topology optimization using element densities as design variables. Numerical applications that topologically optimize reinforcement material distribution of steel plates of a cantilever type are studied to verify the numerical superiority of the present node density based design via CCARAT.

• Journal of Communications and Networks
• /
• 제16권4호
• /
• pp.363-370
• /
• 2014

Despite several years of intense research, the security and cryptography in wireless sensor networks still have a number of ongoing problems. This paper describes how identification (ID)-based node authentication can be used to solve the key agreement problem in a three-layer interaction. The scheme uses a novel security mechanism that considers the characteristics, architecture, and vulnerability of the sensors, and provides an ID-based node authentication that does not require expensive certificates. The scheme describes the routing process using a simple ID suitable for low power and ID exposure, and proposes an ID-based node authentication. This method achieves low-cost communications with an efficient protocol. Results from this study demonstrates that it improves routing performance under different node densities, and reduces the computational cost of key encryption and decryption.

• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.33-40
• /
• 2005

Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.57-64
• /
• 2024

This study numerically compares optimum solutions generated by element- and node-wise topology optimization designs for free vibration structures, where element-and node-wise denote the use of element and nodal densities as design parameters, respectively. For static problems optimal solution comparisons of the two types for topology optimization designs have already been introduced by the author and many other researchers, and the static structural design is very common. In dynamic topology optimization problems the objective is in general related to maximum Eigenfrequency optimization subject to a given material limit since structures with a high fundamental frequency tend to be reasonable stiff for static loads. Numerical applications topologically maximizing the first natural Eigenfrequency verify the difference of solutions between element-and node-wise topology optimum designs.

• 스마트미디어저널
• /
• 제4권1호
• /
• pp.25-32
• /
• 2015

Powering wireless sensors with energy harvested from the environment is coming of age due to the increasing power densities of both storage and harvesting devices and the electronics performing energy efficient energy conversion. In order to maximize the functionality of the wireless sensor network, minimize missing packets, minimize latency and prevent the waste of energy, problems like congestion and inefficient energy usage must be addressed. Many sleep-awake protocols and efficient message priority techniques have been developed to properly manage the energy of the nodes and to minimize congestion. For a WSN that is operating in a strictly energy constrained environment, an energy-efficient transmission strategy is necessary. In this paper, we present a novel transmission priority decision scheme for a heterogeneous body sensor network composed of normal nodes and an energy harvesting node that acts as a cluster head. The energy harvesting node's decision whether or not to clear a normal node for sending is based on a set of metrics which includes the energy harvesting node's remaining energy, the total harvested energy, the type of message in a normal node's queue and finally, the implementation context of the wireless sensor network.

• Journal of Gastric Cancer
• /
• 제20권2호
• /
• pp.190-201
• /
• 2020

Purpose: This study sought to investigate the prognostic significance of tumor-infiltrating lymphocytes (TILs) in relation to tumor location within the stomach. Materials and Methods: The densities and prognostic significance of TIL subsets were evaluated in 542 gastric cancer patients who underwent gastrectomy. Immunohistochemical staining for CD3, CD4, CD8, forkhead/winged helix transcription factor (Foxp3), and granzyme B was performed. Results: Cardia cancer was associated with significantly lower densities of CD8 T-cells and higher densities of Foxp3 and granzyme B T-cells than non-cardia tumors. Multivariate analysis showed that advanced age (hazard ratio [HR], 1.023; 95% confidence interval [CI], 1.006-1.040), advanced T classification (HR, 2.029; 95% CI, 1.106-3.721), lymph node metastasis (HR, 3.319; 95% CI, 1.947-5.658), low CD3 expression (HR, 0.997; 95% CI, 0.994-0.999), and a high Foxp3/CD4 ratio (HR, 1.007; 95% CI, 1.001-1.012) were independent predictors of poor overall survival in cardia cancer patients. In non-cardia cancer patients, total gastrectomy (HR, 2.147; 95% CI, 1.507-3.059), advanced T classification (HR, 2.158; 95% CI, 1.425-3.266), lymph node metastasis (HR, 1.854; 95% CI, 1.250-2.750), and a low Foxp3/CD4 ratio (HR, 0.978; 95% CI, 0.959-0.997) were poor prognostic factors for survival. Conclusions: The densities and prognostic effects of TILs differed in relation to the location of tumors within the stomach. The contrasting prognostic effects of Foxp3/CD4 ratio in cardia and non-cardia gastric cancer patients suggests that clinicians ought to consider tumor location when determining treatment strategies.

