• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.47-57
• /
• 2008

Recently, energy-efficient NAND Flash memory of large volume is favored as next-generation storage for sensor nodes. So far, most sensor node file systems are based on NOR flash and few file systems are applicable to large NAND flash memory. Although it is required to develop new file systems taking account of the features of NAND flash memory, it is difficult to develop them mainly due to the limit of SRAM memory on sensor nodes. Sensor nodes support SRAM of $4{\sim}10$ KBytes only. In this paper, we designed and implemented a novel file system to support data-centric applications. To do this, we added EEPROM of 1 KBytes to store persistent file description data efficiently and devised a simple wear-leveling method. This reduces the number of page updates, resulting in reduction in energy use and increase in lifetime of sensor nodes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.82-90
• /
• 2013

An Optical Network-on-Chip(ONoC) based on silicon photonics is one of promising technology for next generation exascale computing architectures. Recent active researches on ONoC focus on improving bandwidth further and avoiding path collisions by using wavelength division multiplexing (WDM). However, the number of wavelengths used for the WDM increases linearly as the number of Processing Element (PE) increases in existing ONoCs which adopt centralized routing architecture. The problem will also arises growing cost of optical devices such as light switches and light sources and limits the scalability of ONoC due to the sinal loss caused by interference of distinct light sources. In this paper, we proposes a distributed routing architecture for ONoC which is based on 2D-mesh structure using WDM technique and present a method that minimize the required number of wavelengths exploiting the connectivity of communication. In comparison with existing centralized routing architectures, results show reduction by 56% of the number of wavelengths and 21% of the number of optical switches in $8{\times}8$ networks.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1680-1688
• /
• 2004

The information indicating device plays an important part in the information times. Recently, the classical CRT (Cathod Ray Tube) display is getting transferred to the LCD (Liquid Crystal Display) one which is a kind of the FPDs (Flat Panel Displays). The OLED (Organic Light Emitting Diodes) display of the FPDs has many advantages for the low power consumption, the luminescence in itself, the light weight, the thin thickness, the wide view angle, the fast response and so on as compared with the LCD one. The OLED has lately attracted considerable attention as the next generation device for the information indicators. And also it has already been applied for the outside panel of a mobile phone, and its demand will be gradually increased in the various fields. It is manufactured by the vapor deposition method in the vacuum state, and the uniformity of thin film on the substrate depends on the temperature distribution in the point-cell source. This paper describes the basic concepts that are obtained to design the point-cell source using the computational temperature analysis. The grids are generated using the module of AUTOHEXA in the ICEM CFD program and the temperature distributions are numerically obtained using the STAR-CD program. The temperature profiles are calculated for four cases, i.e., the charge rate for the source in the crucible, the ratio of diameter to height of the crucible, the ratio of interval to height of the heating bands, and the geometry modification for the basic crucible. As a result, the blowout phenomenon can be shown when the charge rate for the source increases. The temperature variation in the radial direction is decreased as the ratio of diameter to height is decreased and it is suggested that the thin film thickness can be uniformed. In case of using one heating band, the blowout can be shown as the higher temperature distribution in the center part of the source, and the clogging can appear in the top end of the crucible in the lower temperature. The phenomena of both the blowout and the clogging in the modified crucible with the nozzle-diffuser can be prevented because the temperature in the upper part of the crucible is higher than that of other parts and the temperature variation in the radial direction becomes small.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.1
• /
• pp.1-7
• /
• 1992

