• Carbon letters
• /
• v.6 no.1
• /
• pp.31-40
• /
• 2005

The carbon nanofibers (CNFs) were synthesized through the catalytic decomposition of hydrocarbons in a quartz tube reactor. The CNFs prepared from $C_3H_8$ at $550^{\circ}C$ was selected as the purification sample due to the higher content of impurity than that prepared from other conditions. In this study, we carried out the purification of CNFs by oxidation in air or carbon dioxide after acid treatment, and investigated the influence of purification parameters such as kind of acid, concentration, oxidation time, and oxidation temperature on the structure of CNFs. The metal catalysts could be easily eliminated from the prepared CNFs by liquid phase purification with various acids and it was verified by ICP analysis, in which, for example, Ni content decreased from 2.51% to 0.18% with 8% nitric acid. However, the particulate carbon and heterogeneous fibers were not removed from the prepared CNFs by thermal oxidation in air and carbon dioxide. This result can be explained by that the direction of graphene sheet in CNFs is vertical to the fiber axis and the CNFs are oxidized at about the similar rate with the impurity carbon.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.27-36
• /
• 1983

This study was performed to get the basic information on nitric acid pulping of beech wood. In order to reduce the consumption of nitric acid, alkali pretreated woods were applied to a nitric acid pulping process. It consisted of nitric acid treatment to a high residual lignin content and the subsequent delignification with alkali, required far less chemical than the single stage method. At the first stage of nitric pulping, pulp yield descreased with increasing cooking time and 3 percent of nitric acid was more effective on the delignification of wood than 1 or 2 percent. Alkali pretreatment of wood improved significantly the rate of delignification, and 79 percent of the pretreated yield was good enough for excellent delignification. The dissolution of carbohydrate (mainly xylose) was increased with increasing cooking time, especially at the second stage. It would be considered that carbonyl groups introduced to polysaccharides in wood by nitric acid oxidation caused the degradation of carbohydrates.

• Korean Journal of Materials Research
• /
• v.17 no.5
• /
• pp.244-249
• /
• 2007

The properties of anodized films on aluminum 6061 alloy in single electrolyte of sulfuric acid and mixed electrolyte of sulfuric-boric acid and sulfuric-boric-nitric acid have been studied. Polarization tests in NaC solution were used to investigate the corrosion performance. Characteristics of film formation and surface morphology were examined by optical microscopy, FE-SEM and EDS. The results obtained have indicated that oxide films growth have been promoted by nitric acid and anodized films in mixed electrolyte have superior corrosion resistance. In case of anodic films formed in mixed electrolyte, some grooves and numerous crazings were also observed at the surface.

• YAKHAK HOEJI
• /
• v.42 no.6
• /
• pp.583-588
• /
• 1998

These experiments were investigated effects of the cell death of glycyrrhetinic acid (GA) on transplanted-L1210 cells in BALB/c mice. The GA suppressed the proliferation of L121 0 cells in vivo and in vitro system. The administration of GA induced apoptosis of transplanted-L1210 cells via the reduction of mitochondrial transmembrane potential in mice. The GA enhanced the production of nitric oxidation in peritoneal macrophages obtained from L1210 cells-transplanted mice. The apoptosis of L1210 cells were induced by co-culture of the macrophages obtained from GA administered mice and L1210 cells in vitro, and was partly inhibited by the treatment of L-NMMA. These results suggest that GA induces the cytotoxicity and the apoptosis of transplanted-L1210 cells via the production of nitric oxide in peritoneal macrophages.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.1
• /
• pp.6-11
• /
• 2018

The anodic oxidation behavior of Si-containing aluminum alloy for diecasting was investigated. Especially, the property changes during anodization both on aluminum 1050 and 9 weight percentage silicon containing aluminum (Al-9Si) alloys were analyzed by the static current test. In order to fabricate a uniform anodic oxidation film by effect of Al-Si compound, nitric acid containing hydrofluoric acid had been used as a desmutter for aluminum alloy after alkaline etching. It was found that the level of voltage of Al-9Si alloy during the static current test was almost as double as higher than aluminum 1050 through anodization. By adding hydrofluoric acid in the nitric acid electrolyte, the silicon compound on the surface was removed, and the optimum amount of added hydrofluoric acid could be derived. It was also observed that the size of silicon compound formed on the surface could be refined by heat treatment at $500^{\circ}C$ and followed water quenching.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.369-372
• /
• 2009

In the present study, the effect of chemical treatment on graphite nanofibers (GNFs) supports with various concentrated nitric acids was investigated for methanol oxidation. To optimize the electrocatalytic activity, PtRu catalysts were deposited on GNF supports by impregnation method. The surface and structural properties of the GNF supports were characterized by X-ray photoelectron spectroscopy (XPS), element analyzer (EA), and X-ray diffraction (XRD). The morphology of the catalysts was observed by means of transmission electron microscopy (TEM). The electrocatalytic activity of PtRu/GNF catalysts was investigated by cyclic voltammetry measurement. As a result, the oxygen functional groups were introduced on the GNF supports and were gradually increased with increasing of concentrated nitric acid, causing the smaller particle size and higher loading level. And the electrocatalytic activity of the catalysts for methanol oxidation was gradually improved. Consequently, it was found that chemical treatments could influence on surface properties of the carbon supports, resulting in enhancing the electrocatalytic activity of the catalysts for DMFCs.

