• Journal of The Korean Association For Science Education
• /
• v.37 no.3
• /
• pp.493-505
• /
• 2017

The purpose of this study is to investigate the trends of character-related research in science education by analyzing science education research literatures in South Korea. To this end, literatures on character were extracted from the KCI-listed journals and theses from 1990 to December 2016, and analyzed according to the criteria such as terms relating to character, year of publication, research design and method, and research content. A total of 54 KCI-listed papers and 67 theses were extracted. As a result, 46%, 49%, and 5% of the researches include the terms like character, ethic, and moral in their titles. According to the year of publication, it was found that the number of research papers related to character increased rapidly by more than two times in 2012 as compared to the past years. According to research objects, researches about gifted students were the most common, and when considering the ratio of gifted students to general students, many studies related to character concentrated on gifted students. Starting 2009, research papers on qualitative and hybrid research design begin to advance as compared the number of papers in quantitative research design. With regards to research methods used, seven methods were classified; five of them ranged from 16% to 19% while interpretive research method was 12% and test tool validity study was the lowest at 2%. By extracting 30 representative keywords so as to analyze the contents of character-related researches, we found various implications to character in relation to nature and researches about SSI, etc. As time passed by, the contents of character-related research in science education became more diversified and the number of researches increased. New research contents appeared due to the needs of the times.

• Journal of Periodontal and Implant Science
• /
• v.46 no.6
• /
• pp.372-381
• /
• 2016

Purpose: The aim of this study was to determine the relationship between buccal bone thickness and gingival thickness by means of a noninvasive and relatively accurate digital registration method. Methods: In 20 periodontally healthy subjects, cone-beam computed tomographic images and intraoral scanned files were obtained. Measurements of buccal bone thickness and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0-5 mm from the alveolar crest on the superimposed images. The Friedman test was used to compare buccal bone and gingival thickness for each depth between the 3 tooth types. Spearman's correlation coefficient was calculated to assess the correlation between buccal bone thickness and gingival thickness. Results: Of the central incisors, 77% of all sites had a buccal thickness of 0.5-1.0 mm, and 23% had a thickness of 1.0-1.5 mm. Of the lateral incisors, 71% of sites demonstrated a buccal bone thickness <1.0 mm, as did 63% of the canine sites. For gingival thickness, the proportion of sites <1.0 mm was 88%, 82%, and 91% for the central incisors, lateral incisors, and canines, respectively. Significant differences were observed in gingival thickness at the alveolar crest level (G0) between the central incisors and canines (P=0.032) and between the central incisors and lateral incisors (P=0.013). At 1 mm inferior to the alveolar crest, a difference was found between the central incisors and canines (P=0.025). The lateral incisors and canines showed a significant difference for buccal bone thickness 5 mm under the alveolar crest (P=0.025). Conclusions: The gingiva and buccal bone of the anterior maxillary teeth were found to be relatively thin (<1 mm) overall. A tendency was found for gingival thickness to increase and bone thickness to decrease toward the root apex. Differences were found between teeth at some positions, although the correlation between buccal bone thickness and soft tissue thickness was generally not significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.157-163
• /
• 2016

BIM is currently applied in some domestic construction firms, but it is not being actively utilized due to changes in working environments and qualms about new studies. In order to utilize a BIM model in the design phase, process information is needed during construction, but the input system and utilization method of the process information's state are not complete. Therefore, we propose a BIM template for construction progress management that can show basic BIM information as the construction progresses in an easy and convenient way. This method will facilitate the adoption of BIM and enhance the productivity of construction companies. To this end, we designed a progress explorer for step-by-step progress and work schedules, and we generated three-dimensional views and a progress list by applying unit information (primary units, part units, and detail units) of the work breakdown structure (WBS) to the parameters. To use the BIM template, work progress information is input to the BIM modeling objects through Dynamo. We also used Dynamo for quick and easy calculation of the quantity of materials needed for construction work. To test the BIM template, we applied it to an actual project and evaluated its visibility and a progress list. The results showed that the proposed BIM template facilitates progress management of a project and can thus facilitate the adoption of BIM and improve the productivity of construction companies.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.179-190
• /
• 2009

