• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.50-58
• /
• 2009

Periodic variation of local paper structure was evaluated using two-dimensional fast Fourier transform (FFT) and spectral analysis. Since the periodic variation could originate from various sources and have different magnitudes and patterns depending on the origins, a complete analysis of local paper structure properties such as local grammage, local thickness, local apparent density and surface topography was proposed in this study. For a commercial copy paper, the individual periodic patterns for each local structural property were identified by using inverse FFT spectrums of the filtered spectrum. The spectral analysis of newsprint sample provided the period of variation quantitatively, which was useful in comparing the origins of the individual periodic patterns of the local structural properties.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.8-13
• /
• 1986

To investigate effect of sericite on pilot Fourdrinier paper making for loading, with respectively 15% additive sericite on talc, we made newprint with TMP, and then tested sericite on talc, we made newprint with TMP, and then tested sericite and talc abrasion, physical and strength properites of the paper. Consequently, as a loading materials, sericite had outstanding properties different from talc from the result of this paper; 1. Sericite was a good loading materials because the quantity of abrasion was small. 2. Sericite had a good physical properties of Foudrinier paper because brightness. ash content and water absorption were high. 3. Newsprint paper strengthes of additive talc were nigher than those of additive sericite.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.47-53
• /
• 2002

Three types of sludges including printing paper, newsprint and tissue paper were prepared at 5% concentration for filtration-expression operations. Filtration-expression characteristics of sludge were measured in different pressure and wastepaper powder dosage. Specific filtration resistance and porosity were calculated with theoretical formula. Higher pressure increased the progresses of filtration and expression while it decreased porosity. The addition of 5% wastepaper powder more accelerated the progresses of filtration and expression than that of 10% wastepaper powder. The lowest porosity value was also measured at 5% dosage of wastepaper powder. The decrease of porosity implied the decrease of moisture content in cake. The results indicated that dewatering of sludge was efficient in high pressure and 5% dosage of wastepaper powder.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.291-295
• /
• 1999

Coprinus cinereus 2249 that is a kind of basidiomycetes constitutively produced alkaline carboxymethyl cellulase (CMCase), filter paper cellulase (FPase) and xylanase. Crude enzymes prepared with optimal conditions showed higher FPase activity than CMCase activity. The FPase was most active at pH 9 at 50$^{\circ}C$. When applied on deinking of the old newsprint (ONP), it increases the freeness and brightness due to effect of hydrolysis at 0.1% enzyme concentration. Also, The physical properties of deinked pulp were improved.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.119-122
• /
• 2007

Actually, about 45% of total costs for wastewater treatment in a papermaking mill is spent for sludge disposal and the cost of chemicals used to improve the dewaterability of sludge takes much part of it. In order to reduce sludge disposal cost and to improve the efficiency of sludge treatment, it is necessary to minimize the amount of water contained within the sludge and hence to improve the dewaterability of the sludge. The objective of this study was to elucidate the way of improving the dewaterability of sludge. Three types of wastewater from a tissue paper mill, a printing paper mill and a newsprint mill were used and two types of high molecular weight flocculants (anionic PAM and cationic PAM) were used to treat the wastewater. Dewaterability of sludge was evaluated by measuring floc strength.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.5
• /
• pp.12-20
• /
• 2001

The consequence of water system closure and reduced water consumption in Paper Mills is increased white-water conductivity associated with increased total dissolved solids. This leads to difficulties man-aging the wet end chemistry of paper machines, mainly due to stearic hindrance effects on wet end chemical additives. This in turn causes poor productivity and Inefficient chemicals usage. The success of a number of projects is reported. The application and development of new multi-component micro-particle systems which can further assist in achieving a significant degree of system closure or Zero Effluent is described.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.1
• /
• pp.41-46
• /
• 2008

In this study, dewaterability, one of the important properties of wastewater sludge, was investigated using a simple capillary suction time (CST) measurement method. It turned out that one could use the results of CST to find optimum flocculants ratio to improve drainage in wastewater treatment for the printing paper, tissue paper, and newsprint paper mill. Since the optimum ratio of flocculants could be determined with the value of CST, COD removal efficiency could be improved and optimum floc strength could be achieved with precise ratio of flocculants. It was thus that using CST for determining the optimum ratio of flocculants could be economical by reducing the amount of flocculants. Dewaterability could be measured within several seconds using the values of CST in a precise way. The dewaterability could also be useful in investigating the optimum ratio of flocculants.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.961-967
• /
• 1998

In order to improve the optical properties and printability of paper, various fillers are used in papermaking. This study was performed to investigate several fillers-precipitated calcium carbonate(PCC), ground calcium carbonate(GCC), and blends(PCC/talc or micro-talc(MVP) and GCC/talc or micro-talc(MVP)-for their effects on various newsprint properties. Results obtained from the study were summarized as follows ; 1) PCC treatment gave about 16.8% higher retention than GCC treatment at the filler level of 5% and the retention of filler in the handsheet increased as average particle size of mixed filler was increasing($PCC{\leq}GCC<MVP<talc$). 2) PCC treatment kept opacity more highly than no filler treatment and opacity decreased as average particle size of mixed filler was increasing. 3) Independent treatment of PCC kept tear strength more effectively than GeC did, and tear strength increased as average particle size of mixed filler was increasing. 4) Independent treatment of pee kept tensile strength more highly than other treatments and Gee treatment kept tensile strength highly than pee treatment under mixed filler treatment. 5) Burst strength under PCC treatments decreased linearly as average particle size of mixed filler was increasing. 6) Compared "With non-filler treatment, filler treatment gave much better printability.

• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.133-147
• /
• 1994

Wastepaper recycling has significant implications not only in providing scarce raw material input for the paper industry but in environmental concerns such as reducing solid waste disposal, energy conservation and preservation of forest resources. The objectives of this study was (1) to develop an econometric model of demand for and supply of wastepaper, (2) to forecast wastepaper consumption and price to the year 2000 applying the econometric models estimated and (3) to estimate the elasticity of variables which are included in the wastepaper supply and demand equations. In this study wastepaper was classified into three groups, old newsprint, old corrugated and mixed For each group such as demand and supply equation were estimated. The demand equations were estimated as a function of paper and paper product consumption and wholesale price index and supply equations as a function of wastepaper price, one year lagged paper and paperproduct consumption and transportation price. Applying the econometric models to forcasting results in the future consumption and supply of wastepaper projected as 11.645 million MT and 7.396 million MT in 2000, respectively. The rate of wastepaper self-supply is forcasted about 63.5% in 2000. Especially, the rate of old neswprint self-supply is predicted about 16% which means about 2.2 million MT of old newsprint should be imported from foreign countries. Lastly, some policy measures to promote wastepaper recycling rate based upon economic and physical characteristics of wastepaper and market structure are suggested.