• Composites Research
• /
• 제20권5호
• /
• pp.43-48
• /
• 2007

전자기파의 흡수와 간섭 문제는 상업적, 군사적 용도에서 중요한 문제로 다루어져 왔다. 스텔스 기술은 전자기파 흡수 기술의 가장 전형적인 적용 방법 중에 하나이다. 본 연구는 유전성 및 자성 손실을 함유한 복합성의 필러를 개발하고자 시작되었다. 전도성 나노 소재인 탄소나노섬유 (CNFs)에 자성을 부여하기 위해 두 가지의 니켈-인과 니켈-철을 무전해 도금을 적용하여 각각 코팅하는 실험에 성공하였다. 제작된 복합 소재의 미세 구조를 SEM/TEM을 통해 관찰하였고, 이들의 성분 분석(EDS/ELLS)을 수행하였다. 코팅 층의 평균 두께는 약 $50\;{\sim}\;100\;nm$의 결과를 나타내었으며, 코팅 층의 성분은 Ni-6wt%P와 Ni-70wt%Fe의 결과를 각각 나타내었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.110-114
• /
• 2011

Polymeric films of high chemical stability and mechanical strength covered with a thin metallic film have been extensively used in various fields as electric and electronic materials. In this study, we have chosen polypropylene (PP) as the polymer due to its outstanding chemical resistance and good creep resistance. We coated thin nickel film on PP films by the electroless plating process. The surfaces of PP films were pre-treated and modified to increase the adhesion strength of metal layer on PP films, prior to the plating process, by an environment-friendly process with atmospheric plasma generated using dielectric barrier discharges in air. The surface morphologies of the PP films were observed before and after the surface modification process using a scanning electron microscope (SEM). The static contact angles were measured with deionized water droplets. The cross-sectional images of the PP films coated with thin metal film were taken with SEM to see the combined state between metallic and PP films. The adhesion strength of the metallic thin films on the PP films was confirmed by the thermal shock test and the cross-cutting and peel test. In conclusion, we made a composite material of metallic and polymeric films of high adhesion strength.

• 한국표면공학회지
• /
• 제23권3호
• /
• pp.173-182
• /
• 1990

In order to prevent the thermal and enviromenatal degradation of contact materials a nickel layer was plated as an undercoat of gold plating on the surface phosphorous bronze. The thickness of nikel and gold coating and chemical resistance of the coatings were measured at various conditions. Variation of morphology and chemical composition was studied by SEM, EDS and ESCA, respectively. Nickel layer was found to act as a thermal diffusion barrier and to retard the diffusion of copper from substrate to gold coating in the temperature $200^{\circ}C$~$400^{\circ}C$. below $200^{\circ}C$gold coated contacts showed a stable and low contanct resistance, while above $200^{\circ}C$ rapid diffusion of copper formed copper oxide on the surface layer and raised the contact resistance. With the nickel thinkness of abount 5$\mu$m as an undercoat the gold thinkness of $0.5\mu$m, showed satistactory (less than 1 m$\Omega$) contact resistance below 20$0^{\circ}C$ and corresponding gold thinkness increased to 1.0 m at $300^{\circ}C$~$400^{\circ}C$.

• 한국표면공학회지
• /
• 제38권6호
• /
• pp.212-215
• /
• 2005

Novel continuous electroforming process equipped with a rotating patterned mandrel, soluble/insoluble anode and multiple stage of rolling wheels was proposed to produce precision nickel mesh, which is known as a very efficient electromagnetic interference (EMI) shielding material. Continuously electroformed nickel deposits showed a tendency to form small-sized particles as the plating solution temperature increased and mandrel rotation speeded up and the applied current density decreased. Along the honeycomb patterns of mandrel, nickel was accurately electrodeposited on the surface of rotating mandrel, but quite different visual/structural characteristics were measured on both sides.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.40-48
• /
• 2004

