• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.556-564
• /
• 2014

To synthesize a high-performance photocatalyst, N doped $TiO_2$ nanotubes deposited with Ag nanoparticles were synthesized, and surface characteristics, electrochemical behaviors, and photocatalytic activity were investigated. The $TiO_2$ nanotubular photocatalyst was fabricated by anodization; the Ag nanoparticles on the $TiO_2$ nanotubes were synthesized by a reduction reaction in $AgNO_3$ solution under UV irradiation. The XPS results of the N doped $TiO_2$ nanotubes showed that the incorporated nitrogen ions were located in interstitial sites of the $TiO_2$ crystal structure. The N doped titania nanotubes exhibited a high dye degradation rate, which is effectively attributable to the increase of visible light absorption due to interstitial nitrogen ions in the crystalline $TiO_2$ structure. Moreover, the precipitated Ag particles on the titania nanotubes led to a decrease in the rate of electron-hole recombination; the photocurrent of this electrode was higher than that of the pure titania electrode. From electrochemical and dye degradation results, the photocurrent and photocatalytic efficiency were found to have been significantly affected by N doping and the deposition of Ag particles.

• Korean journal of applied entomology
• /
• v.15 no.4 s.29
• /
• pp.205-214
• /
• 1976

Effect of Butachlor(2-chloro-2, 6-diethyl N-(buthoxymethyl) acetanilide), Nitrofen(2,4-dichloro-4-nitrodiphenyl ether), Benthiocarb+Simetryne(s-(4-chlorobenzyl)-N, N-diethylthiocarbamate $7\%$+2-methylthio-4, 6-bis(ethylamino)-s-triazine $1.5\%)$, Propanil (3,4-dichloropropionanilide), and Perfluidone {1. 1. 1-trifluoro-N, N-(2-methyl-4-(phenylsulfonyl) Pheny1) methanesulfon amide} on urea hydrolysis and subsequent nitrification was investigated in a flooded soil incubated at $24\pm1^{\circ}C$ for 9 weeks. 1. Butachlor and Perfluidone at the rate of 1,440 and 1,200g, ai/10a, respectively, slightly inhibited the early stage of urea decomposition, and caused a slight decrease in the production of ammomium, which, however, was recovered readily. 2. Propanil at the rate of 2,800g, ai/10a imhibited the first stage of nitrification, and brought about a slight increase in the ammonium conentration and a decrease in the concentration of nitrite and nitrate. This inhibitive effect was a little more evident at higher concentration of applied nitrogen. The other herbicides caused no inhibition of urea decomposition and subsequent nitrification even at the highest rate of application. 3. pH and Eh of the soil were not significantly affected by the herbicides tested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.364-370
• /
• 1997

Four local cattle were ($145{\pm}9.7kg$) used in a $4{\times}4$ Latin square design to study the effect of different levels of rumen degradable protein (RDP) in straw based ration on purine derivatives excretion and microbial N supply in cattle. The four rations were formulated at the same amount of energy but varying RDP approximately 50 (U0), 75 (U1), 100 (U2) and 150 (U3) percent levels of RDP requirement for maintenance. They were fed ranged from 101 to 304 g RDP/d. Apparent digestibility of all nutrients increased significantly (p < 0.01) in cattle fed ration U2 than other rations. Rumen $NH_3-N$ concentration increased from 43 to 130 mg/l in response of RDP intake. Purine derivatives excretion increased significantly (p < 0.01) with incremental level of 203 g RDP/d (U2) intake and positively correlated (r=0.69, p < 0.01, n=16) with amount of RDP intake. The rates of rumen microbial N supply were 16.8, 27.2, 39.1 and 32.9 g/d for rations U0, U1, U2 and U3 respectively. Efficiency of microbial N supply (EMNS) per kg of DOMR were 19.0, 25.3, 33.0, and 28.6 g and per MJ of ME. Intake were 0.62, 1.00, 1.44 and 1.21 g for U0, U1, U2 and U3 respectively and highest results were obtained in cattle fed U2 ration. Results of this study suggest that PD excretion and EMNS were increased as incremental level of RDP intake (U2) in local cattle.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2471-2476
• /
• 2014

The aim of the present study is to explore the possibility of utilizing loess for the adsorption of total phosphorous (T-P) and total nitrogen (T-N) in water. Batch adsorption studies were performed to evaluate the influences of various factors like initial concentration, contact time and temperature on the adsorption of T-P and T-N. The adsorption data showed that loess is not effective for the adsorption of T-N. However, loess exhibited much higher adsorption capacity for T-P. At concentration of $1.0mgL^{-1}$, approximately 97% of T-P adsorption was achieved by loess. The equilibrium data were fitted well to the Langmuir isotherm model. The pseudo-second-order kinetic model appeared to be the better-fitting model because it has higher $R^2$ compared with the pseudo-first-order and intra-particle kinetic model. The theoretical adsorption equilibrium $q_{e,cal}$ from pseudo-second-order kinetic model was relatively similar to the experimental adsorption equilibrium $q_{e,exp}$. The thermodynamic parameters such as free energy ${\Delta}G$, the enthalpy ${\Delta}H$ and the entropy ${\Delta}S$ were also calculated.

