• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.1
• /
• pp.64-75
• /
• 2009

The shipbuilder's requirement for a higher power output rating has led to the development of a super large two stroke low speed diesel engines. Usually a large-sized bore engine ranging from $8{\sim}14$ cylinders, this engine group is capable of delivering power output of more than 100,000 bhp at maximum continuous rating(mcr). Other positive aspects of this engine type include higher thermal efficiency, reliability, durability and mobility. This plays a vital role in meeting the propulsion requirement of vessels, specifically for large container ships, of which speed is a primary concern to become more competitive. Consequently, this also resulted in the modification of engine parameters and new component designs to meet the consequential higher mean effective pressure and higher maximum combustion pressure. Even though the fundamental excitation mechanisms unchanged, torsional vibration stresses in the propulsion shafting are subsequently perceived to be higher. As such, one important viewpoint in the initial engine design is the resulting vibration characteristic expected to prevail on the propulsion shafting system(PSS). This paper investigated the torsional vibration characteristics of these super large engines. For the two node torsional vibration with a nodal point on the crankshaft, a tuning damper is necessary to reduce the torsional stresses on the crankshaft. Hence, the tuning torsional vibration damper design and compatibility to the shafting system was similarly reviewed and analyzed.

• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.17-29
• /
• 1983

The milling process is considered as causing one of the greatest grain losses among all the processes in rice post-production. Major source of grain losses in the rice milling is considered as the whitening process. This study was attempted to develop an abrasive-type whitener, the whitening chamber of which being supplied by jet-air evenly and continuously. To investigate the milling performance by the new whitener, three kind of emery-stone grit(#36, #41, and #46), and three levels of rotational speed of emery stone roller (950, 1070, and 1200 rpm) were tested. The jet-air abrasive-type whitener was also compared with the conventional abrasive-type having no jet-air blower in terms of their milling performance. In addition, the effect of different combinations of sequential uses of the abrasive- and friction-type whiteners on the milling performance was also experimentally evaluated. The results of this study are summarized as follows; 1. In general, the whitening system combined with the abrasive type whitener with jet-air supply, which was newly designed, and the existing jet-air friction type whiteners produces more milled- and head-rice by about 0.3% points and 2.8% points, respectively than the system combined with the existing abrasive type without the jet-air supply under the same operational conditions. The former also consumed less electricity by 0.024 KwH per 100kg of milled rice production and gave more milling capacity by about 35 kg/hr. As compared with the conventional whitening system consisting of jet-air friction type whiteners only, the former yielded more milled- and head-rice by 1.5% points and 4.4% points, respectively. 2. The abrasive roller having 46 grit emery was better than the roller having 36 grit in aspects of milling performance and machine efficiency, in general. 3. With regard to the effect of combination method of abrasive type and friction type whiteners, one pass in abrasive type plus three passes in friction type gave better milling performance and energy efficiency than the two passes in abrasive type plus two passes in friction type regardless of the designs of the emery stone rollers. 4. The increase in rotational speed of the emery stone roller from 950 rpm to 1200 rpm presented negative effects on milled and head-rice yields and machine efficiency, but slightly positive effect on milling capacity.

• Science of Emotion and Sensibility
• /
• v.9 no.2
• /
• pp.141-150
• /
• 2006

Since the late 1990s, 'smart clothing' has been developed in a various way to meet the need of users and to help people more friendly interact with computers through its various designs. Recently, various applications of smart clothing concept have been presented by researchers. Among the various applications, smart clothing with a health care system is most likely to gain the highest demand rate in the market. Among them, smart clothing for check-up of health status with its sensors is expected to sell better than other types of smart clothing on the market. Under this circumstance, research and development for this field have been accelerated furthermore. This research institution has invented biometric sensors suitable for the smart clothing, and has developed a design to diagnose various diseases such as cardiac disorder and respiratory diseases. The newly developed smart clothing in this study looks similar to the previous inventions, but people can feel more comfortable in it with its fabric interaction built in it. When people wear it, the health status of the wearers is diagnosed and its signals are transmitted to the connected computer so the result can be easily monitored in real time. This smart clothing is a new kind of clothing as a supporting system for preventing various cardiac disorder and respiratory diseases using its biometric sensor built-in, and is also an archetype to show how smart clothing can work on the market.

