• 한국결정성장학회지
• /
• 제31권1호
• /
• pp.16-23
• /
• 2021

리튬이차전지 제조 공정 중 발생한 폐액으로부터 회수된 탄산리튬의 경우, 이차전지 양극재의 원료인 코발트, 니켈 및 망간의 중금속이 함유되어 있다. 본 연구에서는 탄산리튬의 재결정화를 통하여 순도 98.28 %의 저급 탄산리튬 분말에 함유된 중금속을 제거하고 탄산리튬의 순도를 높이고자 하였다. 먼저 염산 수용액을 이용하여 탄산리튬의 침출 효율을 살펴보았으며, pH 5 조건으로 침출 후 탄산나트륨의 당량 및 농도의 탄산리튬 재결정에 대한 영향을 확인하였다. 리튬의 함량 기준 대비 탄산나트륨 1 당량에서 1.5로 증가할수록, 농도 1.4 M에서 2.8 M로 증가할수록 회수율은 향상되었으며, 탄산나트륨의 투입 조건이 달라짐에 따라 결정 형상이 달라지는 것을 SEM 분석을 통해 확인할 수 있었다. 재결정된 탄산리튬 분말은 수세하여 순도 99.9 % 이상의 고순도 탄산리튬을 회수할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.497-503
• /
• 2022

Spinel ferrites (Ni_xFe_3-xO₄; x = 0.25, 0.5, 0.75 and 1.0) have been prepared at 550℃ by egg white auto-combustion route using egg white at 550℃ and characterized by physicochemical (TGA, IR, XRD, and SEM) and electrochemical (CV and Tafel polarization) techniques. The presence of characteristic vibration peaks in FT-IR and reflection planes in XRD spectra confirmed the formation of spinel ferrites. The prepared oxides were transformed into oxide film on glassy carbon electrodes by coating oxide powder ink using the nafion solution and investigated their electrocatalytic performance for OER in an alkaline solution. The cyclic voltammograms of the oxide electrode did not show any redox peaks in oxygen overpotential regions. The iR-free Tafel polarization curves exhibited two Tafel slopes (b₁ = 59-90 mV decade^-1 and b₂ = 92-124 mV decade^-1) in lower and higher over potential regions, respectively. Ni-substitution in oxide matrix significantly improved the electrocatalytic activity for oxygen evolution reaction. Based on the current density for OER, the 0.75 mol Ni-substituted oxide electrode was found to be the most active electrode among the prepared oxides and showed the highest value of apparent current density (~9 mA cm^-2 at 0.85 V) and lowest Tafel slope (59 mV decade^-1). The OER on oxide electrodes occurred via the formation of chemisorbed intermediate on the active sites of the oxide electrode and follow the second-order mechanism.

• 대한본초학회지
• /
• 제33권6호
• /
• pp.87-92
• /
• 2018

Objectives: The aim of the study was to analyze the constituents of Pyrolusitum, which was used to eliminate static blood and inflammation, to establish the basis of clinical application. Methods: Qualitative analysis was performed by X-Ray Diffraction (XRD) using the sample as a powder, and the elemental content of granular sample was measured by X-Ray Fluorescence (XRF). 1 M hydrochloric acid and 5% sodium hydroxide aqueous solution were added to observe the changing shape, respectively. Results: Qualitative analysis by XRD revealed that the Pyrolusitum samples used in the study contained quarts and kaolinite. Quantitative analysis by XRF revealed that the manganese content in the samples used in the study was 6.16% on average, while iron was contained the highest amount of 22.99%. The minor constituents include 1.08% of titanium, 0.30% of barium, 0.18% of lead, 0.06% of zirconium, 0.05% of chromium, 0.04% of zinc, 0.03% of cadnium, 0.02% of nickel, 0.01% of arsenic, 0.01% of copper, 0.01% of rubidium, 0.01% of strontium, 0.00% of molybdenum, respectively. And cobalt, which is reported to be a constituent of Pyrolusitum, was not detected at all in the samples of the study. Pyrolusitum was dissolved in dark brown when it was put into 1 M hydrochlorid acid, and there was brown precipitate when sodium hydroxide solution was added to Pyrolusitum and stirred. Conclusions: It was found that manganese and iron were the major constituents of Pyrolusitum, and it could be identified by using concentrated hydrochloric acid and sodium hydroxide solution.