• Nuclear Engineering and Technology
• /
• v.50 no.5
• /
• pp.724-730
• /
• 2018

Chromium and chromium nitride were selected as potential barriers to prevent fuel-clad chemical interaction (FCCI) between the cladding and the fuel material. In this study, ferritic/martensitic HT-9 steel and misch metal were used to simulate the reaction between the cladding and fuel fission product, respectively. Radio frequency magnetron sputtering was used to deposit Cr and CrN films onto the cladding, and the gas flow rates of argon and nitrogen were fixed at certain values for each sample to control the deposition rate and the crystal structure of the films. The samples were heated for 24 h at 933 K through the diffusion couple test, and considerable amount of interdiffusion (max. thickness: $550{\mu}m$) occurred at the interface between HT-9 and misch metal when the argon and nitrogen were used individually. The elemental contents of misch metal were detected at the HT-9 through energy dispersive X-ray spectroscopy due to the interdiffusion. However, the specimens that were sputtered by mixed gases (Ar and $N_2$) exhibited excellent resistance to FCCI. The thickness of these CrN films were only $4{\mu}m$, but these films effectively prevented the FCCI due to their high adhesion strength (frictional force ${\geq}1,200{\mu}m$) and dense columnar microstructures.

• Journal of the korean society of oceanography
• /
• v.32 no.4
• /
• pp.191-201
• /
• 1997

To test the roles of NO$_3^-$ concentration and light as controlling factors of NO$_3^-$ uptake in the NO$_3^-$-low and -high environments and to assess the significance of night-time nitrogen (N) uptake in estimating the daily N uptake rate, 2 diel studies of N uptake were conducted in NO$_3^-$-low (the eastern part of the Yellow Sea) and NO$_3^-$-high (the marginal ice zone of the northwestern Weddell Sea) environments on June 14 to 15, 1996 and January 15 to 16, 1995, respectively. Ourobservations confirmed that NO$_3\;^-$ uptake by phytoplankton is mainly determined by ambient NO$_3^-$ concentration in NO$_3^-$-low environment and by light in NO$_3^-$-high environment, respectively, Our results suggest the need for diel studies to accurately estimate the daily N uptake rates and thus new and regenerated production because the daily rates calculated without considering the night-time N uptake would be significantly underestimated (up to 41%), particularly in the NO$_3^-$-low environment.

• Mycobiology
• /
• v.39 no.2
• /
• pp.92-95
• /
• 2011

Lignosus rhinocerus is a macrofungus that belongs to Polyporaceae and is native to tropical regions. This highly priced mushroom has been used as folk medicine to treat diseases by indigenous people. As a preliminary study to develop a culture method for edible mushrooms, the cultural characteristics of L. rhinocerus were investigated in a range of culture media under different environmental conditions. Mycelial growth of this mushroom was compared on culture media composed of various carbon and nitrogen sources in addition to C/N ratios. The optimal conditions for mycelial growth were $30^{\circ}C$ at pH 6 and 7. Rapid mycelial growth of L. rhinocerus was observed on glucose-peptone and yeast extract peptone dextrose media. Carbon and nitrogen sources promoting mycelial growth of L. rhinocerus were glucose and potassium nitrate, respectively. The optimum C/N ratio was approximately 10 : 1 using 2% glucose supplemented as a carbon source in the basal media.

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.296-302
• /
• 2011

The objective of this paper is to determine the effect of process parameters on the behavior of a 18Cr-10Mn-$0.44N_2$ nitrogen steel sample deformed by hot rolling. Compression tests were carried out at high temperatures to determine the flow stresses needed for a finite element(FE) analysis. The strain rate, ranging from 0.1 to $1.0s^{-1}$, significantly affected the flow stress at temperatures higher than $1,000^{\circ}C$. Non-isothermal rolling simulations and laboratory rolling tests were performed with plate specimens 14.5mm thick, 135mm wide and 226mm long. A rolling reduction of 15% per pass leading to a cumulative rolling reduction of 60% was determined as optimal. The extension ratio of 176.5% in the length direction was about 30.4 times greater than the extension ratio of 5.8% in the width direction. Isotropic properties for tensile strength, microstructure and grain size were measured after mock-up hot rolling tests. The results from the mockup tests were found to be in good agreement with those of the simulations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.462-463
• /
• 2007

SF6 widely used as insulating gas is rising as the environment problem. For decreasing this greenhouse gas, electrical breakdown characteristics of composite insulation composed of epoxy resins with N2, air are studied in non-uniform field. The gap of needle to plane was 3mm, 5mm. The pressure of air, nitrogen was varied within the range of 0.1~0.6MPa. The thickness of a needle is 1mm and the curvature radius of the end of needle is 100um. The diameter of a plane made of the stainless steel is 50mm. As a result of the experiment, the breakdown voltage is increased about 3 times when epoxy resins is composited. The thickness of epoxy resins filled opposite to electrode concentrated electric field weakly influences on breakdown voltage.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.14-18
• /
• 2007

SCM415 alloy was implanted with nitrogen ions using plasma source ion implantation (PSII), at a dose range of $1{\times}10^{17}\;to\;6{\times}10^{17}N^{+}cm^{-2}$. Auger electron spectrometry (AES) was used to investigate the depth profile of the implanted layer. Friction and wear tests were carried out on a block-on-ring wear tester. Scanning electron microscopy (SEM) was used to observe the micro-morphology of the worn surface. The results revealed that after being implanted with nitrogen ions, the frictional coefficient of the surface layer decreased, and the wear resistance increased with the nitrogen dose. The tribological mechanism was mainly adhesive, and the adhesive wear tended to become weaker oxidative wear with the increase in the nitrogen dose. The effects were mainly attributed to the formation of a hard nitride precipitate and a supersaturated solid solution of nitrogen in the surface layer.