• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.47-55
• /
• 2006

Recovery of acids from the waste etching solution of containing nitric, hydrofluoric and acetic acid discharged from silicon wafer manufacturing process has been attempted by using solvent extraction method. With EHA (2-Ethylhexlalcohol) for acetic acid and TBP(Tri-butly Phosphate) for nitic and hydrofluoric acid as extraction agent was carried on experiment to obtain the process design data in separation procedure. From the McCabe-Thiele diagram analysis, we obtained the optimum conditions of phase ratio(O/A) and stages to separate the each acid sequently from the mixture acids. The recovery yield was obtained 90% above for acetic acid from the acid mixtures, 90% above for nitric acid from acetic acid extraction raffinate and then 67% above for hydrofluoric acid from final extraction raffinate.

• Resources Recycling
• /
• v.25 no.5
• /
• pp.50-56
• /
• 2016

Extraction behaviour of silver from nitric acid solutions by Cyanex 301 as an extractant was examined. Detailed studies have been conducted to evaluate the effect of different variables influencing the extraction such as concentration of nitric acid and extractant, phase ratio(O/A) and synergism of mixed extractant. The extraction behaviour of associated metals namely Ca, Al, Fe, Zn and Sr has been investigated. The extraction results show that Ag can be extracted effectively by Cyanex 301 and selectively extracted from 3.0M $HNO_3$ using 5% Cyanex 301. Impurity metals loaded in organic phase can be effective scrubbed by 4.0M HCl. Finally, pure silver solution can be obtained efficiently by thiourea as a stripping reagent.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.28 no.3
• /
• pp.14-29
• /
• 2015

Objectives : The extract of Sagunja-tang has been traditionally used for restorative treatment of constitutional weakness, vascular and immune disorder, and nervous disease in Oriental country. This study investigated the regulatory effects of Sagunja-tang on the expression, production, and activity of immune mediators.Methods : In this study, the extract of Sagunja-tang was prepared by extracting with distilled water at 100$^{\circ}C$ for 2.5h. The extract was freeze-dried following filtration through 0.45${{\mu}m}$ filter. The extract was dissolved in Hank's balanced salt solution (HBSS) and filtered again through 0.45${{\mu}m}$ filter before use. The level of nitrite, an oxidative product of nitric oxide(NO) was measured in the culture medium by the Griess reaction. The levels of prostaglandin E₂(PGE₂), Th1 cytokines (IFN-${\gamma}$, IL-2) and Th2 cytokines(IL-4, IL-5, IL-13) were measured by enzyme-linked immunosorbent assay and the protein levels of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) expression were determined by Western blot analysis. Also examined the effects of the extract on T-cell proliferation and cytotoxic activity of natural killer cells.Results : In this investigation, Production levels of Th2 cytokines (IL-4, IL-5, IL-13) was inhibited in a dose dependent manner by treatment with the extract. I also found that the extract increased T-cell proliferation and cytotoxic activity of natural killer cells in a dose-dependent manner.Conculsions : These results suggest that the water extract of Sagunja-tang may be useful for a therapeutic drug against a sickly constitution and immune diseases, probably by regulating the production of immune mediators.

• Clean Technology
• /
• v.15 no.4
• /
• pp.253-257
• /
• 2009

The waste solution discharged form the LCD(Liquid Crystal Display) manufacturing process contains phosphoric acid, nitric acid, acetic acid and metal ions such Al and other impurities. In this study, vacuum evaporation and diffusion dialysis was developed to commercialize an efficient system for recovering the high-purity phosphoric acid and manufacturing monoammonium phosphate. By vacuum evaporation, almost 99% of nitric and acetic acid was removed. Also, by diffusion dialysis, about 97.5% of Al was removed. Monoammonium phosphate was manufactured from purified phosphoric acid and ammonium hydroxide. In order to get the optimum manufacturing condition, the molar ratio of ammonium hydroxide and phosphoric acid, pH and temperature was controlled. Using this optimum condition, we obtained the recovery rate of monoammonium phosphate of about 90%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.17-17
• /
• 2009

Single-walled carbon nanotubes (SWCNTs) have attracted much attention as promising materials for transparent conducting films (TCFs), thanks to their superior electrical conductivity, high mechanical strength, and complete flexibility. The CNT-based TCFs can be used in a variety of application fields as flexible, transparent electrodes, including touch panel screens, flexible electronics, transparent heaters, etc. First of all, this study investigated the effect of a variety of surfactants on the dispersion of SWCNTs in an aqueous solution. Following the optimization of the dispersion by surfactants, flexible TCFs were fabricated by spraying the CNT suspension onto poly(ethylene terephthalate) (PET) substrates. The sheet resistances of the TCFs having different surfactants were investigated with treatment in nitric acid ($HNO_3$) whose concentration and period of treatment time were varied. It seems that the $HNO_3$ removes the surfactants from and is simultaneously doped into the SWCNT network, reducing the contact resistance between CNTs. TCFs were characterized by UV-VIS spectroscopy, thermogravimetric analyzer (TGA), scanning electron microscopy (SEM), and four-point probe.