For a long-term preservation of silkworm stocks by frozen gonad storage, fundamental topics such as freezing rate and transplanting stage of the gonad, proper cryoprotectant, and super-cooling temperature and freezing point of the freezing medium were examined and following results were obtained. Proper method to anesthetize the ovary-recipient silkworm was to dip the animal to cold water for 10 minutes, and the ovary taken from the 4th instar larvae was more suitable for freezing-preservation than that from the 5th. Concerning the cryoprotectant, glycerol and DMSO were effective to prevent cryoinjury of the ovary, but sorbitol was not. The supercooling temperature and freezing point of the medium to freeze the ovary and testes were checked, and consulting with the results desirable cooling rate was confirmed. On the desirable conditions of transplanting methods, freezing rate and cryoprotectant concentration ect., the next generation was obtained when the females implanted frozen-thawed ovaries mated with normal males, but none of the normal females mated with the males implanted frozen-thawed testes laid fertilized eggs. Now it is needed to improve the connecting ration of the ducts associated with the transplanted testis to those of the hosts.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.372-378
• /
• 2017

For comparison of the transcription profiles in apple (Malus domestica L.) cultivars differing in flesh color expression, two cDNA libraries were constructed. Differences in gene expression between red flesh apple cultivar, 'Redfield' and white flesh apple cultivar, 'Granny Smith' were investigated by next-generation sequencing (NGS). Expressed sequence tag (EST) of clones from the red flesh apple cultivar and white flesh apple cultivar were selected for nucleotide sequence determination and homology searches. High resolution melting (HRM) technique measures temperature induced strand separation of short PCR amplicons, and is able to detect variation as small as one base difference between red flesh apple cultivars and white flesh apple cultivars. We applied high resolution melting (HRM) analysis to discover single nucleotide polymorphisms (SNP) based on the predicted SNP information derived from the apple EST database. All 103 pairs of SNPs were discriminated, and the HRM profiles of amplicons were established. Putative SNPs were screened from the apple EST contigs by HRM analysis displayed specific difference between 10 red flesh apple cultivars and 11 white flesh apple cultivars. In this study, we report an efficient method to develop SNP markers from an EST database with HRM analysis in apple. These SNP markers could be useful for apple marker assisted breeding and provide a good reference for relevant research on molecular mechanisms of color variation in apple cultivars.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.75-82
• /
• 2018

Forward osmosis (FO) desalination system has been highlighted to improve the energy efficiency and drive down the carbon footprint of current reverse osmosis (RO) desalination technology. To improve the trade-off between water flux and salt rejection of thin film composite (TFC) desalination membrane, thin film nanocomposite membranes (TFN), in which nanomaterials as a filler are embeded within a polymeric matrix, are being explored to tailor the separation performance and add new functionality to membranes for water purification applications. The objective of this article is to develop a graphene nanocomposite membrane with high performance of water selective permeability (high water flux, high salt rejection, and low reverse solute diffusion) as a next-generation FO desalination membrane. For advances in fabrication of graphene oxide (GO) membranes, layer-by-layer (LBL) technique was used to control the desirable structure, alignment, and chemical functionality that can lead to ultrahigh-permeability membranes due to highly selective transport of water molecules. In this study, the GO nanocomposite membrane fabricated by LBL dip coating method showed high water flux ($J_w/{\Delta}{\pi}=2.51LMH/bar$), water selectivity ($J_w/J_s=8.3L/g$), and salt rejection (99.5%) as well as high stability in aqueous solution and under FO operation condition.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1226-1232
• /
• 2004

Biometric authentication is rising technology for the security market of the next generation. But most of biometric systems are developed using only one of various biological features. Recently, there is a vigorous research for the standardization of various biometric systems. In this paper, we propose a web-based authentication system using three other verifiers based on functional, parametric, and structural approaches for one biometrics of handwritten signature, which is conformable to a specification of BioAPI introduced by BioAPI Consortium for a standardization of biometric technology. This system is developed with a client-server structure, and clients and servers consist of three layers according to the BioAPI structure. The proposed neb-based multiple authentication system of one biometrics can be used to highly increase confidence degree of authentication without additional several biological measurements, although rejection rate is a little increased. That is, the false accept rate(FAR) decreases on the scale of about 1:40,000, although false reject rate(FRR) increases about 2.7 times in the case of combining above three signature verifiers. So the proposed approach can be used as an effective identification method on the internet of an open network. Also, it can be easily extended to a security system using multimodal biometrics.

