• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.125-138
• /
• 2023

Most of previous cesium (Cs) sorbents have limitations on the treatment in the large-scale water system having low Cs concentration and high ion strength. In this study, the new Cs sorbent that is eco-friendly and has a high Cs removal efficiency was developed by improving the coal mine drainage treated sludge (hereafter 'CMDS') with the addition of Na and S. The sludge produced through the treatment process for the mine drainage originating from the abandoned coal mine was used as the primary material for developing the new Cs sorbent because of its high Ca and Fe contents. The CMDS was improved by adding Na and S during the heat treatment process (hereafter 'Na-S-CMDS' for the developed sorbent in this study). Laboratory experiments and the sorption model studies were performed to evaluate the Cs sorption capacity and to understand the Cs sorption mechanisms of the Na-S-CMDS. The physicochemical and mineralogical properties of the Na-S-CMDS were also investigated through various analyses, such as XRF, XRD, SEM/EDS, XPS, etc. From results of batch sorption experiments, the Na-S-CMDS showed the fast sorption rate (in equilibrium within few hours) and the very high Cs removal efficiency (> 90.0%) even at the low Cs concentration in solution (< 0.5 mg/L). The experimental results were well fitted to the Langmuir isotherm model, suggesting the mostly monolayer coverage sorption of the Cs on the Na-S-CMDS. The Cs sorption kinetic model studies supported that the Cs sorption tendency of the Na-S-CMDS was similar to the pseudo-second-order model curve and more complicated chemical sorption process could occur rather than the simple physical adsorption. Results of XRF and XRD analyses for the Na-S-CMDS after the Cs sorption showed that the Na content clearly decreased in the Na-S-CMDS and the erdite (NaFeS₂·2(H₂O)) was disappeared, suggesting that the active ion exchange between Na⁺ and Cs⁺ occurred on the Na-S-CMDS during the Cs sorption process. From results of the XPS analysis, the strong interaction between Cs and S in Na-S-CMDS was investigated and the high Cs sorption capacity was resulted from the binding between Cs and S (or S-complex). Results from this study supported that the Na-S-CMDS has an outstanding potential to remove the Cs from radioactive contaminated water systems such as seawater and groundwater, which have high ion strength but low Cs concentration.

• Journal of Chest Surgery
• /
• v.36 no.6
• /
• pp.397-403
• /
• 2003

Background: The research sought to identify the clinical features of pleomorphic carcinoma of the lung generally known as a rare subtype in accordance with the lung cancer classification done in 1999 by WHO. Material and Method: 250 cases of surgically resected lung cancers were collected in this hospital from January 1992 to December 2001. This study included 42 cases of pleomorphic carcinoma diagnosed through light microscope and immunohistochemistry. Result: Out of 42 cases, males represented 31, and females 11, the age ranged from 26 to 77. Main clinical symptoms included coughing, hemoptysis, sputum. Diagnoses disclosed the stage as stage la in 3 cases (7%), Ib in 16 (38%), IIa in 1 (2%), IIb in 8 (19%), IIIa in 15 (35%), and IIIb in 1 (2%). Out of these, no lymph node metastasis was represented in 23 cases (54%), while N1 and N2 involving lymph node metastasis was shown 19 cases (46%). A total of 19 patients developed metastasis, comprising the brain in 5 cases (26%), bone in 4 (21%), muscle in 4 (21%), Lymph node in 2 (10%), and 1 liver, ovary, contralateral lung, and adrenal gland, respectively. The size of the tumor ranged from 1 cm to 11 cm, averaging 5.85 cm. Out of the 42 patients, the total two-year and five-year survival rates in accordance with the Kaplan-Meier method represented 26% and 13%, respectively, These figures compared to the corresponding 44% and 34% in cases other than pleomorphic carcinoma from the survey target of 256 cases, proved to be significantly low (p<0.002). No significant difference was found in the survival rates compared between age and tumor size, between stage I and above stage II, and between N0 and above N1. Patients who developed postoperative metastasis all died, and showed significantly low survival rates (p<0.002) compared to those patients without metastasis. Conclusion: With the new diagnosis method of f999 WHO's lung cancer classification applied, pleomorphic carcinoma showed a higher prevalence rate than under previous classifications, their postoperative survival rate was significantly low compared to histologic type of non small cell lung carcinomas.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.179-188
• /
• 2014