Hardness and internal stress are very important in nickel electroforming. Nickel sulfamate bath has been widely used in electroforming because of its low internal stress and moderate hardness. Nickel sulfamate bath without chloride was chosen to investigated the effect of plating variable such as temperature, PH, current density and sodium naphthalene trisulfonate as addition agent on the hardness and internal stress. It was found that hardness increased with increasing temperature and decreasing current density and ranged from 150∼310 DPH. The hardness was highest at $55^{\circ}C$ and 10∼40 mA/$\textrm{cm}^2$. The internal stress increased with increasing current density and decreasing temperature. It was minimum at PH 3.0∼3.8. Low internal stress within $\pm$1,500 psi was obtained at both $50^{\circ}C$ and $55^{\circ}C$ in 10-20 mA/$\textrm{cm}^2$. The addition of sodium naphthalene trisulfonate was found to be effective in refine columnar grains thus resulted in decreasing internal stress, increasing hardness and improving brightness.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.123-132
• /
• 1995

While a nickel mesh and an expanded nickel sheet are used as current collectors for supporting active anode materials in rechargeable batteries, a porous nickel substrate is studied extensively for its 3-dimensional structure which has high capabilities for active materials and current collection. Optimum plating conditions were studied by polarization measurement. Scanning Electron Microscopy (SEM) showed that both electroless-and electro-plated nickel on an urethane substrate were highly porous and consisted of nearly spherical pores. The diameter and the channel size of the pores were found to be 300~500 $\mu\textrm{m}$ and 50~200$\mu\textrm{m}$, respectively. The shape of skeleton resembled a triangular prism with length extending about 50~100 $\mu\textrm{m}$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.90-91
• /
• 1999

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1998년도 춘계학술발표회 초록집
• /
• pp.82-82
• /
• 1998

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 춘계학술발표회 초록집
• /
• pp.71-71
• /
• 2003

• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.493-502
• /
• 1997

본 연구에서는 치과용 니켈-크롬합금의 표면에 전처리없이 치과용 브라켓을 Super-bond로 접착한 대조군과 샌드블라스팅 및 tin-plating을 각각 혹은 병용으로 표면처리후 Super-bond로 접착한 실험각군의 인장접착강도, 브라켓 탈락양상 및 주사전자현미경 소견을 비교하여 임상적용 가능성을 알아보고자 하였으며 다음과 같은 결과를 얻었다. 1. 인장장접착강도는 니켈-크롬합금의 표면에 샌드블라스팅 처리후 Super-bond로 브라켓을 접착한 실험 I군이 $14.41{\pm}2.24MPa$로 가장 높았고, tin-plating처리후 Super-bond로 접착한 실험 III군이 $13.59{\pm}1.51MPa$, 샌드블라스팅후 tin-lating처리를 하고 Super-bond로 접착한 실험 II군이 $12.27{\pm}1.45MPa$, 특정한 표면처리 없이 Super-bond로 접착한 대조군이 $10.50{\pm}1.57MPa$로 가장 낮게 나타났으나 실험 I군과 실험 III군간, 실험 III군과 실험 II군간, 실험 II군과 대조군간에는 유의한 차이가 없었다(p>0.05). 2. 브라켓의 주된 탈락양상은 대조군의 경우 $70\%$가 브라켓과 접착제 계면에서 adhesive failure를, $30\%$가 니켈-크롬합금과 접착제 계면에서 adhesive failure를 나타내었고, 실험 각군은 모두 브라켓과 접착제 계면에서 adhesivefailure 를 나타내었다. 3. 주사전자현미경 소견에서 대조군의 경우 일부 레진이 브라켓 기저면에 부착되어 나타났으나 실험 각군에서는 거의 대부분의 레진이 니켈-크롬합금면에 부착되어 관찰되었고, 샌드블라스팅만 시행한 시편면이 가장 균일하고 조밀한 표면 요철상을 나타내었다.