• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2001

This paper examines the structural characteristics of fern lignins (deer fern (Blechnum spicant), sword fern (Polystichum munitum) and maidenhair fern (Adiantum pedatum)) by chemical degradation methods of thioacidolysis and nitrobenzene oxidation as well as 13C NMR. Phloroglucinol-HCI staining indicates that the lignins are specifically accumulated at the sclerenchyma cells beneath the epidermis and vascular bundles. The fern lignins consist of only guaiacyl units. Remarkably, the frequency of the -O-4 linkages is extremely low in fern lignins (only 9 to 11 %). Furthermore, the presence of lignin is ambiguous in maidenhair fern, due to very rare amount of -O-4 linkage. Biphenyl (5-5) and 1,2 bis arylpropane (-1) are main condensed dimeric substructures in fern lignins over 70%. In addition, 13C NMR analysis strongly evidenced the integration of phenolics or their derivatives into the fern lignins.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.372-380
• /
• 2009

After supercritical water treatment of poplar wood meals (passed through 60 mesh) for 60s between 325 and $425^{\circ}C$ at the fixed pressure at $220{\pm}10atm$, some solid residues were present in the degradation products. They mainly consisted of chemically modified lignin and fibrous materials. Glucose and xylose were identified as main sugar components of fibrous materials, and the highest ratio of glucose/xylose was achieved at the highest reaction temperature. As reaction temperature was elevated, the portion of fibrous materials decreased in the solid residues, while lignin was further accumulated. The H : G : S ratio of lignin in solid residues was estimated by analytical pyrolysis. Irrespective of reaction temperatures, the H:G:S ratios were not significantly changed in the lignin in solid residues. Compared to poplar milled wood lignin (MWL), it was remarkable that H type monomers were further lowered, while portion of S type monomers increased. The amount of G type monomers were relative stable. In presence of HCl catalyst, lowering H type as well as enhancing S type was further distinguishable. According to the result of nitrobenzene oxidation (NBO), ca. 265 mg of vanillin and syringaldehyde was yielded from poplar MWL as main products. However, remarkably reduced amount of NBO products were determined from solid residues by raising operating temperature as well as by the addition of HCl catalyst. These results strongly indicate that $\beta$-O-4 linkage could be easily cleaved during supercritical water treatment, so that the lignins in the solid residues seem to be condensed phenol polymers, which are mainly formed by carbon-carbon linkages rather than $\beta$-O-4 linkage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.29-35
• /
• 2004

Fiber dimensions, their derived values and chemical properties of cotton stalks (Gosypium hirsutum L), jute stick (Corchorus capsularis) and dhancha (Sesbania aculeate) have been examined to assess their suitability for paper production. Cotton stalks have a good derived values especially slender ratio, which is comparable to hardwood. The flexibility coefficient of these three non wood plants is better than hardwood. Anatomical analysis shows higher percentage of fibers and vessels than in general non wood plants. Lignin, $\alpha$-cellulose and pentosan contents in these three nonwood plants are within the range of hardwood. Neutral sugar analysis of cotton stalks, jute stick and dhancha shows that the glucose in the major sugar followed by xylose and mannose. The arabinose and galactose are present in minor amount. Alkaline nitrobenzene oxidation of cotton stalks, jute stick and dhancha wood meal exhibits that these nonwood plant lignins mainly consist of syringyl (S) and guaiacyl (V) units. The S/V ratios are 1.6, 1.2 and 2.1 for cotton stalks, jute stick and dhancha, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.3
• /
• pp.45-50
• /
• 1996

Wood chips of oak(Quercus mongolica) and larch(Larix leptolepis) were treated with low pressure steaming explosion. Main components of exploded wood were separated with hot water and methanol extraction. Crude lignin separated from those extractives were purified and those chemical characteristics were investigated. And also, lignin adhesive was prepared from crude lignin and studied those chemical characteristics. The results can be summarized as follows ; 1. The purified lignin by Bj$\ddot{o}$kman's method from crude lignin is about 30% in exploded oak wood and is about 11% in exploded larch wood as a low amount. 2. The phenolic hydroxyl groups in the purified lignins are little higher than those of MWL and molecular weight distributions of the purified lignins are some lower than that of MWL. 3. Alkaline nitrobenzene oxidation products are very low in the clude lignin but those are increased in the purified lignin 4. The gravity of lignin resins(1.15 and 1.13) are a little lower than that of phenol resin(1.16) and the compressive shearing strength of lignin resins are higher than those of phenol resin.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.215-220
• /
• 2012

ZnO nanoparticles were synthesized through a facile route and were used as ozonation catalysts. With the increase of calcination temperature ($150-300^{\circ}C$), surface hydroxyl groups and catalytic efficiency of asobtained ZnO decreased remarkably, and the ZnO obtained at $150^{\circ}C$ showed the best catalytic activity. Compared with ozonation alone, the degradation efficiency of phenol increased above 50% due to the catalysis of ZnO-150. In the reaction temperatures range from $5^{\circ}C$ to $35^{\circ}C$, ZnO nanocatalyst revealed remarkable catalytic properties, and the catalytic effect of ZnO was better at lower temperature. Through the effect of tertbutanol on degradation of phenol and the catalytic properties of ZnO on degradation of nitrobenzene, it was proposed that the degradation of phenol was ascribed to the direct oxidation by ozone molecules based on solidliquid interface reaction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.5
• /
• pp.368-372
• /
• 2004