• Archives of design research
• /
• v.2 no.1
• /
• pp.13-41
• /
• 1989

The raw materials for plant-stalk-folkcrafts are cultivated in the whole country. Most Korean farmers, to increase their income, have produced mats and containers with various plants as a side line from very long ago. At first, they began from the instruments of life and then made folkart and at last get to manu\ulcornerfacturing of industrial folk craft. The folkcrafts, made of plant-stalk, which could nor conform to changing society, are partly declined and partly handed down as the traditions. The social change today, however, makes living conditions more speedy and multisided, accordingly the characteristics of demand also become in\ulcornerdividual and various. While the demend is various like this, suppliers cannot answer demendants' requirements, and consequently, the demand and profit cannot be increased. According to this, the purpose of this study is set up to give an answer to the situation that is at the traditional standstill, through an examination of the motives. I. The crafts of plant-stalk are made only in an organized relationship between agriculture, industry and art as it is compounded art of gathering raw material, manufacturing, producing, improv\ulcornering design and production conditions. It may be possible that a farmer gathers material and weaves it manually but in others, it is im\ulcornerpossible to refine, bleach and dye because the process requires a professional industrial treatment. It is impossible to make art works to a farmer as every farner does not always have aesthetic sense. Though a farmer or producer has these all abilities, it is not desirable to him from economical view. 2. The development or improvement is essential in many sides but the most important thing seems to he in design. According to reports, it is, howevt!r, fact that the crafts improved in design of existing works have more expanded the sales than newly developed works. Therefore, ir appears advisable to improve designs of existing things positively as they have merit of occupying a position already, but on the other hand, new crafts have to be also developed and the producer should grasp the proper time. 3. Building up an industrial complex to improve design with collecting the producing districts for this works scattered allover the country is very desirable for speedy communication, intensive educa\ulcorner tion or training, and effective guidance. 4. In producing for export abroad, before everything, must know the life environment, custom! and manners, main thought of the country, and then produce according to these. S. The crafts of plant-stalk are the fIrst industry in present but in the futher it should change intc second or third industry. 6. A synethetic organization for supporting side line should be established for effectiveness, and experts have to be secured and also the educational-industrial complex and activation of study should be preceded.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.3
• /
• pp.35-47
• /
• 1996

A surface panel method treating a boundary-value problem of the Dirichlet type is presented to design a three dimensional body with free surface corresponding to a prescribed pressure distribution. An integral equation is derived from Green's theorem, giving a relation between total potential of known strength and the unknown local flux. Upon discretization, a system of linear simultaneous equations is formed including free surface boundary condition and is solved for an assumed geometry. The pseudo local flux, present due to the incorrect positioning of the assumed geometry, plays a role f the geometry corrector, with which the new geometry is computed for the next iteration. Sample designs for submerged spheroids and Wigley hull and carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. For the calculation of the wave resistance, normal dipoles and Rankine sources are distributed on the body surface and Rankine sources on the free surface. The free surface boundary condition is linearized with respect to the oncoming flow. Four-points upwind finite difference scheme is used to compute the free surface boundary condition. A hyperboloidal panel is adopted to represent the hull surface, which can compensate the defects of the low-order panel method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but by experiment.

• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.281-286
• /
• 2018

In recent days, when the development in smartphones has made it common to operate objects by using them, this study aimed to present a guideline for the UI/UX designs for applications which are necessary for operating various objects through the wireless communication technology. To suggest the application guideline, existing object control application case studies were analyzed, and based on this investigation the object control application UI/UX design guidelines were proposed. This study classified the types of wireless connections used by smartphones (LTE, Wi-Fi, Bluetooth, NCF, RFID) and analyzed the necessary design factors for operating objects by each type. Based on such analysis, this study presented the design sequence, factors, and methods for the UI/UX guidelines of applications. First, the method of connection was selected; second, the control device was selected. This new direction for designing smartphone applications for operating objects will likely help systemize the design process and enable the user to operate the object more intuitively. In future research, case studies will be designed applying the guidelines suggested from this study.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.603-612
• /
• 2012

