• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.75-81
• /
• 2009

The cellular system in the next generation decreases the range of transmission of a signal as well as increases the rate of transmission adapting the method of multi-hop relaying with the relay. However, the fact of decreasing the range of transmission with the method of multi-hop relaying means increasing interferential amount in the outer cell; therefore, the deployment of the relay can affect to the function of the cellular system. In this thesis, the deployment of the relay is determined for the maximum rate of transmission, based on the transmission power of the relay and the variation of interferential amount. The condition to determine the deployment of the relay is analyzed with the mathematical model; in addition, its performance is verified through the result of a simulation. Based on the analysis of this thesis, the established deployment and transmission power of the relay to minimize the average outage probability exist. Furthermore, the relay contributes to enlargement of capacity of cells, decreasing the average outage probability in the situation of less severe interference between cells with reuse of frequency. However, the relay should be restrained in use in the situation of severe interference between cells due to the fact that the outage probability of inter-cells can be increased.

• Journal of KIISE
• /
• v.43 no.5
• /
• pp.524-530
• /
• 2016

The desire to access data faster and the growth of next-generation memories such as non-volatile memories, contribute to the development of research on memory file systems. It is recommended that memory mapped file I/O, which has less overhead than read-write I/O, is utilized in a high-performance memory file system. Memory mapped file I/O, however, brings a page table overhead, which becomes one of the big overheads that needs to be resolved in the entire file I/O performance. We find that same overheads occur unnecessarily, because a page table of a file is removed whenever a file is opened after being closed. To remove the duplicated overhead, we propose the mapping cache, a technique that does not delete a page table of a file but saves the page table to be reused when the mapping of the file is released. We demonstrate that mapping cache improves the performance of traditional file I/O by 2.8x and web server performance by 12%.

• Journal of Information Technology Applications and Management
• /
• v.17 no.4
• /
• pp.157-180
• /
• 2010

The IT services industry is considered as the leading industry of the ubiquitous age that raises a nation's overall productivity and efficiency. Therefore, it is receiving increasing attention as the industry that can bring about economic takeoff and successful overseas market entrance for the next generation. In order to achieve successful development, the industry should be competitive and armed with strategies that well demonstrate the characteristics of IT services. Therefore, it is important to explore the competitive factors of the industry for its qualitative development from the perspectives of IT services industry policies and as well as IT services companies. This study categorized IT services into three types-system integration, IT consulting, and IT outsourcing- and then examined the competitive factors of each service type and their relationships with financial and non-financial performances. In conclusion, the current competitiveness of domestic IT services industry is attributed to institutions environment rather than its competitive advantages in technology, quality, know-how, and highly qualified human resources. In order to facilitate the sound growth of the IT industry and seek reasonable market competition, the environment that puts its priority on the improvement of institutions environment and the ability to carry out a project needs to be established. In all, this study can be utilized as an important knowledge for the establishment of polices to foster IT services industry and of strategies that raise competitiveness to maximize the performances of companies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.983-988
• /
• 2016

Internet of Things Iranian people and things, things and things are connected through the Cloud. It can significantly save energy through a combination of LED lighting as a new ICT technologies and industry-to provide a human-centric, eco-friendly, and the content is embedded multifunction solutions that meet your needs, environment, implementation time according to user requirements, technology It can be systematized as converged next-generation lighting. In this paper, we have developed regarding whether the building in relation to the LED lighting control system using smart devices and Cloud-based user as a human connection through the board to the Arduino Yun lit LED lighting, wireless smart device or to the Cloud or off. After the Arduino Yun is connected to the Internet, taking the current date and time information from the Linux shell command used the way coming across the bridge (BRIDGE) its value.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.8
• /
• pp.12-20
• /
• 1998

All-optical networks(AON) are emerging as the next generation broadband networks for wide-area and local-area networks. Many optical switch architectures are currently proposed to realize AON. Specially, optical switches using WDM have a lot of advantages in point of the optical transparency and network topology for B-ISDN services in AON. In this paper, two kinds of Knockout Optical Switching Architectures(KOSA) are proposed for high speed optical ATM networks. We use WDM technologies for them to operate in all-optical area and they are called Architecture-Ⅰ, Architecture-Ⅱ respectively. Each one represents different characteristics according to the number of components and the kind of components, which make KOSA have different performance and system complextity. In order to verify and to compare the performance, these architectures were analyzed and simulated in terms of cell loss ratio, system complexity and buffering speed.