Purpose: The present study was aimed to investigate the cleaning efficacy of multi-purpose solutions containing different types and content of surfactants and their effect on the visible light transmittance of soft lens. Methods: Soft lenses made of different materials (etafilcon A and hilafilcon B) were deposited tear proteins by using the artificial tear and then compared the resulting cleaning efficacy and visible light transmittance after cleaning the lens with 6 types of multi-purpose solutions containing different content of surfactants. Results: The cleaning efficacy of multi-purpose solutions was variously shown as approximately 23~43% according to the active concentration of surfactants and surface tension in multi-purpose solution when etafilcon A lens cleaned with rubbing. The highest cleaning efficacy was detected when cleaned with the multi-purpose solution containing hydrogen peroxide besides surfactant however, the amount of remaining protein was still high on the lens. After washed with multi-purpose solution, the visible light transmittance of lens was in 89.8 to 90.8%. The amount of protein deposited on hilafilcon B lens was very small compared with it on etafilcon A lens even though it was incubated in artificial tears for 7 days, which showed 5~10% of protein amount in etafilcon A lens and the decrease of visible light transmittance was also not significant. In case of rubbing with multi-purpose solution, the cleaning efficacy on hilafilcon B lens was in 45.4 to 67.4% however, the order of cleaning efficacy of multi-purpose solution was different from it on etafilcon A lens. The visible light transmittance of hilafilcon B lens has been restored to the level of new lens. Conclusions: From the result, it is concluded that the appropriate multi-purpose solution should be selected according to the lens material and the amount of protein deposit on the basis of understanding surfactants and active principle for proper care of protein deposit on soft lens and the cleaning with rubbing is more efficient for lens care regardless of manufacturer's guideline.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.4
• /
• pp.10-20
• /
• 2014

This study was carried out for the purpose of analysis correlations between street furniture design elements and preference of street furniture. This research analyzed the various street furniture set on Ilsan new town street, which are rest, hygiene, light, information, sale, traffic, and landscape. This study has processed by analysing street furniture literature investigation and consideration of theory. First, for analysed effect of street furniture element, has been appear as element 'relaxation facilities', 'information facilities', landscape facilities' mainly effect on street. Specially, 'rest', 'landscape', 'information' in order had a major influence on scenery. Each kind of 'chair elements' in rest facilities, 'sign board' in information facilities, 'sculpture', 'fountain' in 'landscape facilities' has analyzed as the main elements in the landscape affinity property affecting factor. Second, the results of analyzed landscape elements (shape, colour, texture, scale) affect to the affinity of street furniture. chair which are included in rest facilities affect "texture", "form", "scale", "color" in the order of preference of the molding design elements that influence landscape. Particularly, showed statistically significant on 'colour' element affecting the landscape preference than the other three elements. It means as the chair element which is rest facilities mainly affect on preferences, rather than texture, form, scale, colour. Monument in the landscape associated with a preference 'colour', 'shape', 'texture' 'scale' and appears to be in order of impact so we could get the consequence like chair and rest facilities show different aspects of the respectively. It means, visual element which are colour and shape significantly impact on landscape preferences. Third, information facilities such as signboard formative elements of landscape design preferences and correlation with negative showed that the correlation. That mean if the sign board is very negative influence on landscape preferences and the correlations of the design formative elements appear in order of 'scale', 'colour', 'texture'. It also means that the 'scale' namely the size of advertising material and colour are adversely affected in terms of landscape. As these results, when design street furniture as the street scenery, facilities according to the kind of the shape element and need to focus on relative shape element according to the kind of facilities difference. Finally, so far as to clarify the street furniture, mainly 'function' and 'system' classification shows undesirable in outdoor scape. Thus, performed studies in relationship with landscape, classify 'kind of facilities' is more desirable than 'system'.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.1012-1017
• /
• 2017

