• Journal of Yeungnam Medical Science
• /
• v.4 no.2
• /
• pp.113-120
• /
• 1987

The effect of intravesical formalin instillation as a therapeutic modality for intractable bladder hemorrhage is well known. And despite clear evidence of therapeutic efficacy of intravesical cytotoxic drugs and/or BCG immunotherapy, there have been substantial recurrences during followup after transurethral resection for superficial bladder tumor. If formalin injected at the bed of superficial bladder tumor is able to coagulate and necrotize the tumor, it will be greatly helpful to the patients With recurrent bladder tumor developed during followup. Since this technique is applicable on outpatient basis, an economical as well as a psychological burden of the patients can be reduced considerably. The purpose of this study is to evaluate the effect of submucosal formalin injection on rat bladder wall, 36 healthy adult male Sprague-Dawley rats (weighing 350gm in average) were divided into 3 groups: In Group I (control group), 0.01ml of normal saline was injected submucosally at the left posterolateral wall of the bladder opened under intraperitoneal Nembutal anesthesia ; In Group II and III, 0.01 ml of 10% and 4% formalin, respectively, were administered at the same site as in the Group I, two rats in each group were sacrificed at day 1, 2, and 3, and week 1, 2 and 4 after injection, respectively. Gross and microscopic examination of the cystectomized specimen were done in each group. In the Group II, bladder stones were formed at week I, and in both the Group I and III, stones were seen at week 2 post injection. There was no significant difference III histologic findings of the bladder between the group II and III. Mucosal ulcer and/or prominent mucosal disruption was observed at 24 hours after injection in both Group II and III. Epithelial regeneration began at day 2, and was marked at day 3, and epithelial lining was almost normalized one week after injection. Subepithelial edema, telangiectasia and inflammatory reaction were prominent at 24 hours post formalin injection. Subepithelial edema persisted in moderate degree for 1 week. Telangiectasia and inflammatory reaction were noted for 4 weeks. Mild degree of these findings also appeared In the control group. Fibroblastic proliferation appeared at day 2 and persisted in moderate degree for 4 weeks. There has been no mortality or bladder perforation. These results suggest that clinical application of this technique is feasible for the selected cases of recurrent, solitary superficial bladder tumor. However, optimal dosage of formalin in relation to the size of the lesion remains to be investigated.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.65-73
• /
• 2019

The MODIS (Moderate Resolution Imaging Spectroradiometer) data in Hierarchical Data Format (HDF) have been processed using the Geospatial Data Abstraction Library (GDAL). Because of a relatively large data size, it would be preferable to build and install the data analysis tool with greater computing performance, which would differ by operating system and the form of distribution, e.g., source code or binary package. The objective of this study was to examine the performance of the GDAL for processing the HDF files, which would guide construction of a computer system for remote sensing data analysis. The differences in execution time were compared between environments under which the GDAL was installed. The wall clock time was measured after extracting data for each variable in the MODIS data file using a tool built lining against GDAL under a combination of operating systems (Ubuntu and openSUSE), compilers (GNU and Intel), and distribution forms. The MOD07 product, which contains atmosphere data, were processed for eight 2-D variables and two 3-D variables. The GDAL compiled with Intel compiler under Ubuntu had the shortest computation time. For openSUSE, the GDAL compiled using GNU and intel compilers had greater performance for 2-D and 3-D variables, respectively. It was found that the wall clock time was considerably long for the GDAL complied with "--with-hdf4=no" configuration option or RPM package manager under openSUSE. These results indicated that the choice of the environments under which the GDAL is installed, e.g., operation system or compiler, would have a considerable impact on the performance of a system for processing remote sensing data. Application of parallel computing approaches would improve the performance of the data processing for the HDF files, which merits further evaluation of these computational methods.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.11 no.1
• /
• pp.1534-1548
• /
• 1969

This experiment was conducted, making use of the 'NONG-RIM6' arecommended variety of rice for the year of 1968. Main purposes of the experiment are to explore possibilities of; a) ways and means of saving irringation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the Rotation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm lined plot, the grain weight is 23.5grams, the heaviest. Next in order is 3cm lined plot, 6cm lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of soil, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and plot irrigated at an interval of 6 days, 16.3 5) In vinyl-treated plots, it is shown that both yield and component elements are greatest in the case of the plot ith whole of $3cm/m^2$ Next in order are the plot with a hole of $2cm/m^2$ the plot with a hole of $1cm/m^2$ In the case of the plot with no hole it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water reqirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the uncontrol plot is 1,590mm as compared to 876mm(44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot 1,010mm(36% saved) for the 3cm-lined plot and 1,082mm(32% saved) for the wheat straw lined plot. In the case of the Rotation irrigation method it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm(65% saved), as compared to 617mm(61.6% saved) for plot irrigated at an interval of 7 day 672mm(57.7% saved) for plot irrigated at an interval of 6day, 746mm(53.0% saved) for the plot irrigated at an interval of 5 days, 890mm 44.0% saved) for the plot irrigated at an interval of 4 days, and 975mm(38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapotranspiration is found 2.8 around the end of month of July, as compared to 2.6 at the begining of August 3.4 around the end of August and 2.6 at the begining of August 3.4 around the end of August and 2.6 at the begining of September. 8) It is found that the saturation quantity of 30mm per day is decreased to 20mm per day though the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.225-233
• /
• 2020