• Journal of KIISE:Software and Applications
• /
• v.32 no.12
• /
• pp.1178-1191
• /
• 2005

In this paper, we propose a synthesis method of software fault tree from software requirements specification written in NuSCR formal specification language. The software fault tree, proposed in this paper, reflects requirements on both structure and behavior and it is an integrated form. The software fault tree can be used for analyzing safety in the view of structure and behavior. We propose templates for each components in NuSCR specification language and a synthesis method of software fault tree using the templates. The research was applied into the main trip logic of the reactor protection system of ARP1400, the Korean next generation nuclear reactor system, developed by KNICS. And we evaluate feasibility of our approach through this case study.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.63-70
• /
• 2016

To increase throughput efficiency and improve performance, FTN(Faster Than Nyquist) method and LDPC(Low Density Parity Code) codes are employed in DVB-S3 system. In this paper, we proposed efficient turbo equalization model to minimize inter symbol interference induced by FTN transmission. This paper introduces two conventional scheme employing SIC(Successive Interference Cancellation) and BCJR equalizer. Then, we proposed new scheme to resolve problems in this two conventional scheme. To make performance improved in turbo equalization model, the outputs of LDPC and BCJR equalizer are iteratively exchange probabilistic information. In fed LDPC outputs as extrinsic informa tion of BCJR equalizer. we split LDPC output to separate bit probabilities. We compare performance of proposed scheme to that of conventional methods through using simulation in AWGN(Additive White Gaussian Noise) channel. We confirmed that performance was improved compared to conventional methods as increasing throughput parameters of FTN.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.94-98
• /
• 2013

A report of security problems and simultaneous operation limits of Standard tone currently used for FTS introduces the development of a next generation FTS. In this paper, BER performance by modulations and channel coding methods for EFTS are compared. Simulation results show that coherent modulations have better BER performance than noncoherent modulations. However the environments of a lunching vehicle may cause serious problems in achieving and maintaining synchronization and the increasing complexity of coherent systems also increases reliability problems. Therefore noncoherent systems are suitable for FTS even though BER performace of noncoherent systems is lower than coherent systems. Noncoherent DPSK has better BER performance than noncoherent CPFSK. However the PEP of noncoherent DPSK is 0.8dB higher than noncoherent CPFSK. Therefore a transmitter of noncoherent DPSK has more output power than noncoherent CPFSK. Convoltional code has better BER performance than RS code. However RS code has a tendency of steeply decreasing BER near the wanted $E_b/N_0$.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.7-14
• /
• 2015

Storage Class Memory(SCM) has been considered as a next-generation storage device because it has positive advantages to be used both as a memory and storage. However, there are significant problems of data consistency in recently proposed file systems for SCM such as insufficient data consistency or excessive data consistency-control overhead. This paper proposes a novel data consistency-control scheme, which changes the write mode for log data depending on the modified data ratio in a block, using a rollback-recovery scheme instead of the Write Ahead Logging (WAL) scheme. The proposed scheme reduces the log data size and the synchronization cost for data consistency. In order to evaluate the proposed scheme, we implemented our scheme on a Linux 3.10.2-based system and measured its performance. The experimental results show that our scheme enhances the write throughput by 9 times on average when compared to the legacy data consistency control scheme.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.633-637
• /
• 2013

By using geolocation and maps, we need to trace the path of ourselves, others, or the objects. Until now, we used a native apps development mehod to develop path tracking systems in mobile devices such as smart phones and tablet computers. A disadvantage of this method is that we have to work again to provide the same service on different platforms. Web Apps and Hybrid Apps are developed to recover this disadvantage. Since Hybrid Apps look like Native Apps apparently, users prefer Hybrid Apps to Web Apps. In this paper, we develop a hybrid app which can trace the path on mobile devices. The recently suggested next generation markup language, HTML5, has geolocation features. By using them, we implemented a hybrid app for a path tracking system. First, we create a web app using HTML5, CSS, and JavaScript, Then, PhoneGap, a mobile development framework, is used to convert it to the hybrid app. By implementing hybrid app, various apps which need path tracking can be developed rapidly and effectively, regardless of the mobile devices.