• 제목/요약/키워드: nitrogen ($N_2$)

검색결과 4,403건 처리시간 0.029초

질소시용, 예초 및 재식밀도가 한국잔디(Zoysia Japonica Steud)의 생육에 미치는 영향 (Studies on the growth of Korea Lawn Grass (Zoysia japonica Steud.)in Reponse to Nitrogen Application, Clipping Treatment and Plant Density)

  • 심재성
    • 자연과학논문집
    • /
    • 제1권
    • /
    • pp.61-113
    • /
    • 1987
  • The increasing emphasis placed on the production of fine turf for lawns, golf courses, parks, and other recreational sites has led to many unsolved problems as to how such turf could be best established and mainteined. For this purpose, a series of experiments were conducted under con ditions of pot and field. The results obtained were as follows EXPERIMENT I. The effect of nitrogen fertilizer and clipping interval on Zoysia japonica. 1. Increasing the rate of nitrogen and frequent clipping increased tiller number of Zoysis japonica and the maximum number of tillers were obtained from 700 kg N application and freqnent clippings (10 days interval ) in October. Treatment of 350kg N with 10 days clipping interval increased tillers much more than those of 700 kgN with 20 and 30 days clipping intervals. 2. The average number of green leaves occurred during the growth period maximized by applying 700 kg N and clipping 10 days interval. 3. Increasing tiller numbers significantly decreased tops DM weight per tiller by clipping plants at interval of 10 and 20 days, irrespective of nitrogen applied, and with nil N, at the interval of 30 days. By applying 700 kg N, however, top DM weight per tiller increased as the number of tillers increased consistently. 4. The highest top DM weight was achieved from late August to early September by applying 350 and 700kgN. 5. During the growth period, differences in unders ( stolon + root ) DM weight occurred bynitrogen application were found between nil N and two applied nitrogen levels, whereas, at the same level of nitrogen applied, the increase in stolon DM weight enhanced by lengthening the clipping interval to 30 days. 6. Nitrogen efficiency to green leaves, stolon nodes and DM weight of root with high nitrogen was achieved as clipping interval was shortened. 7. By increasing fertilizer nitrogen rate applied, N content n the leaves and stems of Zoysiajaponica was increased. On the other hand, N content in root and stolon had little effect onfertilizer nitrogen, resulting in the lowest content among plant fractions. The largest content of N was recorded in leaves. Lengthening the clipping interval from 10 or 20 to 30 days tends to decrease the N content in the leaves and stems, whereas this trend did not appeared in stolon androot. 8. A positive correlations between N and K contents in tops and stolon were established andthus K content increased as N content in tops and stolon increased. Meanwhile, P content was not affected by N and clipping treatments. 9. Total soluble carbohydrate content in Zoysia japonica was largest in stolon and stem, and was reduced by increasing fertilizer nitrogen rate. Reduction in total soluble carbohydrate due to increased nitrogen rate was severer in the stolons and stems than in the leaves. 10. Increasing the rate of nitrogen applied increased the number of small and large vascular bundles in leaf blade, but shortened distance among the large vascular bundles. Shortening the clipping interval resulted in increase of the number of large vascular bundles but decrease ofdistance between large vascular bundles.EXPERIMENT II. Growth response of Zoysia japonica imposed by different plant densities. 1. Tiller numbers per unit area increased as plant density heightened. Differences in num ber between densities at higher densities than 120 D were of no significance. 2. Tiller numbers per clone attained by 110 days after transplanting were 126 at 40D,77 at 80D, 67 at 120D, 54 at 160D, and 41 at 200D. A decreasing trend of tiller numbers per clone with increasing density was noticable from 100 days after transplanting onwards. 3. During the growth period, the greatest number of green leaves per unit area were attainedin 90days after transplanting at 160D and 200D, and 100 days after transplanting at 40D, 80Dand 120D. Thus the period to reach the maximum green leaf number with the high plantdensity was likely to be earlier that with the low plant density. 4. Stolon growth up to 80 days after transplaning was relatively slow, but from 80 daysonwards, the growth quickened to range from 1.9 m/clone at 40D to 0.6m/clone at 200Din 200 days after transplanting, these followed by the stolon node produced. 5. Plant density did not affect stolon weight/clone and root weight/clone until 80 daysafter transplanting. 6. DM weight of root was heavier in the early period of growth than that of stolon, butthis trend was reversed in the late period of growth : DM weight of stolon was much higherthan that of root.EXPERIMENT Ill. Vegetative growth of Zoysia japonica and Zoysia matrella as affected by nitrogen and clipping height. 1. When no nitrogen was applied to Zoysia japonica, leaf blade which appeared during theAugust-early September period remained green for a perid of about 10 weeks and even leavesemerged in rate September lived for 42 days. However, leaf longevity did not exceed 8 weeks asnitrogen was applied. In contrast the leaf longevity of Zoysia matrella which emerged during the mid August-earlySeptember period was 11 weeks and, under the nitrogen applied, 9 weeks, indicating that thelife-spen of individual leaf of Zoysia matrella may be longer than that of Zoysia japorica. Clipping height had no effect on the leaf longevity in both grasses. 2. During the July-August period, tiller number, green leaf number and DM weightof Zoysia japonica were increased significantly with fertilizer nitrogen, but were not with twolevel of clipping height. This trend was reversed after late September ; no effect of nitrogen wasappeared. Instead, lax clipping increased tiller number, green leaf number and DM weight. Greenleaves stimulated by lax clipping resulted in the occurrance of more dead leaves in late October. 3. Among the stolons outgrown until early September, the primary stolon was not influencedby nitrogen and clipping treatments to produce only 2-3 stolons. However, 1st branch stoIon asaffected by nitrogen increased significantly, so most of stolons which occurred consisted of 1st branch stolons. 4. Until early September, stolon length obtained at nil nitrogen level was chiefly caused bythe primary stolons. By applying nitrogen, the primary stolons of Zoysia japonica waslonger than 1st branch stolons when severe clipping was involved and in turn, shorter than 1stbranch stolons when lax clipping was concerned. In Zoysia matrella, 1st branch stolons were muchlonger than the primary stolon when turf was clipped severely but in conditions of lax clippingthere was little difference in length between primary and 1st branch stolons. 5. Stolon nodes of both Zoysia japonica and Z. matrella were positively influenced by nit rogen, but no particular increase by imposing clipping height treatment was marked in Zoysiamatrella. Although the stolon of Zoysia japonica grew until late October, the growthstimulated by nitrogen was not so remarkable as to exceed that by nil N.