The lignin contents between IR-29 and Pokkali were not significantly different in the absence of NaCl, but they were slightly increased at 40 mM NaCl. Although lignin contents were not relatively significantly different between salt treated and control plants, the total yields of alkaline nitrobenzene oxidation ranged from 17.4-20.0 mg/g of cell wall residue at 40 mM NaCl were significantly different compared with control plants (11.8-12.2 mg/g). The total amounts of ester-linked hydroxycin-namic acids in IR-29 were decreased from 14.5 to 9.9mg/g, while Pokkali is almost same levels (14.9-15.0 mg/g) under treated and control with 40 mM NaCl. In contrast, the total amounts of ether-linked hydroxycinnamic acids were increased from 9.4 to 13.9 mg/g together with an opposite trend in Pokkali as a decrease 10.9 to 8.8 mg/g under treated and control with 40 mM NaCl. These results revealed that IR-29 is more sensitive in response to 40 mM NaCl in terms of hydroxycinnamic acids than Pokkali.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.9-16
• /
• 2004

This research was carried out to investigate the component isolation method from liquefied waste paper. and isolated component was analyzed by molecular weight distribution with gel chromatography and nitrobenzene-oxidation analysis. In the aspect of liquefaction ratio, wet defibration fiber are better than dry defibration fiber because of wet defiberation fiber was easy to access of chemical solution. The optimal liquefaction condition of waste paper was treated at 190℃ for 60 min(cresol 2 ㎖, water 4 ㎖, phosphoric acid 0.5 ㎖ based on waste paper 1 g). In the liquefied waste paper, lignin and carbohydrate were separated with two interfacial layer(cresol layer, water layer). In the chemical analysis of isolated lignin, molecular weight distribution of isolated lignin was below 1,000.

• Clean Technology
• /
• v.19 no.4
• /
• pp.416-422
• /
• 2013

In environmental friendly aspects, the synthesis of glycerol carbonate from glycerol using carbon monoxide and oxygen gases which were produced in petrochemical plants was studied. The oxidative carbonylation of glycerol under batch reaction system was performed on parameter conditions such as effect of various metals (Cu, Pd, Fe, Sn, Zn, Cr), oxidizing agents, mole ratio of carbon monoxide to oxygen, catalyst amount, solvent types, reaction temperature and time and dehydrating agents. In particular copper chloride catalysts showed the excellent activities, and the glycerol carbonate yields over CuCl and $CuCl_2$ catalysts were the maximum of 44% and 64%, respectively at the following reaction conditions: solvent as nitrobenzene, mole ratio of 1:3:0.15 (glycerol:carbon monoxide:catalyst), mole ratio of 2:1 (carbon monoxide:oxygen), the total pressure of 30 bar at 413 K for 4 hr. It was found that reactivity were significantly different depending on the oxidation number of Cu catalysts, and oxygen plays an important role as oxidizing agents in producing H2O during oxidation reaction after carbonylation of glycerol.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.109-116
• /
• 1977

Much attention has been paid to the fact that quite a few herbicides such as phenylcarbamates, phenylureas, and acylanilides form azo compounds known as carcinogens by virtue of the microoranisms in soil. In consequence, many investigators synthesized. TCAB, an azo compound, starting from 3,4-dichloronitrobenzene for the related studies. However, the authors were under the necessity of synthesizing $^{14}C-ring-labeled$ TCAB from $^{14}C-ring-labeled$ 3,4-DCA available, in addition to making up for the disadvantage of dechlorination in the reduction of 3,4-dichloronitrobenzene. The new method is as follows:TCAB, $^{14}C-ring-labeled$ and non-labeled, was produced by aerial oxidation of 3,4-DCA catalyzed by CuCl with pyridine as solvent at $60^{\circ}C$ for 5-12 hrs, giving 80.2% yield. The procedure forpurification was described in detail. The identities of TCAB isomers were confirmed by means of autoradiography, TLC, GLC, IR, and MS.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.808-815
• /
• 2007

Four different herbs, including rosemary, oregano, basil and sage, along with green tea were individually added to ground beef at different percentages: 0.5, 1.0, and 1.5, respectively. The sensory qualities of the five natural herbs and their antioxidant effects were evaluated using Beef-Yukwonjeon. For the sensory evaluation results, the 0.5% herb addition and the control group generally showed higher acceptability scores than the 1.0% or 1.5% herb addition groups. In particular, the Yukwonjeon made with 0.5% green tea showed higher preferences in the acceptance tests and ranking tests. However, the sensory differences among samples were reduced after 3 days of storage at $6^{\circ}C$. For the results of lipid oxidation without storage, the TBARS values of the herb addition groups were slightly lower than the value of the control group, but not significantly(p>0.05). However, the antioxidant effects of each herb showed higher values over a longer storage period as well as at the higher herb concentrations. The antioxidant effects of the herbs during 7 days' of storage at $6^{\circ}C$ were evaluated as $10.0{\sim}38.5%$ reductions in TBARS values as compared to the group without herbs. Furthermore, the antioxidant effects of the herbs during 30 days' of storage at $-20^{\circ}C$ were shown as $16.8{\sim}27.8%$ reductions in the TBARS value. The green tea showed the highest antioxidant activity against lipid oxidation, because it was acceptable at higher concentrations in the sensory evaluation. These results indicate the potential to produce better quality beef-Yukwonjeon, with herbs, especially green tea.