• 대한치과기공학회지
• /
• 제31권2호
• /
• pp.45-52
• /
• 2009

Esthetic restorations have been widely used in dental practice, although many studies have focused on the development and improvement of all ceramic restorations. The success of esthetic restorations depends primarily on an optimal bond strength between various veneered ceramics and core materials for esthetic restorations. The purpose of this study was to compare the shear bond strength between various veneered ceramics and core materials for esthetic restorations. 30 metal cores and 20 zirconia cores were fabricated and divided into five groups according to veneered ceramic materials such as Creation porcelain powder, Cercon Ceram Kiss, and IPS e.max ZirPress. Thirty spacimens were prepared using Creation porcelain powder, veneered 3mm height and 3mm in diameter, over the metal cores (n=10). Twenty specimens were prepared using Cercon Ceram Kiss and Zirpress, veneered 3mm height and 3mm in diameter, over the zirconia cores (n=10). The shear bond strength test was performed in a universal testing machine with a crosshead speed of 1mm/min. Ultimate shear bond strength data were analyzed with One-way ANOVA and the Scheffe's test (p=.05). Within the limits of this study, the following conclusions were drawn: The mean shear bond strengths (MPa) were: 18.44 for Uni metal VH/Creation (NCUC); 18.72 for Heraenium/Creation (NCHC); 16.23 for Wirobond C/Creation (NCWC); 13.88 for Zirconia core/$110{\mu}m$ $Al_2O_3$ sandblasting/Cercon Ceram Kiss (ZS110P); 14.61 for Zirconia core/No surface treatment/IPS e.max ZirPress (ZNTH). The mean shear bond strength for NCUC (Uni metal VH/Creation), NCHC (Heraenium/Creation) and NCWC (Wirobond C/Creation) were significantly superior to ZS110P (Zirconia core/$110{\mu}m$ $Al_2O_3$ sandblasting/Cercon Ceram Kiss) and ZNTH(Zirconia core/No surface treatment/IPS e.max ZirPress) (p<0.05).

• 한국분말재료학회지
• /
• 제29권5호
• /
• pp.411-417
• /
• 2022

Environmental issues such as global warming due to fossil fuel use are now major worldwide concerns, and interest in renewable and clean energy is growing. Of the various types of renewable energy, green hydrogen energy has recently attracted attention because of its eco-friendly and high-energy density. Electrochemical water splitting is considered a pollution-free means of producing clean hydrogen and oxygen and in large quantities. The development of non-noble electrocatalysts with low cost and high performance in water splitting has also attracted considerable attention. In this study, we successfully synthesized a NiCo₂O₄/NF electrode for an oxygen evolution reaction in alkaline water splitting using a hydrothermal method, which was followed by post-heat treatment. The effects of heat treatment on the electrochemical performance of the electrodes were evaluated under different heat-treatment conditions. The optimized NCO/NF-300 electrode showed an overpotential of 416 mV at a high current density of 50 mA/cm² and a low Tafel slope (49.06 mV dec^-1). It also showed excellent stability (due to the large surface area) and the lowest charge transfer resistance (12.59 Ω). The results suggested that our noble-metal free electrodes have great potential for use in developing alkaline electrolysis systems.

• 자원리싸이클링
• /
• 제32권1호
• /
• pp.21-32
• /
• 2023

리튬이온 배터리(LIB) 제조를 위한 리튬의 사용이 점차 증가함에 따라 그에 따라 발생되는 리튬이온배터리 폐기가 증가될 것으로 사료된다. 이에 따라 폐배터리를 재활용을 하기위한 용매 추출을 통한 재활용에 대한 활발한 연구가 니켈, 코발트 및 망간과 같은 유가금속을 제거한 후 얻은 폐 용액에서 리튬의 회수가 중요하다. 본 연구에서는 폐이차전지 재활용공정 후 발생되는 폐액에서 리튬을 회수하기위해 추출제 Di-(2-ethylhexyl) hosphoricacid(D2EHPA)와 등유의 개질제 Tri-n-butyphosphate(TBP)를 선택적으로 혼합하여 추출조건을 최적화하였다. 폐액에는 리튬과 고농도의 나트륨(Li⁺ = 0.5% ~ 1%, Na⁺ = 3 ~ 6.5%)을 함유하고 있었으며, 리튬의 추출은 유기용매의 다른 구성에서 최종적으로 20% D2EHPA + 20% TBP + 60% 등유로 구성된 유기용매에서 효과적인 추출을 조건을 확립하였다. NaOH의 비누화를 이용한 SX 시스템에서는 평형 pH 4~4.5에서 유기 대 수성(O/A)이 5일 때 약 95% 이상의 리튬이 선택적으로 추출되는 것을 확인하였다. 적은 양의 나트륨으로 염화리튬에서 탄산리튬 분말을 얻기 위해 고순도 중탄산암모늄을 처리하였다. 최종적으로 처리된 탄산리튬에 여러번 세수를 통하여 미량의 나트륨을 제거하고 고순도 탄산리튬 분말(순도 99.2%)을 제조하였다. 따라서 본 연구를 통하여 폐이차전지 재활용공정에서 발생되는 폐액을 활용하여 탄산리튬의 효율적인 제조방법을 확인하였다.

