• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.175.1-175.1
• /
• 2011

A rotating activated bacillus contactor (RABC) process with a series of aerobic reactors was tested in pilot scale to treat digested liquid from an anaerobic digester treating swine wastewater and sewage sludge. The influent (digested liquid) for the RABC process showed C/N ratios less than 2 as a typical feature of effluent from anaerobic digesters. The pilot process, which consists of three 3 RABC reactors, four aerobic tanks and a sedimentation tank, was operated for 210 days with a hydraulic retention time of 20 days without pH and temperature control. Since the Bacillus-enriched aerobic reactors shows high efficiencies of nitrogen removal at low DO levels less than 1.0 mg/L, they were operated at reduced aeration intensities. With relatively low concentrations of organics in comparison with nitrogen concentrations, the RABC process tested in this study showed stable and high nitrogen and organics removal efficiencies over 80%. The nitrogen removal process tested in this study was proven to be an effective and operation-cost saving (lower aeration) method to remove nitrogen without adding external carbon sources to meet the optimum C/N ratio.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.362-366
• /
• 2007

Magnesium and magnesium alloys are promising materials for light weight and high strength applications. In order to obtain homogeneous and high quality products in powder compaction and powder forging processes, it is very important to control density and density distributions in powder compacts. In this study, a model for densification of metallic powder is proposed for pure magnesium. The mode] considers the effect of powder characteristics using a pressure-dependent critical density yield criterion. Also with the new model, it was possible to obtain reasonable physical properties of pure magnesium powder using cold iso-state pressing. The proposed densification model was implemented into the finite element method code. The finite element analysis was applied to simulating die compaction of pure magnesium powders in order to investigate the density and effective strain distributions at room temperature.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.45-50
• /
• 2011

Compression pressure of individual cylinder and valve timing have big influence on combustion pressure, indicated mean effective pressure (IMEP), emission, vibration, combustion noise and many other combustion parameters. Conventional method, however, to check compression pressure uniformity is done by mechanical pressure gage and valve timing is checked manually. This conventional method causes inaccuracy of cylinder pressure measurement because of different cranking speed results from battery status and temperature. Also to check valve timing, related FEAD parts should be disassembled and timing mark should be checked. This study describes and suggests new methodology to measure compression pressure by analysis of start motor current and to check valve timing by cylinder pressure with high accuracy. Results, it is found that detection of bulky as well as small leaky cylinder is possible by cranking motor current analysis and wrong valve timing can be detected by cylinder pressure analysis and cam and crank sensor signal.

• 대한영양사협회학술지
• /
• 제9권4호
• /
• pp.273-277
• /
• 2003

The purpose of this study was to examine sanitation management practices of restaurant managers for the training needs analysis. A total of 26 restaurant managers participated in this study. A check list was consisted of three parts : facility, personal, and food hygiene. Two observers and one manager evaluated the same check list at same time and the results were compared. The results of this study suggested that most restaurants have needed for re-training programs in the view of facility, personal, food sanitation practices. Specially, proper washing and sanitizing methods for hands and utensils, proper cooking and holding temperature, and proper storing methods were needed to be trained. Based on this study, most independent restaurant managers in Cheonan were aware of training, but they had no effective training program manuals. Results of this study implicated that dietitians have new opportunity for consultants of independent restaurants in the region because they have practiced sanitation management manuals.

• 한국미생물·생명공학회지
• /
• 제13권2호
• /
• pp.151-156
• /
• 1985

Lactobacillus helveticus YM-1 과 Streptococcus thermophilus CH-1을 환원탈지유 배지에 접종하여 생육특성 및 배양조건을 검토한 결과 두 균은 전형적인 공생을 나타냈으며 혼합배양시 최적 pH와 온도는 각각 6.5와 4$0^{\circ}C$였다. 또한 두 균 사이에는 단백질 분해력의 차이가 현저하였고 L.helveticus의 배양여액에는 S. thermophilus의 생육을 촉진시키는 물질이 함유되어 있음을 관찰하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.377-381
• /
• 2004