Mesembryanthemum crystallinum (Family: Aizoaceae) is an annual plant consisting of ice crystal-shaped bladder cells, which is responsible for its common name ice plant. This study investigated biological activities according to general components and extraction solvent in order to examine the functionality of ice plant. The total content of free amino acids was 32.57 mg/g, including 4.64 mg/g of L-alanine as the most abundant and 2.60 mg/g of ${\gamma}$-aminobutyric acid. Regarding angiotensin converting enzyme inhibitory activities of solvent fractions of ice plant, ethyl acetate fraction and chloroform fraction showed activities of $33.17{\pm}3.20{\sim}88.19{\pm}3.20%$ and $23.72{\pm}2.89{\sim}86.78{\pm}2.24%$, respectively, similar to $Captopril^{(R)}$ ($19.51{\pm}3.44{\sim}84.72{\pm}1.06%$) and $Enalapril^{(R)}$ ($24.93{\pm}1.12{\sim}91.32{\pm}3.62%$) as positive control groups. Regarding inhibition of lipid droplet production in 3T3-L1 preadipocytes by ice plant, anti-adipogenic activities were $53.00{\pm}0.45{\sim}65.75{\pm}0.31%$ and $44.16{\pm}0.29{\sim}63.32{\pm}0.36%$ in the ethyl acetate fraction and butanol fraction, respectively, showing the lowest lipid droplet production. The chloroform fraction and hexane fraction showed activities of $38.33{\pm}0.09{\sim}56.55{\pm}0.50%$ and $31.17{\pm}0.50{\sim}55.10{\pm}1.93%$, respectively, whereas the water fraction showed activity of $26.32{\pm}2.27{\sim}49.48{\pm}0.05%$. Therefore, all solvent fractions inhibited fat accumulation of 3T3-L1 preadipocytes according to treatment concentration. According to the results above, it would be possible to utilize ice plant as a new health functional material.

• Journal of Nutrition and Health
• /
• v.48 no.4
• /
• pp.310-318
• /
• 2015

Purpose: The aim of this study is to investigate anti-arthritis activity using natural eggshell membrane (NEM). Methods: NEM was administered at 52 mg/kg, 200 mg/kg, and 400 mg/kg to SD-Rat, where arthritis was induced by monosodium iodoacetate (MIA) at 3 mg. NO production in serum was measured using Griess reagent. Cytokines including IL-$1{\beta}$, and IL-6 were measured by Luminex and $PGE_2$, MMP-2, MMP-9, TIMP-1, $LTB_4$, and hs-CRP were measured by ELISA. The cartilage of patella volume was examined and 3-D high-resolution reconstructions of the cartilage of patella were obtained using a Micro-CT system. Results: Production of NO, IL-$1{\beta}$, IL-6, $PGE_2$, MMP-2, MMP-9, TIMP-1, $LTB_4$, and hs-CRP in serum was decreased, respectively, in comparison with control. The cartilage of patella volume increased significantly. In addition, the NEM group showed a decrease in the cartilage of patella, synovial membrane, and transformation of fibrous tissue. Conclusion: The results for NEM showed significant anti-arthritis activity. These results may be developed as a raw material for new health food to ease the symptoms mentioned above.

• Journal of Acupuncture Research
• /
• v.19 no.3
• /
• pp.107-114
• /
• 2002

Objective : This study was designed to find the most effective and safest way to overcome Lumbago due to blood stasis and sprain involved in a few Meridian Tendino-musculatures by evaluating the effect of two kinds of Dong-gi(Dong-qi) Acupuncture(DGA) and by reporting their side effects. Material : 97 patients of out and admission patients were selected, who were diagnosed with lumbar sprain caused by repetitive bending, heavy weight lifting, unsuitable posture, concussion and falling down and whose Lumbago due to blood stasis and sprain in the concept of oriental medicine. Methods : 97 patients were divided into three groups. One is exclusive DGA group to which DGA and the method retaining needles on the acupoints for about 20 minutes were applied, the other is DGA combined active exercise group in which patients stretched their Meridian Tendino-muscuIatures with their hips moving up and downward repeatedly during DGA, the third is DGA combined passive exercise group in which patients were made to flex or extend their bodies on the auto flexion-distraction table in a prone position, from 10 to 20 degree, during DGA. In each group, bed rest, physical therapy and herbal medicine were used according to symptoms, in addition to DGA. In DGA method, "Su(Shu)" points of the meridian related to the involved Meridian Tendino-musculature were mainly chosen, that is, Sokkol(Shugu, B65), Hugye(Houxi, SI3), ChungJo(Zhongzhu, TE3) were used, for most LBP belonged to Bladder and Gallbladder Meridian Tendino-musculature disorders. Pyong-Bo-Pyong-Sa(Ping-Bu-Ping-Xie) such as Dong-Gi and Yeom-Jeon(Nian-Zhuan) was applied as Bo-Sa method. For evaluation of effectiveness, new score system was devised by severity of pain and range of movement. the score was given twice at patients' first and last visit and the difference between first and last score was regarded as a evaluation scale, the effectiveness was classified into four grade by evaluation scale.(scale : 12-15; excellent, 8-11; good, 4-7; fair, 0-3; bad) Results : 1. Exclusive DGA, DGA combined active exercise and DGA combined passive exercise group showed 97, 87 and 89% in effectiveness. 2. Exclusive DGA, DGA combined active exercise and DGA combined passive exercise group showed no aggravation of pain, range of movement. 3. In blood test of 34 patients, only one patient showed abnormal rise of sGOT, sGPT and $\gamma$-GTP at his first visit and the others didn't show any detrimental change. DGA had no bad influence upon BUN and creatinine of patients. Conclusion : For complex theraphy combining DGA, exercise, physical therapy and Herbal medicine proved to be highly effective on treating lumbago due to blood stasis and sprain, this is expected to be available for clinical use.

