• Journal of Environmental Science International
• /
• v.29 no.12
• /
• pp.1205-1211
• /
• 2020

In this study, the applicability of reduction-oxidation-linked treatment was evaluated for nitrobenzene and a by-product by analyzing the reaction kinetics. Nitrobenzene showed very low reactivity to persulfate that was activated using various methods. Nitrobenzene effectively reacted through the reduction process using Zero-Valent Iron (ZVI). However, aniline, a toxic substance, was produced as a by-product. Reduction-oxidation-linked treatment is a method that can allow the oxidative degradation of aniline after reducing nitrobenzene to aniline. The experimental results show improved reactivity and complete decomposition of the by-product. Improved reactivity and decomposition of the by-product were observed even under conditions in which the reduction-oxidation reaction was induced simultaneously. No activator was injected for persulfate activation in the process of reducing oxidant linkage, and the activation reaction was induced by ferrous iron eluted from the ZVI. This indicates that this method can be implemented relatively simply.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1005-1014
• /
• 2021

Organic contaminants can be released into water environments due to chemical accidents and exist as dissolved and non-aqueous phase liquids (NAPL). Fenton oxidation was tested for bisphenol A and nitrobenzene as model organic contaminants in dissolved and NAPL states. Fenton oxidation was successfully applied for both of the dissolved and NAPL states of the two pollutants and the results indicated that a quick treatment was needed to reduce the risk from a chemical accidents instead of carrying out oxidation after the contaminants dissolve in water. A set of Fenton reactions were tested under seawater conditions because chemical accidents often occurs in the ocean. Chloride ions act as radical scavengers and inhibit Fenton oxidation. The reaction rate is inversely proportional to salt contents and the reduced reaction rate can be compensated by increasing the quantity of the oxidizing agents. The current study showes that Fenton oxidation could be applied as a quick treatments for organic contaminant in dissolved and NAPL state organic contaminants released as a result of leaks or chemical accidents.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2002

This study explored for treatment processes by investigating the treatment efficiency and reaction mechanism through oxidation reaction using UV and $O_3$ as oxidant in compensate the wastewater containing nitrobenzene that is non biodegradable organic. Also by modeling these reactions, we try to step explanation of optimum reaction rate and reaction mechanism as the development of the computer program predictable the reaction rate by modeling the reaction. By using this model, after kinetic constant for each reaction from an experimental data is made an optimization and for hardly contribute to reaction rate in reaction kinetic equation is made an ignorance and suppose the simplified reaction mechanism, examined the propriety of computer simulation model and simplified reaction mechanism by comparing and inspecting the reaction kinetic constant and masstransfer coefficient. An investigation results for destructional treatment of nitrobenzene in the wastewater as non-biddegradable organic using UV, $O_3{\;}O_2{\;}H_2O_2-UV$ as oxidant.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.3
• /
• pp.11-16
• /
• 2003

On nitrobenzene oxidation of aspen, spruce, and knauf wood meals gave rise to vanilline, syrigaldehyde, p-hydroxybenzoaldehyde, vanillic acid, and other minor oxidation products. The phenolic aldehydes (p-hydroxybenzaldehyde, vanilline, and syringaldehyde) are derived from oxidative degradation of the corresponding 4-hydroxyphenylpropane units and their ethers. The lignin content of knauf wood meals was different as the concentration of NaOH solution and cooking temperature. The lignin contents of aspen, spruce, and knauf wood meals were decreased as laccase treatment. The laccase caused C-oxidation, demethylation, cleavage in phenolic groups and C-C cleavage in syrigyl structures.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.79-86
• /
• 2005

Aspen wood (Populus tremuloides, L.) was biotreated with Ceriporiopsis subvermispora for 1, 2, 4, and 6 weeks to observe the physical/chemical modification of wood components. Milled wood lignins (MWLs) isolated from each decayed wood were analyzed by gel permeation chromatography (GPC) and nitrobenzene oxidation (NBO). As fungal treatment was progressed, lignin contents continuously decreased up to 20% after 6-week treatment. The lignin polymer could be fragmented to low-molecular phenolics, which make an enhancement of alkali solubility. Holocellulose contents were not affected severely during the period of fungal treatment, only reduction of 5~6% compared to the control. Xylose contents were decreased gradually from 23.4% to 18% after 6 weeks, whereas alpha-cellulose remained almost unchanged. Gel permeation chromatography (GPC) indicates that molecular weight of lignin undergoes a slight decrement for 4 weeks of fungal treatment. Nitrobenzene oxidation revealed that total yield of NBO products of lignins were lowered ca 20% after fungal treatment. Sum of syringaldehyde and syringic acid are remarkably decreased. However, increment of sum of vanillin and vanillic acid was surprisingly observed. These results work as indirect evidence that a specific lignolytic reaction, maybe selective demethoxylaytion of S-lignin, can occur during fungal treatment of aspen wood by C. subvermispora.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.257-263
• /
• 2006