• Korean Journal of Acupuncture
• /
• v.25 no.4
• /
• pp.89-104
• /
• 2008

Objectives : This study was undertaken to determine the in vitro antioxidant activity of the extract of Chilgitang herb-acupuncture solution (CHAS). Methods : The radical scavenging capacity was tested by 2,2-diphenyl-1-picryl-hydrazyl (DPPH), hypoxanthine-xanthine oxidase system, DCFH-DA assay, nitric oxide and peroxynitrite generating system. In addition, antioxidant activity on copper and AAPH mediated human low-density lipoprotein (LDL) oxidation was measured by using TBARS assay and relative electrophoretic mobility assay. The amount of total phenolic compounds was assayed by the Folin-Ciocalteu method. Results : CHAS revealed a potent scavenging activity on DPPH radical(82%), superoxide anions(73%), hydroxyl radical(63%), nitric oxide (99%) and peroxynitrite (99%). Moreover, CHAS showed a strong inhibitory effect (59%) on $FeCl_2$-ascorbic acid induced lipid peroxidation of rat liver homogenate. CHAS also markedly inhibited copper(81%) and AAPH(56%)-mediated LDL oxidation, and effectively suppressed the electrophoretic mobility during exposure of human LDL to copper ions. CHAS (82 mg/g) contained higher concentration of total phenolic compounds than that of water extract (45 mg/g) obtained from Chilgitang. Conclusions : These results indicate that CHAS may protect against ROS- or RNS involved diseases, including cardiovascular diseases.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2034-2040
• /
• 2020

The gas evolution from mixtures consisting of 0.2 M solution of N,N,N',N'-tetra-n-octyldiglycolamide (TODGA) in n-alcohol (n-decanol or n-nonanol) with Isopar-M diluent was investigated during thermal oxidation. The effect of ionizing radiation on their thermal stability has been studied. It has been determined that the volume of gaseous thermolysis products increases by 260% in the case of n-nonanol and 80% in the case of n-decanol compared to non-irradiated solutions. It has been shown that the gas evolution rate and gas volume increase when the irradiated mixture saturated with nitric acid is heated. However, there are no prerequisites for the development of autocatalytic oxidation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.248-249
• /
• 2014

Photocatalytic cement is receiving attention due to its high oxidation power that oxidizes nitrogen oxides (NOx), thus contributing to clean atmospheric environment. However, there has not been a thorough investigation on durability of a parent material, cementitious material, as a result of photocatalytic reactions. In this study, durability of photocatalytic cementitious materials exposed to nitrogen dioxide (NO₂) gas was examined. Titanium dioxide (TiO₂) nanoparticles containing cement paste samples were exposed to cycles of NO₂ with UV light, followed by wetting and drying to simulate environmental condition. The surface of samples was characterized mechanically, chemically, and visually during the cycling. The results indicate that the photocatalytic efficiency decreased with continued NO₂ oxidation due to calcium carbonate formation. The pits found from SEM demonstrate that chemical deterioration have occurred, such as acid attack or leaching. In conclusion, the photocatalytic reactions and its product could alter cementitious materials chemically and mechanically which could further affect long-term durability.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.774-781
• /
• 2011

Nitric acid and hydrofluoric acid are used for acid pickling in zirconium alloy tubing manufacturing process. Nitrate and fluoride in the wastewater were treated by chemical coagulation and SOD (Sulfur Oxidation Denitrification) process. This study is investigated the effect of fluoride concentration and the optimal condition for SOD process. The limited fluoride concentration for SOD process was below 20 mg F-/L. The adjusted pH and alkalinity by NaOH and $NaHCO_3$ was shown to be more effective for removal of nitrate compared with using NaOH. Furthermore, the microbial activator mixed trace elements and ingredient for alkalinity did not only supplement with alkalinity but also enhance the growth and proliferation for sulfur-oxidizing bacteria. As a result, the inorganic industrial wastewater was successfully treated by the microbial activator in SOD process without continuous addition of seed sludge. Finally, SOD process was shown to remove nitrate in industrial wastewater and to contribute the microbial activator for activation of sulfur-oxidizing bacteria.