• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.469-477
• /
• 2015

In this paper, joint spatial division and reuse (JSDR) scheme is proposed for maximizing network throughput in densely-deployed wireless local area networks equipped with massive antenna array. The proposed JSDR scheme divides the massive spatial space into two subspaces: one is for suppressing the interference from the neighboring access points and another is for sensing the carrier sensing and transmitting the information-bearing signals to intended stations. By using computer simulation, the proposed JSDR can provide 133% higher network throughput, compared to the carrier sensing technique defined in the IEEE 802.11 standard so that the proposed JSDR is suitable for the next generation WLAN systems.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.74-82
• /
• 2007

IPv6 is the internet protocol for next generation which can solve the problem of IPv4 protocol. Mobile IPv6 efficiently provides the mobility for mobile devices holding the properties of IPv6. iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard Ethernet switch and router for this kind of access, it can not only be applized to Ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the IPv6 iSCSI initiator driver which was originally designed for wired networks. Also, this paper describes about the implementation and performance analysis of mobile education service system using virtual storage devices in IPv6 wireless networks.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.101-106
• /
• 2005

In this paper, performance evaluation of mobile access layer for multiple-input multiple-output (MIMO) MultiCarrier(MC)/CDMA 16 QAM system is considered to mitigate multiple access interference and enhance system channel capacity in Rayleigh wireless fading channel. Traditionally, multi-path is viewed as an undesirable feature of wireless communications. Therefore, diversity and adaptive array schemes are proposed to mitigate its effects. Recently, to increase the spectrum efficiency and the link reliability, MIMO schemes is devised to exploit multi-path in a scattering wireless channel. In particular, the channel capacity of MIMO-MC/CDMA 16 QAM system is evaluated according to Eb/No, Mc, p. From the results, in order to improve the channel capacity, the signals at various elements must be uncorrelated. And if the paths are correlated due to inappropriate spacing or mutual coupling effects, the channel capacity of MIMO-MC/CDMA 16 QAM system becomes substantially smaller.

• Journal of Digital Contents Society
• /
• v.6 no.3
• /
• pp.137-142
• /
• 2005

CDMA scheme has received a great deal of attenttion as a multiple-access method for future mobile networks. Its main advantage: are higher radio capacity and the capacity of flexible data tranmission. And CDMA scheme is a key technology in the proposals submitted to the ITU on next generation multimedia system with integrated services, namely real-time voice services and non real-time data services. In this paper, capacity evaluation of multiple-input multiple-output(MIMO) Multi-Carrier(MC)/CDMA system is considered to mitigate multiple access interference, partial-band interference and enhance system channel capacity in wireless channel. Recently, to increase the spectrum efficiency and the link reliability, MIMO-MC/CDMA scheme is devised to exploit multi-path in a scattering wireless channel. In particular, the channel capacity of MIMO-MC/CDMA system is evaluated according to Eb/No. Mc, p and B. From the results, in order to inappropriate spacing and the signals are frequency overlapped by partial band interference, the channel capacity of MIMO-MC/CDMA system becomes substantially smaller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.17-25
• /
• 2000

ATM PON system is regarded as a solution of the next generation access network because it can cover various types of subscribers in a single platform. In this paper, we describe the merit of the ATM PON and the key protocols for its operation. Above all, the ranging is the most important protocol providing a mean of the time-division multiple access in the system. A problem in the protocol is that the window size, the time interval that ranging cell arrives, is too long. During the interval, user traffics cannot be send to the upstream, which makes the quality of service degraded. In this paper, we suggest a method to minimize the window size when the length of the optic fiber is known with some deviation. The window size can be reduced as 7 % of the conventional method when the deviation of the length is 1 Km.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.163-170
• /
• 2007

The next generation communication environment consists of various wireless access networks with distinct features that are configured as an overlay topology. In the network environments, the frequency of hand overs should be minimized and the error propagation should be solved in order to provide high-quality multimedia services to mobile users. Therefore, we propose an performance enhancement approach, based on mSCTP, that provides high quality multimedia services to mobile users by ameliorating the error propagation problem. We utilizes the following four functions: 1) the separation of transmission paths according to the types of frames. 2) retransmission strategy to minimize the loss rate of frames, 3) Foced vertical handover execution by utilizing bicasting, 4) using the stability period in order to reduce the effect of the ping pong phenomenon. The simulation results show that the proposed approach provides seamless multimedia service to mobile users by achieving error resilience.

• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.69-76
• /
• 2002

With the growth of data communication service by mobile devices, WAP is proposed to efficiently access the Internet contents by user request through wireless condition that has a high error rate and mobility. But, because a transmission speed of WAP is limited, it takes many times to transmit and to receive the data. This paper has studied the WAP packet transmission time using WTP-SAR algorithm. As a method that is to improve transfer capability of WAP, using SAR function in WTP, total message down from upper layer has been fragmented and packet is transmitted through RLP frame time slot. Then, we have analyzed the transmission time of WAP packet with variable RLP layer size on the wireless CDMA network for next generation systems. From the results, we could obtain the WAP packet transmission time and optimal WTP packet size.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.510-518
• /
• 2013

These days, interest in radio networks for railways has increased both at home and abroad. In response to this trend, not only the existing radio networks which focus on railway control signals but also the next-generation integrated radio network that can send videos and manage mass storage data are actively being investigated. This paper proposes wireless communication methods to establish integrated radio networks for railways. The paper further suggests a candidate frequency band that could be allocated as the frequency band for railways among the frequency bands currently used in Korea. Based on this paper, we can expect that the domestic railroad will operate more efficiently and that security and convenience of the railroad will reach a superior level. In addition, the Korean integrated radio networks for railways, which cope with the changes in the global technology market, will be established.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.63-72
• /
• 2007

This paper addresses the system development that can transfer data and TDM signals simultaneously by adding TDM pseudowires functions to E-PON system. E-PON technology is one of many technologies which can realize FTTH, has raised as next generation access network solution having both low-cost Ethernet technology and optical infrastructure. TDM pseudowires service is the new voice/data conversion technology which can transfer the existing TDM circuit switched voice and data over packet switching network. In this paper, this system can provide both data and TDM service without deteriorating QoS by adding TDM pseudowires service module to E-PON, and then implementing QoS control function. Therefore, the competitive system which can transfer both data and TDM signal, can be installed.