By the standards and specifications for hygiene products, three test methods for formaldehyde are specified for each item type of hygiene product. After derivatization using acetylacetone and 2,4-dinitrophenylhydrazine (2,4-DNPH), formaldehyde is analyzed by spectrophotometer and high-performance liquid chromatography (HPLC). Validation of the three test methods was performed on tissue, diaper lining and waterproof layer, and panty liner products. The results of linearity (R²), limit of detection (LOD), limit of quantification (LOQ), recovery rate (%) and reproducibility (%), showed that all three methods are suitable for analyzing formaldehyde in hygiene products. After derivatization with 2,4-DNPH and cetylacetone, formaldehyde was analyzed at 0, 3, 6, 9, 24 and 48 hours by HPLC. Formaldehyde derivatized with 2,4-DNPH showed no statistically significant change in formaldehyde peak area over time (P>0.05). But, acetylacetone-derivatizated formaldehyde showed a negative correlation coefficient (r) over time (P<0.01). We investigated the residual amounts of formaldehyde in 205 hygiene products distributed in Busan. Among 74 disposable diaper products tested, 73 had low concentrations of formaldehyde (0.13-29.87 mg/kg). Moreover, formaldehyde was not detected in any of 78 tissue, 27 disposable paper towel, 12 disposable dishcloth, 7 paper cup, one brand of paper straw and 6 disposable napkin products.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.242-253
• /
• 1998

South Korea has been producing asbestos over 60 years. The use of asbestos was over 50 years for production of asbestos slate and 27 years for asbestos friction materials including asbestos textile and brake-lining. Thus, it can be supposed that asbestos related diseases such as asbestosis, lung cancer and mesothelioma could be found in the vulnerable workers exposed to asbestos in 1955-1975, given the average latency period of 10-30 years. Asbestos was produced primarily by Japanese during World War II In Korea. The production of chrysotile peaked to 4,815 tons in 1944. From 1978 to 1984, 10,000 tons of asbestos were produced annually. However, the production was interrupted by raising labor costs and extinction of mine reserves, and finally they had to depend on import for the need of asbestos. In 1945, there were 16 asbestos mines, in total, with the addition of new asbestos mines in South Korea. Imports of asbestos was increased from 74,000 tons to 95,000 tons during the period of 1976 - 1992. But the imports was reduced to 88,000 tons in 1995. Since, in addition to the import of asbestos itself, the imports of asbestos products were increased as well and the accumulation of asbestos reached to 30,000 tons during the period of 1964 to 1993. In 1965, there was only one asbestos company with 207 employees. But the size of asbestos industry has been expanded so much that 118 asbestos companies could be found in 1993 with 1,476 workers. However, there was no record on the survey of asbestos concentration to which workers were exposed in any companies in 1983. The record of the air-borne concentration of the asbestos in textile working places in 1984 showed 6.7 fibers/cc by geometric mean(GM), but it was reduced to 1.2 fibers/cc in 1993. GMs of asbestos in working places for construction materials and asbestos textiles were also decreased from 1.7 fibers/cc to 0.55 fibers/cc during the period of 1984 - 1996.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.226-245
• /
• 2019

Beopjusa Gwaebultaeng (Large Buddhist Painting), designated as Treasure No. 1259, was painted in 1766 and featured Yeorae (Buddha) at the center in the style of a single figure. It is the longest existing buddhist painting and was created by Duhun, a painter who was representative of 18th century Korean artists. His other remaining work is Seokgayeorae Gwaebultaeng (1767) in Tongdosa Temple. Considering their same iconography, they are assumed to have used the same underdrawing. Duhun had a superb ability to maintain a consistent underdrawing, while most painters changed theirs within a year. The Beopjusa painting carries significance because it was not only painted earlier than the one in Tongdosa, but also indicates possible relevance to the royal family through its records. Beopjusa Temple is also the site of Seonhuigung Wondang, a shrine housing the spirit tablet of Lady Yi Youngbin, also known as Lady Seonhui. Having been built only a year before Beopjusa Gwaebultaeng was painted, it served as a basis for the presumption that it has a connection to the royal family. In particular, a group of unmarried women is noticeable in the record of Beopjusa painting. The names of some people, including Ms. Lee, born in the year of Gyengjin, are recorded on the Bonginsa Temple Building, the construction of which Lady Yi Youngbin and Princess Hwawan donated money to. In this regard, they are probably court ladies related to Lady Yi Youngbin. The connection of Beopjusa Gwaebultaeng with the royal family is also verified by a prayer at the bottom of the painting, reading "JusangJusamJeonhaSumanse (主上主三殿下壽萬歲, May the king live forever)." While looking into the historical characteristics of this art, this study took an approach based on scientific analysis. Damages to Beopjusa Gwaebultaeng include: bending, folding, wrinkles, stains due to moisture, pigment spalling, point-shaped pigment spalling, and pigment penetration to the lining paper at the back. According to the results of an analysis of the painting pigments, white lead was used as a white pigment, while an ink stick and indigo were used for black. For red, cinnabar and minium were used independently or were combined. For purple, organic pigments seem to have been used. For yellow, white lead and gamboge were mixed, or gamboge was painted over white lead, and gold foil was adopted for storage. As a green pigment, atacamite or a mixture of atacamite and malachite was used. Azurite and smalt were used separately or together as blue pigments.