  • PDF

Effect of Mixed Treatment of Nitrogen Fertilizer and Zeolite on Soil Chemical Properties and Growth of Hot Pepper

  • Park, Jun-Hong;Park, Sang-Jo;Kwon, Oh-Heun;Choi, Seong-Yong;Park, So-Deuk;Kim, Jang-Eok
    • 한국토양비료학회지
    • /
    • 제48권1호
    • /
    • pp.44-49
    • /
    • 2015
  • Urea has been the most useful N-source, due to lower cost per unit of N. But nitrogen use efficiency of urea may be reduced because of losses from agricultural system by volatilization of ammonia to atmosphere. This study was conducted to evaluate the nitrogen efficiency and growth of hot pepper (Capsicum annuum L.) by mixed treatment with nitrogen and zeolite. They were treated with N $161kg\;ha^{-1}$, N $230kg\;ha^{-1}$, nitrogenzeolite mixture (NZM) $161kg\;ha^{-1}$, NZM $230kg\;ha^{-1}$ and N $0kg\;ha^{-1}$, respectively. In the soil chemical properties after experiment, soil pH decreased but available $P_2O_5$, EC and total nitrogen increased in nitrogen-zeolite mixture treatment. $NO_3-N$ content in the soil showed the highest level in NZM $230kg\;ha^{-1}$. NZM $161kg\;ha^{-1}$ treatment increased growth and yield of hot pepper compared to urea alone. Nitrogen utilization efficiency of hot pepper plant was 47.15% at the treatment of NZM $161kg\;ha^{-1}$, while 36.74% at N $230kg\;ha^{-1}$. These results showed that application of mixture of nitrogen and zeolite had positive influence to improve the efficiency of nitrogen utilization and increase of red pepper yield.