A discharge plasma reactor using a ferroelectric pellet packed bed is now used as a removal means of pollutant gases, such as NOx, SOx and VOCs. When an ac voltage is applied to this plasma reactor, then the pellets are polarized, and great electric fields are formed at each top and bottom contact points of the ferroelectric pellets. Thus the points of each pellet become covered with intense corona discharges, where an electrophysicochemical reaction is taking place strongly However these strong discharges also elevate the temperature of the pellets greatly and concurrently decrease the output ozone generation, as a result, the overall removal efficiency of gas becomes decreased greatly A new configuration of discharge plasma reactor using a ferroelectric pellet layer and a wire-to-wire electrode has been proposed and investigated experimentally. It is found that an intensive microdischarge is taking place on the surface of ac corona-charged ferroelectric pellet layer of the proposed reactor, which concurrently enhances the efficiency of plasma generation greatly And, this type of configuration of plasma reactor utilizing a wire-to-wire electrode and a ferroelectric pellet layer could be used as one of effective plasma reactors to remove pollutant gas.

• Structural Engineering and Mechanics
• /
• 제28권6호
• /
• pp.695-713
• /
• 2008

The aim of this contribution is to present a new link/beam finite element suitable for electrothermo-structural analysis of uni-axially graded materials. Continuous polynomial variation of geometry and material properties will be considered. The element matrix and relations for solution of Joule's heat (and its distribution to the element nodes) have been established in the sense of a sequence method of a coupled problem solution. The expression for the solution of nodal forces caused by a continuously distributed temperature field has also been derived. The theoretical part of this contribution is completed by numerical validation, which proves the high accuracy and effectiveness of the proposed element. The results of the performed experiments are compared with those obtained using the more expensive multiphysical link element and solid element of the FEM program Ansys. The proposed finite element could be used not only in the multiphysical analysis of the current paths and actuators but also in analysis of other 1D construction parts made of composite or uni-axially graded materials.

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.15-22
• /
• 2013

A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

• 식물조직배양학회지
• /
• 제28권4호
• /
• pp.215-219
• /
• 2001

팔레높시스 대량생산시 PLB 증식에 미치는 배지와 배양환경에 대해 조사하였다. PLB 증식량은 MS배지에서 높았지만, 증식된 PLB상태는 NDM배지가 더욱 양호하였다 천연첨가 물인 CW 10% 또는 사과와 감자의 사용은 PLB 증식효율을 향상시키는 데 필수적이었다. 배지내 지지물에 따른 PLB 증신률은 gelrite가 첨가된 고체배지가 흰색과 분홍색계통 모두 액체탈지면 배지보다 증식이 양호하였다. PLB 증식시 적정 sucrose 농도는 10g/L이며 농도가 높아질수록 PLB가 유식물체로 재분화되었고 저농도 일수록 증식과 유식물체의 재분화가 모두 억제되었다. PLB증식을 위한 적정 PPF와 온도는 각각 14.3 $\mu$mol.s$^{-1}$m$^{-2}$ , $25^{\circ}C$이었다.

• 한국산학기술학회논문지
• /
• 제6권4호
• /
• pp.342-348
• /
• 2005

본 연구에서는 음식물쓰레기 중의 단백질 분해활성을 갖는 대사산물을 생산하는 신규 바실러스 속 PNV-1 균주를 분리하였고, 분리된 균주를 이용하여 한국형 음식물쓰레기 환경인 고염분, 극한 pH, 고농도의 미생물 생육 저해물질 등에 대한 내성정도를 측정하였다. 실험 결과, 분리된 바실러스 속 균주는 약 0.68 unit/ml 이상의 높은 단백질분해효소 활성을 보유하고 있으며, 음식물쓰레기 중에 형성되는 pH 4 내지 9 범위에서 생육이 가능하고, 염분농도 최고 $8\%$와 살균작용을 하는 것으로 알려진 고춧가루 $5\%$에서도 생육에 거의 영향이 없었다. 또한, 미생물 생육 저해물질로 알려진 후추와 겨자에 대한 내성을 나타내었다.