• Carbon letters
• /
• v.14 no.1
• /
• pp.34-39
• /
• 2013

Acrylonitrile (AN)-acrylamide (AM) copolymers were prepared by nitric acidic hydrolysis of homopolyacrylonitrile. The acrylamino group increased as a function of hydrolysis time, while crystallinity decreased. Differential scanning calorimetry and a thermal gravimetric analysis indicated that the acylamino introduced by acidic hydrolysis effectively enhanced the cyclization reaction at low temperature due to the change of the cyclization reaction mechanism. Char-yield of AN-AM copolymers also gradually increased with increasing hydrolysis time. The maximum char-yield was 49.48% when hydrolized at $23^{\circ}C$ in 65% nitric acid solution for 18 h, which was 30% higher than that of non-acidic hydrolysis of homopolyacrylonitrile. Simulation of the practical process also showed an increase of char yields, where the char yields were 55.43% and 62.60% for homopolyacrylonitrile and copolyacrylonitrile, respectively, with a hydrolysis time of 13 h.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.254-254
• /
• 2009

Single-walled carbon nanotubes (SWCNTs) have attracted much attention as promising materials for transparent conducting films (TCFs), thanks to their superior electrical conductivity, high mechanical strength, and complete flexibility. The CNT-based TCFs can be used in a variety of application fields as flexible, transparent electrodes, including touch panel screens, flexible electronics, transparent heaters, etc. First of all, this study investigated the effect of a variety of surfactants on the dispersion of SWCNTs in an aqueous solution. Following the optimization of the dispersion by surfactants, flexible TCFs were fabricated by spraying the CNT suspension onto poly(ethylene terephthalate) (PET) substrates. The sheet resistances of the TCFs having different surfactants were investigated with treatment in nitric acid ($HNO_3$) whose concentration and period of treatment time were varied. It seems that the $HNO_3$ removes the surfactants from and is simultaneously doped into the SWCNT network, reducing the contact resistance between CNTs. TCFs were characterized by UV-VIS spectroscopy, thermogravimetric analyzer (TGA), scanning electron microscopy (SEM), and four-point probe.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.1
• /
• pp.9-17
• /
• 2009

Activated carbon fiber (ACF) was surface modified by nitric acid to improve the adsorption efficiency of the propylamine. Functional groups and textural properties of modified ACF were investigated. The total surface acidity increased about 7 times to that of as-received ACF by modification with 1 M nitric acid solution, carboxylic and phenolic groups mainly increased. However, the specific surface areas and the total pore volumes of the modified ACFs were decreased by 5-8% due to the increased blocking (or demolition) of micropores in the presence of newly introduced complexes. Despite the decrease of textural properties, it was found that the amount of propylamine adsorbed by the modified ACFs was increased by approximately 17%. The oxygen and nitrogen contents on the modified ACF increased by 1.5 and 3 times compared with the as-received ACF. From the XPS results, it was observed that propylamine reacted with strong or weak acidic groups, such as -COOH or -OH on the ACF surfaces, resulting in the formation of pyrrolic-, pyridonic- or pyridine-like structures.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1386-1391
• /
• 2009

Crude polysaccharides from rapeseed meal (PRM) were extracted with 0.3% NaOH aqueous solution, followed by further purifications and 2 fractions, namely PRM1 and PRM2, were separated with a DEAE-cellulose DE-52 column. Their primary compositions were analysed and antioxidant activity was determined, including scavenging activity toward superoxide anion radicals, hydroxyl radicals, and nitric oxide radicals, reducing power, and inhibitory effects against the microsomal lipid peroxidation, compared to that of L-ascorbic acid. The results indicated that PRM1 and PRM2 exhibited not only good reducing power and inhibitory effects on the microsomal lipid peroxidation, but also strong scavenging activity toward superoxide anion radicals, nitric oxide radicals, and hydroxyl radicals. In addition, positive correlations were also observed between the superoxide anion radical scavenging activity and the protein contents of the polysaccharides, and the reducing power and the sulfate contents. These findings thus clearly suggest the polysaccharides possess direct and potent antioxidant activity.