질소시용 및 예초간격이 한국 잔디(Zoysia japonica Steud.)의 제잔디 구성요소 특성변화에 미치는 영향 (The Effect of Nitrogen Application and Clipping Interval on the Characteristics of Several Turf Components of Korean Lawn Grass (Zoysia japonica Steud.))

  • 심재성;윤익석
    • 아시안잔디학회지
    • /
    • 제1권1호
    • /
    • pp.18-29
    • /
    • 1987
  • This study was carried out to examine the effect of nitrogen application and clipping interval on the characteristics of several turf components of korean lawngrass for the basic data of lawn management. It was treated by Split plot design with three replications. The main plots were nitrogen levels with 0, 350, and 700kgN / ha, and the sub plots were clipping intervals with 10, 20, and 30 days The results obtained are summarized as follows ; 1. Increasing the rate of nitrogen fertilizer and frequent clipping increased tiller number of korean lawngrass and the maximum number of tillers obtained in October were recorded from 700kgN application and clipping treatment of 10 days interval. Meanwhile, treatment of 350kgN with 10 days clipping interval increased tillers much more than those of 700kgN with 20 and 30 days clipping intervals. 2. The average number of green leaves occurred during the growth period maximized by applying 700 kgN and clipping 10 days interval. 3. Increasing tiller numbers significantly decreased tops DM weight per tiller by clippng plants at interval of 10 and 20 days, irrespective of nitrogen applied, and with nil N, at the interval of 30 days. By applying 700kgN however, tops DM weight per tiller increased as the number of tillers increased consistently. 4. The highest tops DM weight was achieved from late August to early September by applying 350 and 700kgN. 5. During the growth period, nitrogen application increased unders(stolon+root) DM weight, and, at the same level of nitrogen applied, the increase in stolon DM weight enhanced by lengthening the clipping interval to 30 days. 6. Nitrogen efficiency to green leaves, stolon nodes and DM weight of root with high nitrogen was achieved as clipping interval was shortened.

  • PDF

참깨의 생육 및 함유율에 미치는 시비량의 영향 (The Effects of Fertilization Level on the Growth and Oil Quality in Sesame (Sesamum indicum L.))

  • 서관석;조재성;최창열
    • 한국작물학회지
    • /
    • 제31권1호
    • /
    • pp.24-29
    • /
    • 1986
  • 참깨의 N, P, K 시비수준별 생육과 함유량, 지방산조성분포를 검토하여 얻은 결과를 요약하면, 1. 질소배비(16k/10a)시용시 초장과, 주당삭수, 착삭부위장, 분지수등은 증가되나, 삭당입수와 종실중은 표준비(8k/10a)에서 가장 많았다. 2. 가리의 배비(18k/10a)시용시에는 지상부 생육과 등숙비율이 모두 높았으며, 인산 및 가리, 배비구(N 8, P$_2$O$_{5}$ 8, $K_2$O 18k/10a)에서는 표준비(N 8, P$_2$O$_{5}$ 4, $K_2$O 9k/10a)의 종실중 91kg보다 11% 증가되었다. 3. 엽의 무기성분중 N과 $K_2$O는 파종후 20일에 가장 높았으며 이후 점차 감소되는 경향으로 N과 $K_2$O 배비시 엽의 N, $K_2$O 배비시 엽의 N, $K_2$O 함량은 증대되었다. 4. 시비수준별 함유량은 질소의 배비시용구(16k/10a)와의 P$_2$O$_{5}$ 표준시용구(4k /10a)에서 가장 많았으나, 가리에서는 차이가 없었다. 5. 지방산조성은 양질의 Oleic acid는 질소, 인산,가리의 배비구에서 가장 많았으며, Linoleic acid는 인산배비구에서 가장 높았다.

