• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.786-793
• /
• 2010

This paper proposes a new method called the path-history coverage to generate a test suite to test the state transition behavior of the robot SW component. The proposed method generate a test suite which includes abnormal state transitions based on FSM of target component. Especially the proposed method covers the disadvantage of the mutation test method that the size of the test suite is explosively increasing. Examples including OPRoS Component[1] show the validity of the proposed method.

• 전자공학회논문지C
• /
• 제35C권12호
• /
• pp.49-58
• /
• 1998

본 논문에서는 무고정 부분 스캔 테스트 방법을 위한 새로운 스캔 선택 알고리즘에 대하여 논한다. 무고정 부분 스캔 테스트 방법은 모든 플립-플롭을 스캔하지 않는다는 점을 제외하면 완전 스캔과 동일한 테스트 방법이다. 이 테스트 방법은 테스트 벡터를 입력, 인가, 혹은 적용 등, 어느 때에도 스캔, 비스캔 중 어느 플립-플롭의 데이터 값도 고정하지 않는다. 제안된 스캔 선택 알고리즘은 무고정 부분 스캔 테스트 방법에서 완전 스캔 고장 검출율을 거의 유지하면서 많은 플립-플롭을 스캔하지 않게 한다.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.129-136
• /
• 1999

For the prediction of concrete-steel bond ability in reinforced concrete, many countries establish specifications for the pullout test. But these methods hardly to consider many parameters such as strength, shape, diameter and location of steel, concrete restrict condition by loading plate, strength of concrete and cover depth etc, and it is difficult to solve concentration and disturbance of stress. The purpose of this study is to propose a New Ring Test method which can be rational quantity evaluations of bond splitting mechanism. For this purpose, pullout test was carried out to assess the effect of several variables on bond splitting properties between reinforcing bar and concrete. Key variables are concrete compressive strength, concrete cover, bar diameter and rib spacing. Failure mode was examined and maximum bond stress-slip relationships were presented to show the effect of above variables. As the result, it appropriately expressed general characteristics of bond splitting mechanism, and it proved capability for standard test method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1005-1008
• /
• 1998

IC testing plays a very important role in IC manufacturing process. Modern complex ASIC chips making it difficult for gate level and RLT level test generation techniques to generate good test vector in resonable time. In this paper we proposed new test pattern generation method in VHDL description to detect manufacturing faults. This method based on software testing can easily generate test vector and independent to synthesis result.

• 대한산업공학회지
• /
• 제34권1호
• /
• pp.42-48
• /
• 2008

The house of quality (HOQ) involves subjective and ambiguous information typically through a likert scale, It isimportant to validate consistency of such input in the HOQ before rating the fmal importance of technicalrequirements, Previously, a methodology was developed to test the consistency of relationship strengths in theHOQ between roof matrix and relationship matrix. We described disadvantages of the previous method andpropose a new approach based on the permutation test. Advantages of the proposed method are illustrated withan example.

• Ocean Science Journal
• /
• 제40권4호
• /
• pp.201-208
• /
• 2005

An accurate particle tracking method for a finite difference method model is developed using a constant acceleration method. Being assumed constant temporal and spatial gradients, the new method permits temporal-spatial variability of particle velocity. Test results in a solid rotating flow show that the new method has second-order accuracy. The performance of the new method is compared with that of other methods; the first-order Euler forward method, and the second-order Euler predictor-corrector method. The new method is the most efficient method among the three. It is more accurate and efficient than the other two.

• 한국자동차공학회논문집
• /
• 제21권6호
• /
• pp.147-154
• /
• 2013

This study reports on the development and investigation of a BMS module using a new algorithm on the driving performance and battery life of electric vehicles. Here, the initial SOC was calculated using an open circuit voltage (OCV) method and a current integral method was later applied to the BMS module. We verified the performance of the BMS module by comparing both the results of the in-vehicle test and the BMS simulator test. Our verification test showed good agreement between the results of experiments and simulation with a small error of ${\pm}0.8%$. Here, we confirmed that the present, newly-developed BMS module not only can predict the battery life but can also monitor SOC, pack voltage, and current temperature.

• 경영과학
• /
• 제22권2호
• /
• pp.1-12
• /
• 2005

New method has been widely used for teaching Management Science since the mid of 1990s. The new teaching method is distinguished from traditional method in several aspects. The mowt distintion of the new method is that Excel based approach is used in order to model and analyze quantitative problems. Due to the introduction of Excel based teaching method model formulation and interpretation is more emphasized than algorithms. By using this new method students are expected to be more interested in Management Science class and easily use several Management Science techniques in real world problems. Though Excel based teaching method has become more prevalent, there exist no empirical research to analyze the effectiveness of Excel based teaching method. This paper will empirically analyze how effective Excel based teaching method is. For this purpose survey data are collected fro professors teaching Management Science and analyzed by using t-test.

• 천문학회지
• /
• 제32권1호
• /
• pp.65-73
• /
• 1999

In this study we present a new improved nonlinear calibration method for vector magnetograms made by the Solar Flare Telescope of BOAO. To identify Fe I 6302.5 line, we have scanned monochromatic images of the line integrated over filter passband, changing the location of the central transmission wavelength of a Lyot filter. Then we obtained a filter-convolved line profile, which is in good agreement with spectral atlas data provided by the Sacramento Peak Solar Observatory. The line profile has been used to derive calibration coefficients of longitudinal and transverse fields, employing the conventional line slope method under the weak field approximation. Our improved nonlinear calibration method has also been used to calculate theoretical Stokes polarization signals with various angles of inclination of magnetic fields. For its numerical test, we have compared input magnetic fields with the calibrated ones, which have been derived from the new improved non-linear method and the conventional method respectively. The numerical test shows that the calibrated fields obtained from the improved method are consistent with the input fields, but not with those from the conventional method. Finally, we applied our new improved method to a dipole model which characterizes a typical field configuration of a single, round sunspot. It is noted that the conventional method remarkably underestimates the transverse field component near the inner penumbra.

• 한국정보처리학회논문지
• /
• 제7권10호
• /
• pp.3226-3235
• /
• 2000

반도체 집적 회로가 점점 복잡해지고 고속화되면서 반도체 집적 회로의 동작에 대한 검사 뿐 아니라, 회로가 원하는 시간 내에 동작함을 보장하는 지연 고장 검사의 중요성이 점점 커지고 있다. 본 논문에서는 경로 지연 고장에 대한 효율적인 테스트 입력 생성을 위하여 새로운 부분 확장 주사 방법을 제안한다. 본 논문에서는 유추와 할당을 적용한 테스트 입력 자동 생성기를 기반으로 하여 새로운 부분 주사 방법을 구현하였다. 우선적으로 표준 주사환경에서 테스트 입력을 생성한 후에 테스트 입력이 제대로 생성되지 않은 주사 사슬에 대하여 테스트 입력 생성기를 수행하는 동안의 정보를 이용하여 확장 주사 플립플롭이 적용될 플립플롭을 결정하였다. 확장 주사 플립플롭을 결정하는 기준으로서는 고장 검출율과 하드웨어 오버헤드를 사용하였다. 순차 회로인 ISCAS 89 벤치 마크 회로를 이용하여 실험을 수행하였으며, 실험을 통하여 표준 주사와 확장 주사 환경, 부분 확장 주사 환경에서 고장 검출율을 비교, 확인하였다. 그리고 새로운 알고리즘이 적용된 부분 확장 주사 방법에서 높은 고장 검출율을 확인함으로써 효율성을 입증하였다.