Travel time is one of the most important traffic parameters to evaluate operational performance of freeways. A variety of methods have been proposed to estimate travel times. One feasible solution to estimating travel times is to utilize existing loop detector-based infrastructure since the loops are the most widely deployed detection system in the world. This study proposed a new approach to estimate travel times for freeways. Inductive vehicle signatures extracted from the loop detectors were used to match vehicles from upstream and downstream stations. Ground-truthing was also conducted to systematically evaluate the performance of the proposed algorithm by recognizing individual vehicles captured by video cameras placed at upstream and downstream detection stations. A lexicographic optimization method vehicle reidentification algorithm was developed. Vehicle features representing the characteristics of individual vehicles such as vehicle length and interpolations extracted from the signature were used as inputs of the algorithm. Parameters associated with the signature matching algorithm were calibrated in terms of maximizing correct matching rates. It is expected that the algorithm would be a useful method to estimate freeway link travel times.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.2
• /
• pp.78-90
• /
• 2016

This report is to introduce detail processes during the restoration/revision project for the Korean Standard Methods for Marine Environment. The processes are composed of 3 steps: questionaries, QA/QC confirming step by CRM(Certified Reference Materials), and advisory council by specialists. The questionaries required four main topics to be included to the restoration/revision protocol: 1. the guidelines to sampling, transportation, storage, and pre-analytical procedures for the marine specimens, 2. the unified analytical method, especially for the organic compounds, 3. the QA/QC test requirement for CRM, 4. introduction of diverse analytical instruments, 5. the customer- friendly express of the protocol. Based on these new protocol, we expect two most important effects: 1, increased insurance of international credibility and equivalence by the QA/QC procedures, 2. increased conformability and representatively from wide-spread use of the protocol. Finally we suggested several residual topics remained to the inter-government cooperation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.204-205
• /
• 2011

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is a most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. For best performance of thin film silicon solar cell, the dopant profiles at p/i and i/n interfaces need to be as sharp as possible. The sharpness of dopant profiles can easily achieved when using multi-chamber PECVD equipment, in which each layer is deposited in separate chamber. However, in a single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of a single-chamber PECVD system in spite of the advantage of lower initial investment cost for the equipment. In order to resolve the cross-contamination problem in single-chamber PECVD systems, flushing method of the chamber with NH3 gas or water vapor after doped layer deposition process has been used. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. A single-chamber VHF-PECVD system was used for superstrate type p-i-n a-Si:H solar cell manufacturing on Asahi-type U FTO glass. A 80 MHz and 20 watts of pulsed RF power was applied to the parallel plate RF cathode at the frequency of 10 kHz and 80% duty ratio. A mixture gas of Ar, H2 and SiH4 was used for i-layer deposition and the deposition pressure was 0.4 Torr. For p and n layer deposition, B2H6 and PH3 was used as doping gas, respectively. The deposition temperature was $250^{\circ}C$ and the total p-i-n layer thickness was about $3500{\AA}$. In order to remove the deposited B inside of the vacuum chamber during p-layer deposition, a high pulsed RF power of about 80 W was applied right after p-layer deposition without SiH4 gas, which is followed by i-layer and n-layer deposition. Finally, Ag was deposited as top electrode. The best initial solar cell efficiency of 9.5 % for test cell area of 0.2 $cm^2$ could be achieved by applying the in-situ plasma cleaning method. The dependence on RF power and treatment time was investigated along with the SIMS analysis of the p-i interface for boron profiles.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.173-183
• /
• 2012