  • PDF

Arc Vapor Ion Deposition 법으로 제조된 TiN 피막의 내마모성에 관한 연구 (A Study on Wear Resistance of TiN Films Prepared by Arc Vapor Ion Deposition Process)

  • 신현식;한전건;장현구;고광진
    • 한국표면공학회지
    • /
    • 제27권1호
    • /
    • pp.36-44
    • /
    • 1994
  • The TiN films were deposited on the stainless substrates using arc vapor ion deposition process to in-vestigated the wear resistance. Pin-on-disc tests were performed to measure the volume wear loss of TiN films. The substrate bias voltages and nitrogen flow rates were selected as the deposition parameters of TiN films. It was found that the wear resistance of TiN films was enhanced with increasing bias voltages(0~-300 V) and nitrogen flow rates(220~380 SCCM). The volume wear loss TiN films were about 9.5~2.1$\times$$10^{-3}mm^3$ and 3.5~2.2$\times$$10^{-3}mm^3$ with bias voltages and nitrogen flow rates, respectively.

  • PDF

Use of Nitrate-nitrogen as a Sole Dietary Nitrogen Source to Inhibit Ruminal Methanogenesis and to Improve Microbial Nitrogen Synthesis In vitro

  • Guo, W.S.;Schaefer, D.M.;Guo, X.X.;Ren, L.P.;Meng, Qingxiang
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권4호
    • /
    • pp.542-549
    • /
    • 2009
  • An in vitro study was conducted to determine the effect of nitrate-nitrogen used as a sole dietary nitrogen source on ruminal fermentation characteristics and microbial nitrogen (MN) synthesis. Three treatment diets were formulated with different nitrogen sources to contain 13% CP and termed i) nitrate-N diet (NND), ii) urea-N diet (UND), used as negative control, and iii) tryptone-N diet (TND), used as positive control. The results of 24-h incubations showed that nitrate-N disappeared to background concentrations and was not detectable in microbial cells. The NND treatment decreased net $CH_4$ production, but also decreased net $CO_2$ production and increased net $H_2$ production. Total VFA concentration was lower (p<0.05) for NND than TND. Suppression of $CO_2$ production and total VFA concentration may be linked to increased concentration of $H_2$. The MN synthesis was greater (p<0.001) for NND than UND or TND (5.74 vs. 3.31 or 3.34 mg/40 ml, respectively). Nitrate addition diminished methane production as expected, but also increased MN synthesis.

절삭공구용 Ti(C, N)피막의 HCD식 이온도금시 공정변수의 영향 (HCD Ion Plating of Ti(C, N) Films for Cutting Tools)

  • 강형호;고경현;안재환
    • 한국표면공학회지
    • /
    • 제27권3호
    • /
    • pp.143-148
    • /
    • 1994
  • Effects of process variables of HCD ion plating on the film composition of Ti(C, N) were analyzed. The mole ratio of carbon to nitrogen and that of non-metal to titanium in the film primarily depend on the partial pressure ratio of ($C-2H_2$/ $N_2$) and total reactive gas pressure, respectively. The amount of nonmetallic com-ponents increases in nonlinear fashion as the total gas pressure due to the different reactivity of $C-2H_2$ and $N_2$ gases with Ti. The nonmetallic components was saturated dwith nitrogen when the nitrogen gas was more than 60% of total reactive gas. These two process variables could be related systematically using the concept of effective pressure in which the difference of reactivity of each gas was normalized.

