• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.269-279
• /
• 1984

The optimum conditions for measuring cadmium content of less than 0.2ppm by flame atomic absorption spectrophotometry were investigated. The cadmium in urine was extracted by APDC-MIBK for the analysis by atomic absorption spectrophotometry after ashing them by a wet method. 1. Optimum conditions by APDC-MIBK and DDTC-MIBK extractions. The acidic aqueous solution was prepared with appropriate amount of 0.IN nitric acid, 5ml of 25% (W/V) sodium potasstum tartarate, 10ml of saturated ammonium sulfate, and 2ml of 2% APDC(or 1 ml of 5% DDTC) chelating agent. The total volume of solution was adjusted to 55 ml and pH to $2{\sim}10$ (or$7{\sim}10$). The aqueous solution was extracted with 10ml MIBK. Concentration of Triton X-100 did not effect the absorbance for APDC-MIBK extraction of cadmium, but absorbance decreased as the concentration increased for DDTC-MIBK extraction. The sensitivity and detection limits for the cadmium determination from APDC-MIBK extraction were 0.0038ppm and 0.0102, 0.0022ppm and 0.0116 for DDTC-MIBK, and 0.0132ppm and 0.0034 for 0.1N nitric acid. APDC-MIBK and DDTC-MIBK extractions were 3 times higher than 0.1N nitric acid for the sensitivity. 2. Excretion of cadmium in 24-hour urine by APDC-MIBK extraction. Determination of cadmium in urine by atomic absorption spectrophotometry of A.A. (Cd=2 mA) mode and B.C. (Cd=4 mA) mode and B.C. (Cd=4mA, $D_2=20mA$) mode showed some difference (p<0.05). The difference of cadmium determination and recovery according to method of standard additions and standard calibration curve method in urine was not significant (p>0.05, $93.48{\pm}11.78%,\;94.83{\pm}22.00%$). Excretion of cadmium in 24-hour urine collection from normal person and variance analysis within measurement variation was not significant (p>0.05), but between interindividual was significant (0.05). Determination of cadmium content by two different methods of flame atomic absorption spectrophotometry and dithizone colorimetry showed that the results from the two methods can be described by a regression line with a good correlation (y=1.0153x-0.2927, x=Cd by D.C., y=Cd by A.A.S., $r=0.8651^*$, p<0.01).

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.707-714
• /
• 1996

Extraction behaviour of Np with DEHPA(di-(2-ethyhexyl)Phosphoric acid) from the low nitric acid solution(below 1M $HNO_3$) containing $H_2O_2$ as a reducing agent was studied at a batch system in order to establish the conditions of extraction and stripping and to enhance the extraction rate. As results, it was confirmed that the Np was mainly the pentavalent oxidation state in the low nitric acid solution. The extraction yield of Np was increased with increasing the concentration of DEHPA and $H_2O_2$ and decreased more rapidly with the increase of $HNO_3$ concentration. It was also found that the Np could be extracted into DEHPA even without the addiction any redox agents, although the extraction yield is rather low as about 70%. The extraction rate was proportional to the 0.516 power of $H_2O_2$ concentration and inversely proportional to 0.483 power of $HNO_3$ concentration as follows. $d[Np(V)]/dt=-1.391{\times}10^{-2}[H_2O_2]^{0.516}[HNO_3]^{-0.483}[Np(V)]$ Regardless of the $H_2O_2$, the Np extracted in the organic phase was effectively stripped to the aqueous phase with $H_2C_2O_4$. The Np could be stripped more than 92 % with 0.5M $H_2C_2O_4$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1252-1254
• /
• 2005

Recently, PDP barrier ribs require the formation of complex structure so that they are usually formed by etching method. For producing the fine ribs structure, during the etching process the metal ions of matrix (glass) of barrier materials should be understood on the etching mechanism with etching condition. We analyzed the quantity of Pb, Si, and B ions from the etch solution as a function of etching time.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.171-172
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1557-1561
• /
• 2006