The nature of surface deformation of Tono granite was investigated using a confocal laser scanning microscope (CLSM) under water-saturated stress relaxation conditions. A new apparatus was developed for this experiment, enabling continuous measurements of stress-strain and simultaneous observations of surface deformation by CLSM. The amounts of grain contact deformation and intra-granular surface deformation were calculated using a finite element method. The results reveal that intense grain contact deformation and intra-granular surface deformation occurred during the period of stress relaxation, and that the intensity of this deformation increased with increasing applied stress. Finite element method (FEM) results show that the strain of grain boundary was greater than strain of inter-granular surface. Contour maps of these local strains were compiled for individual grains and their boundaries, revealing intense deformation at the boundaries between biotite and quartz under compressional stress. This result was a consequence of the mechano-chemical effect of biotite and quartz minerals. Biotite in granite has a layered structure of iron-magnesium-aluminum silicate sheets that are weakly bonded together by layers of potassium ions. In contrast, quartz occurs as stable spherical grains.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.279-286
• /
• 2017

Determination of the order of latent fingerprints deposition on the surface of thermal paper, often found in crime scenes, is related to the study of time course and aging of fingerprints and can provide additional information in criminal investigations. A preliminary study was performed to determine the deposition order of fingerprints left with two different conditions of deposition pressure and time (in seconds) after 1 day intervals for 7 days on thermal paper (receipt and fax thermal paper) using an iodine fuming method. The resultant images of the visualized fingerprints were analyzed with densitometric image analysis to measure the changes in the areas of the ridges, which can be correlated to the deposition order. No significant variation was found with the different types of thermal paper. The average areas of the friction ridges increased gradually or were similar to the values from day 1 for 3 days, and then a continual decrease was shown from day 4 through day 7. The area values from day 6 and day 7 were less than half of those from day 1. Furthermore, the test with overlapped fingerprints showed the possibility of differentiation between fingerprints that are 1-3 and 6-7 days old based on the clarity visible to the naked eye. Additional experiments with the deposition conditions can prove that the current method is valuable for the determining the order of fingerprint deposition on thermal paper.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.304-313
• /
• 2019

Biopolymer based on microbial β-glucan and xanthan gum is effective for vegetation and has a function of enhancing soil strength, which can be used as soil reinforcement and stabilization materials in river embankment. The purpose of this study is to verify the vegetation effect of the surface of levee by biopolymer with seed spraying method. Mixed soils with biopolymer were used to cover the surface of embankments. The strength is higher in biopolymer-treated soil and xanthan gum based biopolymer has advantage for quality control in field scale. In addition, the vegetation of F. arundinacea and L. perenne showed various reactions with types of biopolymers. Biopolymer has a positive effect on the vegetation of them. In contrast, root growth tended to decrease in biopolymer-treated soils. The results indicate that root growth is slow down due to increasing ability to retain water in biopolymer-treated soil. In order to apply biopolymer to river embankment, it is necessary to examine the effects of biopolymers on a wide range of plant species in river embankment.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.95-120
• /
• 2011

Modern society is the age of the information. As new information is springing up every day and pace of change becomes faster, the importance of communication skills is growing. The recent mathematics education is recognized as not a fragmentary mathematical knowledge or results of the learning, but a procedure of mathematical thinking, and the effective expression skill of their mathematical ideas and the ability to forward it to others are regarded very serious. As the method of mathematics evaluation, mathematical essay is introduced to replace the existing multiple-choice written test. This method assess the ability which students have, that express the reorganized knowledge and information according to given situation by themselves. Ultimately, it is expected to help that students get the higher order thinking skills such as logical thinking and creativity. However, definition of elementary mathematical essay is unclear, and proper teaching methods is lacking for each stage of elementary school students. Thus, in this paper, I have defined the concept of elementary mathematical essay and made a foundation of elementary mathematical essay research, then researched about the effective utilization of elementary mathematical essay using school education. Also elementary mathematical essay teaching-learning materials is developed and applied to analyzed the students' responses. Using this program, in real elementary school education, the implications has deduced.