• 공업화학
• /
• 제8권5호
• /
• pp.742-748
• /
• 1997

초경공구(WC-Co)의 성능 향상을 목적으로 고경도, 높은 열전도도의 특성 등을 가진 다이아몬드 막을 코팅하고 있으나 WC-Co 기판표면의 특성상 문제점으로 인하여 코팅의 어려움이 있다. 이 문제의 해결을 위하여 WC-Co기판위에 중간층을 도입한 후 다이아몬드 막을 증착시키는 새로운 방법을 고려하였으며 중간층의 제조에 무전해 Ni-P도금법을 사용하였다. 무전해도금을 위한 WC-Co기판의 전처리, 무전해도금 및 열처리, 다이아몬드 막 증착의 공정에 대하여 조사하였다. 형성되는 계면의 구조와 성분, 계면간의 밀착력 등을 Scratch Tester, Roughness Tester, SEM/EDS, XRD, Raman Spectroscopy를 사용하여 분석하였다. 무전해도금의 전처리로서 산에 의한 방법과 다이아몬드 분말에 의한 방법을 사용하였으며 두 경우에 모두 WC-Co기판의 표면조도의 감소, 표면 Co성분의 감소, 그리고 밀착력 저하가 관찰되었다. 무전해도금층의 열처리시 영향을 조사하였으며 온도 증가에 따라 Ni 결정이 형성되며 이로 인하여 도금의 밀착력이 증가되며 Ni 결정이 성장함을 관찰하였다. 또한 열처리된 Ni-P도금 위에서 다이아몬드막 증착 실험을 실시하였으며 증착온도를 증가시킴에 따라 다이아몬드 형성이 증가되어 $800^{\circ}C$일때 양호한 다이아몬드 막을 얻을 수 있었다. 본 연구의 방법 및 실험조건은 WC-Co를 비롯하여 다이아몬드 막 형성이 어려운 소재들의 코팅에 효과적으로 이용될 수 있다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.93-108
• /
• 2013

This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.

• 전기화학회지
• /
• 제12권2호
• /
• pp.189-195
• /
• 2009

고순도의 $\beta-Ga_{2}O_{3}$ 나노로드(nanorods)가 니켈산화물 나노입자를 촉매로 사용하고 갈륨금속분말을 원료물질로 이용하여 화학기상증착법으로 합성되었다. 전계방출형 주사전자현미경을 이용하여 $\beta-Ga_{2}O_{3}$ 나노로드를 관찰한 결과, 평균직경은 약 160 nm 그리고 평균길이는 $4{\mu}m$였으며 vaporsolid(VS) 성장기구를 통하여 성장되었음을 알 수 있었다. X-선 회절시험과 고분해능 투과전자 현미경을 이용한 결정구조 분석 결과, 합성된 나노로드의 내부는 단사정계 결정구조를 가지는 단결정의 $\beta-Ga_{2}O_{3}$로 이루어져 있고 외벽은 비정질 갈륨옥사이드로 이루어진 코어-셀 구조로 구성되어 있는 것을 확인하였다. 합성된 $\beta-Ga_{2}O_{3}$ 나노로드를 음극 활물질로 사용하여 전극을 제조하고 전기화학적 특성을 분석한 결과, 리튬/$\beta-Ga_{2}O_{3}$ 나노로드 전지는 첫 방전 시 867 mAh/g-$\beta-Ga_{2}O_{3}$의 높은 용량을 나타내었으나 초기 비가역 용량으로 인해 62%의 낮은 충 방전 효율을 나타내었다. 그러나 5 사이클 이후 높은 충 방전 효율을 보이며 30 사이클까지 안정된 사이클 특성을 나타내었다.

• 한국환경농학회지
• /
• 제3권1호
• /
• pp.36-44
• /
• 1984

낙동강(洛東江) 류역중(流域中) 8개(個) 지점(地點)에서 1982년(年) 8월(月)부터 1983년(年) 6월(月)까지 2개월(個月) 간격으로 채취(菜取)한 수질(水質) 48점(點), 저이토(底泥土) 48점(點) 및 붕어 29점(點)에 대하여 유기린계(有機燐系) 기류농약(幾留農藥)을 FPD부착(附着) GLC로 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 수질(水質), 저이토(底泥土) 석시(析時) 원소황(元素黃)의 간사(干沙)은 copper powder 또는 raney nickel로 제거(除去)하였다. 2) 낙동강(洛東江) 환경시료(環境試料)중 수질(水質)과 붕어에서 유기린계(有機燐系) 잔유농약(殘留農藥)이 검출(檢出)되었으나 저니토(底泥土)에서는 검출(檢出)되지 않았다. 3) 농약(農藥) 성수기(盛需期)인 8월(月)에 채취(採取)한 수질(水質)과 붕어시료(試料)에서는 IBP, diazinon, phenthoate, parathion, malathion 및 fenitrothion 등(等) 6종(種)의 유기린계(有機燐系) 농약(農藥)이 검출(檢出)되었다. 4) 수질(水質) 및 붕어중(中) 유기린계(有機燐系) 농약(農藥)의 잔유량(殘留量)은 계절적(季節的) 변이(變異)가 인정되었으며, 수질(水質) 및 붕어중(中) diazinon과 IBP의 천유량(淺留量)이 가장 많았고, phenthoate, parathion, malathion 및 fenitrothion은 검출빈도(檢出頻度) 및 잔유수준(殘留水準)이 낮았다.