• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.325-329
• /
• 2015

Purpose: The aim of this study was to compare the film thicknesses of several resin cements as a function of time after mixing and to examine the effect of working time on the film thicknesses. Materials and methods: The film thickness (${\mu}m$) of 4 resin cements (n=10), 1 composite resin (Panavia F 2.0), 3 self-adhesive resin (Clearfil SA luting, Zirconite, RelyX U200) cements was measured at 20-second intervals after mixing of the cements up to 200 seconds under a load of 50 N. Linear regression was fitted to verify the effect of working time on the film thickness of each cement. Data were compared to the working time recommended by manufacturers using Wilcoxon test ($\alpha$=.05). Results: All of the materials showed a positive linear correlation between the film thickness and working time. There was no statistically significant difference between the working time based on our results and the values recommended by the manufacturers even though there was a discrepancy between those two values. Conclusion: The film thickness of resin cements could increase with the increase of working time. Working time to meet the ISO standard of $50-{\mu}m$ maximum film thickness could be different from the manufacturer's recommended value.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.128-134
• /
• 2012

Purpose: The purpose of this study was to compare the screw joint stability between the CADCAM custom-made implant abutment and the prefabricated implant abutment by measuring the reverse torque value after cyclic loading. Materials and methods: Twelve screw type implants (Implantium, Dentium Co., Seoul, Korea) were embedded in aluminum cylinder with acrylic resin. The implant specimens were equally divided into 3 groups, and connected to the prefabricated titanium abutments (Implantium, Dentium Co., Seoul, Korea), CADCAM custom-made titanium abutments (Myplant, Raphabio Co., Seoul, Korea) and CADCAM custom-made zirconia abutments (Zirconia Myplant, Raphabio Co., Seoul, Korea). The CAD-CAM milled titanium crown (Raphabio Co., Seoul, Korea) was cemented on each implant abutment by resin cement. Before cyclic loading, each abutment screw was tightened to 30 Ncm and the reverse torque value was measured about 30 minutes later. After the crown specimen was subjected to the sinusoidal cyclic loading (30 to 120 N, 500,000 cycles, 2 Hz), postloading reverse torque value was measured and the reverse torque loss ratio was calculated. Kruskal-Wallis test was used for statistical analysis of the reverse torque loss ratio. Results: The CADCAM custom-made titanium abutments presented higher values in reverse torque loss ratio without statistically significant differences than the prefabricated titanium abutments ($P$>.05). Reverse torque loss ratio of the custom-made zirconia abutments was significantly higher compared to that of the prefabricated titanium abutments ($P$=.014). Conclusion: Within the limitation of the present $in-vitro$ study, it was concluded that there was no significant difference in screw joint stability between the CADCAM custom-made titanium abutments and the prefabricated titanium abutments. On the other hand, the CADCAM custom-made zirconia abutments showed lower screw joint stability than prefabricated titanium abutments.

• Restorative Dentistry and Endodontics
• /
• v.31 no.5
• /
• pp.390-397
• /
• 2006

The purpose of this study was to evaluate the accuracy and the consistency of four different electronic apex locators in an in vitro model. Fourty extracted premolars were used for the study. Four electronic apex locators (EAL) were Root ZX, Smarpex, Elements Diagnostic Unit (EDU), and E-Magic Finder Deluxe (EMF). After access preparation, the teeth were embedded in an alginate model and the length measurements were carried out at '0.5' and 'Apex' mark using four EALs. The file was cemented at the location of the manufacturers' instruction (Root ZX, EDU, EMF: 0.5 mark, SmarPex: Apex mark). The apical 4mm of the apex was exposed and the distance from the file tip to the major foramen was measured by Image ProPlus (${\times}100$). The distance from the file tip to the major foramen was calculated at 0.5 and Apex mark and the consistency of 0.5 and Apex mark was compared by SD and Quartile of Box plots. In this study, Root ZX and EMF located the apical constriction accurately within ${\pm}0.5 mm$ in 100%, whereas SmarPex and EDU located in 90% and in 70% respectively. For Root ZX and EMF, there was no significant difference between the consistency of 0.5 and Apex mark. However, for the EDU and SmarPex, Apex mark was more consistent than 0.5 mark. From the evaluation of the consistency in this study, for Root ZX and EMF, both 0.5 and Apex mark can be used as a standard mark. And for EDU and SmarPex, the Apex mark can be recommended to be used as a standard mark.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.187-194
• /
• 2023