When it comes to a country's traditional ideas. that country's geographic setting and religious thought show the people's consciousness, and the characteristics of historic sites and relics show their cultural aspects. Our country has 5000-year cultural history. Especially, the Baekje cultural history created very remarkable relics in our history. With regard to Baekje's own patterns and workmanship, their ornaments were more focused on the beauty of soft and voluptuous curves than that of Goguryeo and Silla This study researched design characteristics of ornaments and symbolic aspects of the patterns by focusing on crowns, crowns' accessories, earrings, necklaces, chignon ornaments of the Baekje's ornaments, To put emphasis on Baekje's ornaments by comparing Baekje's ornaments with Goguryeo's and Silla's. This study collected data on Baekje's ornaments, and reviewed domestic references and specialty publications at the Buyeo National Museum, Gong-ju National Museum, home and abroad, and studied the images of Baekje's metal crafts and patterns through theses. Baekje had splendid and glorious artistic culture, but there are not many historical data and supportive relics left these days. Therefore, a lot of attention, researches and development on Baekje culture are needed. This study found that the ornaments of the Baekje era have not only ornament functions but also the people's creative mind. The culture contents in recent technological development and industrialization change people's recognition, and now they have interest in Baekje culture. Therefore, the purpose of this study is to widely popularize Baekje by studying the patterns of the Baekje era more and developing various and new designs.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.13-20
• /
• 2017

Soil nailing is ground reinforcement method using the shear strength of ground and the pullout shear resistance force of nail. It is mainly used for reinforcement of cut slopes, earth retaining structures and retaining walls, etc. It may be designed considering the pullout resistance of nail in the case of earth retaining structure and retaining wall, but it should be designed considering not only pullout resistance but also shear and bending resistance in the case of slope. However, conservative designs considering only pullout resistance are being done and most of the studies are about increasing pullout resistance by improving of material, shape and construction method of nail. Actually, Shear bending deformations occur centering on the active surface in ground reinforced with the nail. The grout with relatively low strength is destroyed and separated from the reinforcing material. As a result, the ground is collapsed while reducing the frictional resistance rapidly. Therefore, it is necessary to develop the method to increase the shear resistance while preventing separation of nail and grout body. In this study, an experimental study was conducted on new soil nailing method which can increase shear resistance by forming protrusions through pressurized grouting after installing a packer on the outside of deformed bar.

• Korean Journal of Acupuncture
• /
• v.27 no.3
• /
• pp.1-23
• /
• 2010

Objectives and methods : The Standards for Reporting Interventions in Clinical Trials of Acupuncture (STRICTA) were published in five journals in 2001 and 2002. These guidelines, in the form of a checklist and explanations for use by authors and journal editors, were designed to improve reporting of acupuncture trials, particularly the interventions, thereby facilitating their interpretation and replication. Subsequent reviews of the application and impact of STRICTA have highlighted the value of STRICTA as well as scope for improvements and revision. To manage the revision process a collaboration between the STRICTA Group, the CONSORT Group, and the Chinese Cochrane Centre was developed in 2008. An expert panel with 47 participants was convened that provided electronic feedback on a revised draft of the checklist. At a subsequent face-to-face meeting in Freiburg, a group of 21 participants further revised the STRICTA checklist and planned dissemination. Results : The new STRICTA checklist, which is an official extension of CONSORT, includes six items and 17 sub-items. These set out reporting guidelines for the acupuncture rationale, the details of needling, the treatment regimen, other components of treatment, the practitioner background, and the control or comparator interventions. In addition, and as part of this revision process, the explanations for each item have been elaborated, and examples of good reporting for each item are provided. In addition, the word "controlled" in STRICTA is replaced by "clinical", to indicate that STRICTA is applicable to a broad range of clinical evaluation designs, including uncontrolled outcome studies and case reports. Conclusions : It is intended that the revised STRICTA, in conjunction with both the main CONSORT Statement and extension for nonpharmacologic treatment, will raise the quality of reporting of clinical trials of acupuncture.

• Archives of design research
• /
• v.15 no.2
• /
• pp.213-222
• /
• 2002

A transfer paper, is needed in the third firing, is usually utilized for industrial ceramics in order to produce tablewares or promoting products. Products may have the same form, however; the price might be different by what kinds of design have transferred. We need to fully understand these methods in order to create high value and quality. Remodeling, the so-called second architecture, results from social Needs for renovation of structures and changing functions. Tile satisfying the need for a custom-made design which fits the features of a space. Most importantly, the remodeler must make an individual design ordered for the customer with an emphasis on economy and time efficiency. Tiles currently in the market are mass-produced using an automated system with a high-priced mold. It is difficult to find tiles of distinct design that are made in a small quantity. We need to develop a method for making various kinds of tile designs that would be marketed for the remodeling industry. In this study, after designing a certain wall with the tiffs in the space, 1 will talk about developing a method to make transfer paper to produce individual tiles for the space. 1 hope that the functional and aesthetic effect on remodeling will gain in popularity, and that we will foster a new demand for tiles in harmony with the other materials mentioned in this study.