This paper examines the physico-chemical properties and structural features of thio lignin and alcohol lignin preparations extracted from fast-growing poplar wood. The lignin preparations were characterized using UV, IR and alkaline nitrobenzene oxidation methods. The yield was higher in thiolignin due to its preparation from wood under drastic alkaline conditions and almost the total amount of alkaline degraded lignin was precipitated except acid soluble lignin. In case of ethanol lignin, structural modifications were comparatively less and form a cream colored lignin more or less similar to its original natural color. The methoxyl values were higher due to syringyl unit present in hard wood lignin in addition to guaicyl unit present in soft wood. The higher values of methoxyl content of isolated lignin revealed that it was built up of high syringyl units. The elementary analysis, methoxyl group and hydroxyl groups were presented by $C_{9}$ formula indicated that it was made up of phenyl propane monomers. Nitrobenzene oxidation of thio lignin and ethanol lignin yield more or less the chromatograms of similar pattern, except difference in relative percentage. The ultra violet spectra of lignins were quite similar, irrespective of the source and method of isolation. Infrared spectroscopy studies of poplar deltoides, thio and ethanol lignin shown different absorption bands which have been utilized for structural investigations.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.26-32
• /
• 2004

Chemical compositions and chemical structure of lignin and alkali cooking condition and fiber length of red pepper were investigated and compared to those of woods. The chemical compositions of red pepper were higher component of extraction than that of wood. The contents of carbon and hydrogen of Klason lignin in red pepper were similar to that of pine and birch wood. On the other hand, the contents of oxygen and nitrogen of Klason lignin in the red pepper were higher than that of wood. The result of nitrobenzene oxidation shows that Klason lignin of red pepper was similar to lignin of softwood. The best alkali cooking condition of red pepper was 0.2%-anthraquinone, active alkali of 20% and liquor ratio of 1:7. The fiber length of red pepper was about 0.47 mm. Therefore, the red pepper fiber will be able to use special purpose of short fiber.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.23-28
• /
• 2011

The pine wood meal was ozonated in acidic water. A 91.3% of lignin and 13% of polysaccharides in pine wood meal were degraded with 180 min ozonation. The phenolic hydroxyl groups of lignin in ozonated wood meals were increased with ozonation time. The vanillin content in nitrobenzene oxidation products of lignin is decreased with 10 min. ozonation and it was slightly increased with ozonation time. The sugar composition of ozonated wood meals showed that the hemicellulose was more susceptible to ozonation than cellulose. The crystallinity of ozonated wood meal was increased.

• Clean Technology
• /
• v.24 no.4
• /
• pp.293-300
• /
• 2018

Sulfamethoxazole (SMX) is sulfaamide-based synthetic antibiotics, which are widely prescribed pharmaceutical compound to treat bacterial infections in both human and animals. Most of them are not completely decomposed as refractory substances. The environmental impact of pharmaceuticals as emerging contaminants has generated severe concerns. In this study, catalytic wet peroxide oxidation (CWPO) of SMX was carried out with $Cu/Al_2O_3$ catalyst and investigated the optimum reaction conditions of temperature, dosage of catalyst and concentration of $H_2O_2$ to completely decompose the SMX. It was observed that SMX was completely decomposed within 20 min using 0.79 mM $H_2O_2$ and 6 g $Cu/Al_2O_3$ catalyst at 1 atm and $40^{\circ}C$, but SMX was not fully mineralized and converted to intermediates as hydroylated-SMX, sulfanilic acid, 4-aminobenzenesulfinic acid and nitrobenzene. After that these are completely mineralized through organic acid. We proposed the decomposition reaction path ways of SMX by analyzing the behavior of these intermediates. To investigate the durability of heterogeneous catalyst, decomposition of SMX was observed by continuously recycling catalysts. When the heterogeneous catalyst of 10 wt% $Cu/Al_2O_3$ was continuously reused 5 times, decomposition of SMX was a little lowered, but the activity of catalyst was overall very stable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.17-26
• /
• 2003

Nalita wood(Trema orientalis) is one of the fastest growing woods in the world. It may be a viable species for pulpwood. The physical, chemical and morphological properties of Nalita were studied. The total lignin, pentosan and holocellulose content in Nalita wood were 24.7%, 22% and 81.2%, respectively. Its fiber length was about 0.92 mm, which are comparable to Acacia mangium. Nitrobenzene oxidation of Nalita wood meal indicated that the guaciayl and syringyl unit were the major constituent of Nalita lignin. Nalita produced 50% pulp yield at Kappa number 21 in soda-anthraquinone process. The strength properties of Nalita pulp were comparable to other tropical hardwood pulp. At $40_{\circ}$ SR, the breaking length, burst index, tear index and total energy absorption were 6000 m, $3.5kPa{\cdot}m^2/g\;and\;7.0mN{\cdot}m^2/g\;and\;75J/m^2$, respectively.