• The Research Journal of the Costume Culture
• /
• v.3 no.2
• /
• pp.241-260
• /
• 1995

The Maori's traditional clothing materials, basic forms of dress, and the pattern and technique of tatoo were examined in the present study in order to deepen the appreciation of the cultural heritage of the Maori. The research method employed was the analysis of written materials. And a fild-trip was also made for the study. The study was limitted to the traditional culture of body adornment of the Maori including the clothing which is preserved and practicing by them at the present day, and the origin and the process of the historical development of those are not included in the scope of the present study. Followings are the results of the study: (1) By far the most widely used fiber for Maori clothing is abtained from what is commonly called New Zealand Flax. The fiber of kiekie(Freycinetia baueriana) and cabbage trees(Cordyline spp.) may also be used. The strong, long-lasting fiber of toi(cordyline indivisa) is used for a prestige warrior's cloak. Flat strips of ti kauka(Cordyline australi) are also used as thatch on rain cloaks. (2) Regardless of technique used, Maori weaving is always worked horizontally from left to right. Traditionally the work was suspended between two upright turuturu or weaving sticks. As the work progressed a second pair of uprights was used to keep the work off the ground. These uprights were moved forward as required. Because the weaver sat on the ground, the working edge was kept at a height that was comfortable to reach. No weaving tools are used, the wefts(aho) being manipulated by the fingers. The two main Maori weaving techniques are whatu aho patahi(single-pair twining) and whatu aho rua(double-pair twining). (3) The Maori wore two basic garments - a waist met and a cloak. The cloth of commoners were of plain manufacture, while those of people of rank were superior, sometimes being decorated with feather or dyed tags and decorated borders. Children ran more-or-less naked until puberty, being dressed only for special events. Some working dress consisted of nothing more than belts with leaves thrust under them. Chiefs and commoners usually went barefoot, using rough sandals on journeys over rough country (4) The adornment of men and women of rank was an important matter of tribal concern as it was in chiefly persons that prestige of the group was centred, The durable items of Maori persons adornment were either worn or carried. Ornaments of various kinds were draped about the neck or suspended from pierced earlobes. Combs decorated the head. Personal decorations not only enhanced the appearance of men and women, but many had protective magical function. The most evident personal ornament was the hei-tiki made of jade or other material. Maori weapons were treasured by their owners. They served on bottle and were also personal regalia. A man of rank was not fully dressed without a weapon in hand. Also weapons were essential to effective oratory. (5) No man or woman of rank went without some tattoo adornment except in extremely rare instances when a person was too sacred to have any blood shed. The untattooed were marked as beeing commoners of no social standing. This indelible mark of rank was begun, with appropriate rite and ritual, at puberty. And tattoo marked the person as being of a marriageable age. Maori tattoo was unlike most traditional tattoo in that its main line were 'engraved' on the face with deep cuts made by miniature bone chisels. The fill-in areas were not tattooed with cuts but with the multiple pricks of small bone 'combs' that only lightly penetrated the skin surface. The instrument of tattoo consisted of small pots of pumice or wood into which was placed a wetted black pigment made from burnt kauri gum, burnt vegetable caterpillars or other sooty materials. A bird bone chisel or comb set at right angles on a short wooden handle was dipped into the gigment, that a rod or stick was used to tap head of this miniature adze, causing penetration of the skin surface. Black pigment lodged under the skin took on a bluish tinge. A full made facial tattoo consisted of major spirals with smaller spirals on each side of the nose and sweeping curved lines radiating out from between the brows over the forehead and from the nose to the chin. The major patterns were cut deep, while the secondary koru patterns were lightly pricked into the skin.