The use of chemically modified silica-salen$(NEt_2)_2$ was studied for the separation and concentration of the metal ions from an aqueous solution by a solid phase extraction. After the salen(NEt2)2 was synthesized, it was chemically bonded to silica gel by a diazonium coupling reaction. The adsorption capacities and binding constants were obtained with respect to Cu(II), Mn(II), Pb(II) and Zn(II) by a graphical method. Some experimental conditions were optimized for the determination of the trace elements. After the silica-salen(NEt2)2 was pulverized in a sample solution of which the pH was adjusted, the solution was stirred to pre-concentrate the metal ions. The metal ions adsorbed were desorbed with nitric acid solution. And the concentrated analytes were determined by a flame AAS. The method proposed here was so rarely influenced by a sample matrix that the procedure was applied to 3 types of water samples. The reproducible results of less than 10% RSD were obtained at the concentration level of ca. 100 ng/mL and the recoveries of 95-109% were obtained in the spiked samples in which given amounts of analytes were added.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.339-342
• /
• 1998

Ferroelectric L $a_2$ $Ti_2$ $O_{7}$(LTO) thin films were prepared by chemical solution deposition processes. Acetylacetone was used as chelating agent and nitric acid was added in the stock solution to control hydrolysis and condensation reaction rate. The LTO thin films were spin-coated on Pt/Ti/ $SiO_2$/(100)Si and Pt/Zr $O_2$/ $SiO_2$/(100)Si substrates. After multiple coating, dried thin films were heat-treated for decomposition of residual organics and crystallization. The role of acetylacetone in Ti iso-propoxide stabilization by possibly substituting $O^{i}$Pr ligand was studied by H-NMR. B site-rich impurity phase, i.e. L $a_4$ $Ti_{9}$ $O_{24}$, was found after annealing, where its appearance was dependent on process temperature indicating the possible reaction with substrate. Dielectric and other relevant electrical properties were measured and the results were compared between modified sol-gel and MOD processes.s.s.

• Resources Recycling
• /
• v.20 no.6
• /
• pp.56-62
• /
• 2011

Zirconium is used in nuclear reactors as a structural material due to its excellent corrosion resistance and to low neutron crosssection. Variation in the distribution and solubility of Zr(IV) with solution pH was obtained. Distribution of Zr(IV) containing species in HCl and $HNO_3$ solution was analyzed by considering the complex formation of Zr(IV) species with the anion of the inorganic acid. Bromley interaction parameter between $ZrO^{2+}$ and nitrate ion was estimated by using the reported data on the solvent extraction of Zr(IV) by Cyanex272 from $HNO_3$ solution. This Bromley parameter can be utilized in calculating extraction isotherm of Zr(IV) and in predicting the separation factor between Zr(IV) and Hf(IV).

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• Journal of the Korean Chemical Society
• /
• v.42 no.2
• /
• pp.172-176
• /
• 1998

An anion exchange resin which has Alizarin Red S (ARS) as functional group was prepared by batch method. The resin is stable in acidic solutions below 0.5 M hydrochloric acid, nitric acid and sulfuric acid and adsorption capacity of Fe(Ⅱ) ion on the resin was larger than other metal ions. The preconcentration and the separation of Fe(Ⅱ) ion from the mixture solution were carried out with the pH 4.5 buffer solution and 0.1 M $HNO_{3}$ as eluents.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.38-41
• /
• 1963

Nb is one of the trouble-some fission products in the reprocessing of nuclear fuels. In this paper, the extraction of Nb from 1, 2, 3, 4, 6 and 9N $HNO_3$ solution by mixtures of TBP and DBP in dodecane are reported. Sums of the concentration of TBP and DBP are kept to 20%. When the concentrations of DBP are lower the $2{\times}10^{-2}%$, distribution ratios are almost same, and ratios increase abruptly and the slope is about 2.5 at between $2{\times}10^{-2}$ to $4{\times}10^{-1}%$, then slope falls down to about 0.5. There is aging effect on mixture of TBP and DBP.