Purpose: A mismatched size in the post and post space is a common problem during post-fixation. Since this discordance affects the bonding strength of the fiber-reinforced composite resin post (FRC Post), a corresponding luting agent is required. The aim of this study was to evaluate the bonding strength of the FRC post according to the fitness of the fiber post and the type of luting agent. Materials and Methods: Thirty mandibular premolar were endodontic-treated and assigned to two groups according to their prepared post space: Fitting (F) and Mismatching (M). These groups were further classified into three subgroups according to their luting agent: RelyX Unicem (ReX), Luxacore dual (Lux), and Duolink (Duo). A push-out test was performed to measure the push-out bond strengths. The fractured surfaces of each cross-section were then examined, and the fracture modes were classified. Results: In the ReX and Duo subgroups, the F group had a higher mean bond strength; however, the Lux subgroup had no significant difference between the F and M groups. In the analysis of the failure modes, the ReX subgroup had only adhesive failures between the cement and dentin. Conclusion: The result of this study showed that the bond strength of an FRC post was influenced by the type of luting agent and the mismatch between the diameter of the prepared post space and that of the post.

• Journal of Preventive Medicine and Public Health
• /
• v.4 no.1
• /
• pp.77-87
• /
• 1971

A study of the knowledge, attitude and practices about the maternal and child health of 305 married women residing in apartments at the Yonsei Community Health area was conducted during the period from November to December 1970 using designed questionnaire with well trained interviewers. The results and findings obtained from the study are summarized as follows: A. Pregnancy and Birth Questions were asked about their last child. 1. 16.4% of the women were pregnant. 2. Among 281 women who had experienced delivery, 48.0% were assisted by doctor or midwisves for their last delivery, while the rest of women delivered their last baby at home without any professional's assistance. The higher the level of education or the greater exposure to mass communication, the more the deliveries were assisted by doctors or midwives. Those women who were born and raised in cities had more deliveries assisted by doctors and midwives than those who were not. 3. Kinds of delivery sheets used. Among 141 cases of home delivery 68% used cement bag paper or vinyl sheets. Three% used nothing and remained used unsterile materials. 4. Among 141 cases of home delivery, 70.2% used scissors. The rest of them used other methods. 5. 47.3% of the women had a rest for one month or more after birth. The higher the level of education, the longer the period of rest was observed. 6. 52.4% of the women fed the colostrum to their babies. This was not related to the mother's education. 7 About half(42.9%) of the women had poor knowledge about a proper diet for the pre and post natal period. B. Child Health 1. Knowledge and practice regarding to the immunization for their children: Most of the women (93.2%) could name at least one kind of immunization. 20.3% could name 6 kinds of immunization. Mothers education level did not influence their ability to name immunizations. 85.2% of children had been immunized at least once. 2. Morbidity of last born children: 48.1% of their last born children were found to have been sick during the last year. Less than half(41.5%) of the sick children were seen by doctor. 3. Counselling at well baby clinic: Most of the women(76.5%) had no counselling for their children. Registration rate at the well baby clinic at the Severance Hospital was 13.2%. 45.9% wanted to visit to the well baby clinic at the Severance Hospital. 4. Weaning Period: 44.6% said that the beginning of the weaning for their last born children was from 6 months to twelve months of age. The most important reason of weaning was the health of both mothers and children. 5. Knowledge and Practice regarding birth and death Registration: 64.6% of the women could name correctly the Ku-office as the place for the registration. Only 29.2% registered the birth of their last born children within 14 days. C. Knowledge, Attitude and Practice regarding to family planning Most: of the women accepted the idea of family planning. 97.7% could name at least one contraceptive method. 35.4% were found to be current users of contraceptive methods. The ideal number of children was 3.1 in average.