  • PDF

Characterization of Basic Nitrogen-Containing Compounds in the Products of Lube Base Oil Processing by Electrospray Ionization Fourier Transform Ion Cyclotron Resonance Mass Spectrometry

  • Li, Xiaohui;Zhu, Jianhua;Wu, Bencheng
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권1호
    • /
    • pp.165-172
    • /
    • 2014
  • The distribution of basic nitrogen-containing compounds in three vacuum gas oils (VGOs) with different boiling ranges and their dewaxed oils from the lube base oil refining unit of a refinery were characterized by positive-ion electrospray ionization (ESI) Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). It turned out that the composition of basic nitrogen compounds in the samples varied significantly in DBE and carbon number, and the dominant basic N-containing compounds in these oil samples were N1 class species. $N_1O_1$, $N_1O_2$, and $N_2$ class species with much lower relative abundance were also identified. The composition of basic nitrogen compounds in VGOs and dewaxed VGOs were correlated with increased boiling point and varied in DBE and carbon numbers. The comparison of the analytical results between VGOs and dewaxed VGOs indicated that more basic N-containing compounds in VGO with low carbon number and small molecular weight tend to be removed by solvent refining in lube base oil processing.

살수식 여과조의 질산화작용에 대한 수리학적 부하량과 C/N 비의 영향 (Impacts of the Hydraulic Loading Rate and C/N Ratio on Nitrification in a Trickling Filter with Styrofoam Bead Media in Seawater)

  • 최태건;김병기;박정환
    • 한국수산과학회지
    • /
    • 제52권3호
    • /
    • pp.256-267
    • /
    • 2019
  • Styrofoam beads, which are relatively inexpensive and can provide a large specific surface area, were tested as filter media. Styrofoam beads with a diameter of $3{\pm}0.5mm$ were used; the specific surface area of the beads was $1,034m^2{\cdot}m^{-3}$. Five independent recirculating culture systems were used in the experiment. Each system consisted of one culture tank and three trickling bio-filters. Using the systems, nitrification efficiency was evaluated with respect to hydraulic loading rate (HLR) and carbon/nitrogen (C/N) ratio. The lowest ammonia and nitrogen concentrations were $0.84mg{\cdot}L^{-1}$ and $1.30mg{\cdot}L^{-1}$, respectively, observed at an HLR of $50.9m^3{\cdot}m^{-2}{\cdot}h^{-1}$. Nitrification efficiency in the culture tank was highest at a C/N ratio of 0, with ammonia and nitrite nitrogen concentrations of $0.32mg{\cdot}L^{-1}$ and $0.90mg{\cdot}L^{-1}$, respectively. Ammonia and nitrite nitrogen concentrations in the culture tank abruptly changed at C/N ratios ${\geq}3$.

$N-TiO_2$ 광촉매의 제조와 광촉매 활성 검토 (Preparation of $N-TiO_2$ Photocatalysts and Activity Test)

  • 강영구;신기석;안성환;함현식
    • 한국응용과학기술학회지
    • /
    • 제29권3호
    • /
    • pp.466-472
    • /
    • 2012
  • 가시광선에 감응하는 광촉매를 제조하기 위하여 $TiO_2$에 질소(N)를 도핑하여 $N-TiO_2$를 제조하였다. 제조한 광촉매의 결정성, 입자 형상 및 도핑 상태는 XRD, FE-SEM 및 XPS를 이용하여 조사하였다. 제조한 광촉매의 활성 평가는 메틸렌블루의 광분해로 조사하였다. 제조한 광촉매는 anatase type이었으며, pH가 높을수록 결정화도가 향상되었다. 제조한 광촉매의 입자 크기는 pH 2.0에서 5.42 nm, pH 4.7에서 5.99 nm, pH 9.0에서 7.58 nm로, 입자 크기는 pH가 증가 할수록 약간씩 증가하였다. 광촉매의 활성은 결정화도에 비례하였다. $TiO_2$에 N를 도핑하여 제조한 $N-TiO_2$가 가시광선 하에서도 활성을 나타냈다. $TiO_2$에 도핑한 N는 격자 속에 존재하는 것이 아니라 표면에 존재하였다.