• 한국재료학회지
• /
• 제14권7호
• /
• pp.451-456
• /
• 2004

Thermal creep properties of the zirconium tube which was developed for high burnup application were evaluated. The creep test of cladding tubes after various final heat treatment was carried out by the internal pressurization method in the temperature range from $350^{\circ}C to 400^{\circ}C$ and from 100 to 150 MPa in the hoop stress. Creep tests were lasted up to 900days, which showed the steady-state secondary creep rate. The creep resistance of zirconium claddings was higher than that of Zircaloy-4. Factors that affect creep resistance, such as final annealing temperature, applied stress and alloying element were discussed. Tin as an alloying element was more effective than niobium due to solute hardening effect of tin. In case of advanced claddings, the optimization of final heat treatment temperature as well as alloying element causes a great influence on the improvement of creep resistance.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 추계학술발표회요약집
• /
• pp.226-226
• /
• 1998

• 자원환경지질
• /
• 제45권6호
• /
• pp.709-719
• /
• 2012

콩고민주공화국 동부에 발달하는 주석광화대 중에서 카탕가 주에 위치하는 무완자와 콩골로 지역을 대상으로 광상탐사를 실시하였다. 카탕가 주에 발달하는 대부분의 광상은 주로 화강암류와 연관되며, 북동-남서 방향의 중기원생대의 키바란대 내에 위치한다. 키바란대에 위치하는 변성퇴적암류는 다양한 화성암에 의해 관입을 받았으며, 그중 tin granite(970 Ma)와 연관되어 주석, 니오비움, 탄탈륨 등의 광상이 발달한다. 무완자와 콩골로 지역 광상은 주로 tin granite와 관련된 페그마타이트, 석영맥 또는 그라이젠 부분에 석석, 콜탄, 금 등이 발달하며, 상기 광석을 대상으로 소규모 채광이 이뤄지고 있다. 또한 식생 등의 영향으로 광화대 확인을 위한 노두가 거의 노출되어 있지 않은 지역에서는, 채굴중인 충적층 및 하천퇴적물을 대상으로 조사를 수행하였다. 향후 상기 시료에 대한 화학분석 결과를 바탕으로 잠재 광화대 지역을 선정하여 정밀탐사를 수행할 예정이다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.10-20
• /
• 2016

The Cable-In-Conduit-Conductor (CICC) for the ITER tokamak Central Solenoid (CS) has undergone design change since the first prototype conductor sample was tested in 2010. After tests showed that the performance of initial conductor samples degraded rapidly without stabilization, an alternate design with shorter sub-cable twist pitches was tested and discovered to satisfy performance requirements, namely that the minimum current sharing temperature ($T_{cs}$) remained above a given limit under DC bias. With consistent successful performance of ITER CS conductor CICC samples using the alternate design, an attempt is made here to revisit the internal electromagnetic properties of the CICC cable design to identify any correlation with conductor performance. Results of this study suggest that there may be a simple link between the $Nb_3Sn$ CICC internal self-field and its $T_{cs}$ performance. The study also suggests that an optimization process should exist that can further improve the performance of $Nb_3Sn$ based CICC.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.188-194
• /
• 1999

2원계 (Zr-xNb, Zr-xSnl 와 3원계 (Zr-O.8Sn-xNb, Zr-O.4Nb-xSnl Zr합금의 기계적 특성에 미치는 Nb와 Sn의 영향올 조사하기 위하여 인장시험 빛 마세조직 분석을 실시하였다. Nb와 Sn량이 많이 첨가될수록 2원계와 3원계 합금의 강도는 정진적으로 증가하는 경향을 보이는데, Nb와 Sn이 고용도 이상으로 첨가될 때 강도중가는 더욱 두드러진 것으로 냐타났다. 강도 증가현상을 고용강화, 석출강화, 결정립 미세화에 의한 강화, 집합조직에 의한 강화효과 관정에서 분석한 결과, 고용강화 효과가 가장 두드러지며 Nb와 Sn이 고용도 이상에서는 석출강화가 강도에 기여하는 것으로 냐타났다. 합금원소 첨가에 따른 결정립미세화도 강도에 약간은 영향을 미치는 것으로 사료된다. 그러나 집합조직은 합금원소 변화에 따라서 거의 변화가 없는 것으로 냐타났으므로 집합조직은 강도증가에 기여하지 않는 것으로 생각된다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권4호
• /
• pp.31-39
• /
• 2017

European R&D on designing their version of a DEMO fusion tokamak has recently resulted in the testing of a prototype $Nb_3Sn$ Cable-in-Conduit Conductor (CICC) for the DEMO TF coil. The characteristics and reported results of low temperature performance tests with the prototype CICC sample are compared with those from CICC samples incorporating other recent $Nb_3Sn$ cable designs. The EU-DEMO TF CICC prototype shows performance characteristics similar to that of the ITER CS CICC with short twist pitch. This is a first for a CICC sample that does not have a circular cross section. Assessment of its internal magnetostatic self-field suggests that a reduction in the internal self-field due to the rectangular geometry of the EU-DEMO TF CICC prototype compared to one with a circular geometry may have contributed to the performance characteristics showing current sharing temperature ($T_{cs}$) initially increase then stabilize with repeated electromagnetic loading, similarly to ITER CS CICC results. However, constraints on the internal self-field are not a sufficient condition for this $T_{cs}$ characteristic to occur.

• 열처리공학회지
• /
• 제13권4호
• /
• pp.239-245
• /
• 2000

Effect of tin and iron content on the recrystallization behavior of temary Zr-0.8Sn-x%Nb alloys were studied. The specimens with 0.1, 0.2 and 0.4 wt.% of iron were prepared under various annealing temperatures from $400^{\circ}C$ to $800^{\circ}C$ and times from 30 to 5000 minutes after vacuum arc remelting. The recrystallization behavior was observed using a polarized optical microscope, TEM and micro-vickers hardness tester. The recrystallization temperature of the alloys slightly increased with iron content due to increase of activation energy. The grain growth of the alloys with 0.1 and 0.2 wt.% of iron occured rapidly, however, that of the alloys with 0.4 wt.% iron was gradually retarded due to precipitation. The hardness of the alloy with a high iron slightly increased by the precipitation of beta phase after annealing at $800^{\circ}C$.