• Journal of Information Processing Systems
• /
• 제9권3호
• /
• pp.477-488
• /
• 2013

Wireless Sensor Networks (WSNs) are comprised of sensor nodes that forward data in the shape of packets inside a network. Proficient packet forwarding is a prerequisite in sensor networks since many tasks in the network, together with redundancy evaluation and localization, depend upon the methods of packet forwarding. With the motivation to develop a fault tolerant packet forwarding scheme a Self-Localized Packet Forwarding Algorithm (SLPFA) to control redundancy in WSNs is proposed in this paper. The proposed algorithm infuses the aspects of the gossip protocol for forwarding packets and the end to end performance of the proposed algorithm is evaluated for different values of node densities in the same deployment area by means of simulations.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 봄 학술발표회 논문집
• /
• pp.26-29
• /
• 1992

Modern tall buildings are subject to wind induced oscillations. Those oscillations can cause discomfort to the occupants. To control these motions, tuned mass dampers have been used. In this paper, component node synthesis, based on Lagrange multipliers formulation. is applied to the along-wind motion of tall buildings with multiple tuned mass dampers. Spectral densities of accelerations of top floor are compared by changing the numbers and locations of tuned mass dampers. It is found that multiple tuned mass dampers can be more effective than single tuned mass damper in reducing the acceleration response.

• 대한임베디드공학회논문지
• /
• 제4권1호
• /
• pp.42-49
• /
• 2009

Most Vehicular Ad hoc Network (VANET) applications rely heavily on broadcast transmission of traffic related information to all reachable nodes within a certain geographical area. Among various broadcast approaches, flooding is the first broadcasting technique. Each node rebroadcasts the received message exactly once, which results in broadcast storm problems. Some mechanisms have been proposed to improve flooding in Mobile Ad hoc Networks (MANET), but they are not effective for VANET and only a few studies have addressed this issue. We propose two distance-based and timer-based broadcast suppression techniques: 15P(15percent) and slotted 15P. In the first (distance based) scheme, node's transmission range is divided into three ranges (80%,15%and5%). Only nodes within 15% range will rebroadcast received packet. Specific packet retransmission range (15%) is introduced to reduce the number of messages reforwarding nodes that will mitigate the broadcaststorm. In the second (timer-based) scheme, waiting time allocation for nodes within 15% range isused to significantly reduce the broadcaststorm. The proposed schemes are distributed and reliedon GPS information and do not requireany other prior knowledge about network topology. To analyze the performance of proposed schemes, statistics such as link load and the number of retransmitted nodes are presented. Our simulation results show that the proposed schemes can significantly reduce link load at high node densities up to 90 percent compared to a simple broadcast flooding technique.

• 한국작물학회지
• /
• 제43권1호
• /
• pp.44-48
• /
• 1998

Two determinate soybean cultivars, 'Baegunkong' and 'Namhaekong', were planted on 8 Jone, 23 June, and 8 July 1996 at Cheju at planting densities of 33, 43, 53, 63 plants per $m^2$ to determine the optimum planting density of double crop soybean for recently recommended cultivars in Cheju area at various planting dates. The plant height, and the diameter and node number of main stems decreased as planting was delayed. The plant height increased but the stem diameter and node number decreased with increasing planting density. Pod number per plant was greater for Namhaekong than for Baegunkong and was not affected by planting date. Pod number per plant decreased but pod numbers per $\textrm{m}^2$ increased with increasing planting density. The number of seeds per pod was greater at the two later plantings and fewer at the highest planting density. 100-seed weight decreased with delaying planting. The seed weight was lighter at the highest planting density for Baegunkong but there was no difference for Namhaekong among the planting densities. The seed yield of Baegunkong was greater for 23 June and 8 July plantings (2,280 and 2,420 kg/ha) than for 8 June planting (1,450 kg/ha) while that of Namhaekong was greatest at 23 June planting (2,690 kg/ha) compared with 8 June and 8 July plantings (1,890 and 2,080 kg/ha). Across the planting dates and cultivars, seed yield increased from 1,860 to 2,290kg/ha as the planting density increased from 33 to 53 plants/$\textrm{m}^2$ and then leveled off with a further increase in planting density.