• Journal of KIISE:Software and Applications
• /
• v.28 no.9
• /
• pp.669-680
• /
• 2001

Genetic Algorithms are optimization algorithm that mimics biological evolution to solve optimization problems. Genetic algorithms provide an alternative to traditional optimization techniques by using directed random searches to locate optimal solutions in complex fitness landscapes. Hybrid genetic algorithm that is combined with local search called learning can sustain the balance between exploration and exploitation. The genetic traits that each individual in the population learns through evolution are transferred back to the next generation, and when this learning is combined with genetic algorithm we can expect the improvement of the search speed. This paper proposes a genetic algorithm based Cellular Learning with accelerated learning capability for function optimization. Proposed Cellular Learning strategy is based on periodic and convergent behaviors in cellular automata, and on the theory of transmitting to offspring the knowledge and experience that organisms acquire in their lifetime. We compared the search efficiency of Cellular Learning strategy with those of Lamarckian and Baldwin Effect in hybrid genetic algorithm. We showed that the local improvement by cellular learning could enhance the global performance higher by evaluating their performance through the experiment of various test bed functions and also showed that proposed learning strategy could find out the better global optima than conventional method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.251-257
• /
• 2011

This paper deals with the statistical properties of parameters B and q in the creep crack growth rate (CCGR) law, da/dt=B$(C^*)^q$, in Mod. 9Cr-1Mo (ASME Gr.91) steel which is considered a candidate materials for fabricating next generation nuclear reactors. The CCGR data were obtained by creep crack growth (CCG) tests performed on 1/2-inch compact tension (CT) specimens under an applied load of 5000N at a temperature of $600^{\circ}C$. The CCG behavior was analyzed statistically using the empirical equation between CCGR, da/dt and the creep fracture mechanics parameter, $C^*$. The B and q values were determined for each specimen by the least-squares fitting method. The probability distribution functions for B and q were investigated using normal, log-normal, and Weibull distributions. As far as this study is considered, it can be appeared that B and q followed the log-normal and Weibull distributions. Moreover, a strong positive linear correlation was found between B and q.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.334-334
• /
• 2013

In the past decade, the infrared detectors based on intersubband transition in quantum dots (QDs) have attracted much attention due to lower dark currents and increased lifetimes, which are in turn due a three-dimensional confinement and a reduction of scattering, respectively. In parallel, focal plane array development for infrared imaging has proceeded from the first to third generations (linear arrays, 2D arrays for staring systems, and large format with enhanced capabilities, respectively). For a step further towards the next generation of FPAs, it is envisioned that a two-dimensional metal hole array (2D-MHA) structures will improve the FPA structure by enhancing the coupling to photodetectors via local field engineering, and will enable wavelength filtering. In regard to the improved performance at certain wavelengths, it is worth pointing out the structural difference between previous 2D-MHA integrated front-illuminated single pixel devices and back-illuminated devices. Apart from the pixel linear dimension, it is a distinct difference that there is a metal cladding (composed of a number of metals for ohmic contact and the read-out integrated circuit hybridization) in the FPA between the heavily doped gallium arsenide used as the contact layer and the ROIC; on the contrary, the front-illuminated single pixel device consists of two heavily doped contact layers separated by the QD-absorber on a semi-infinite GaAs substrate. This paper is focused on analyzing the impact of a two dimensional metal hole array structure integrated to the back-illuminated quantum dots-in-a-well (DWELL) infrared photodetectors. The metal hole array consisting of subwavelength-circular holes penetrating gold layer (2DAu-CHA) provides the enhanced responsivity of DWELL infrared photodetector at certain wavelengths. The performance of 2D-Au-CHA is investigated by calculating the absorption of active layer in the DWELL structure using a finite integration technique. Simulation results show the enhanced electric fields (thereby increasing the absorption in the active layer) resulting from a surface plasmon, a guided mode, and Fabry-Perot resonances. Simulation method accomplished in this paper provides a generalized approach to optimize the design of any type of couplers integrated to infrared photodetectors.