• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.765-768
• /
• 2002

This study focuses on designing a new gluing system for the FM-I (Freeform Master I), which is a new rapid prototyping machine using a sheet lamination technique. To design the system, we firstly verify the required parameters of the proposed gluing system. Then we analyze the electro-magnetic system by using ANSYS and the mechanical system by using numerical methods. The gluing system can contribute to reduce the cost of the machine since it can be applied to low cost materials such as a plain paper.

• 태양에너지
• /
• 제18권3호
• /
• pp.9-14
• /
• 1998

The present solar energy concentrator is a 2-dimensional system that incorporates with a tubular absorber. A new design theory is developed on the basis of the generalized edge-ray principle. The result shows the increase of concentration ratio for the same acceptance angle as the basic CPC by a factor of $C_{new}=C_{cpc}\{1+(d/{\pi}r)\;sin^2{\theta}_c\}$. For example, if ${\theta}_c=30^{\circ}$, the new design offers the concentration of $2.0{\sim}2.72$, whereas $C_{cpc}=2$. The new system also provide a thin and light-weight design.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.279-285
• /
• 2006

Recirculation for the unreacted fuel is necessary to improve the overall efficiency of the fuel cell system and to prevent fuel starvation since the fuel cell for a vehicle application is a closed system. In case of the automotive fuel cell, the ejector which does not require any parasitic power is good for the performance improvement and easy operation. It is essential to design the customized ejector due to the lack of the commercial ejector corresponding to the operating conditions of the fuel cell systems. In this study, the design methodology for the ejector customized to an automotive fuel cell is proposed. The model based sensitivity analysis prevents the time-consuming redesign and reduces the cost of developing ejector. As a result, the customized ejector to meet the desired performance within overall operating range has developed for the PEMFC automotive system.

• International Journal of Safety
• /
• 제9권2호
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.425-428
• /
• 1998

This paper proposes a new fuzzy controller using variable structure control theory. In this paper, after the time-varying fuzzy sliding surface is designed, the fuzzy rules are defined based on the variable structure control theory. This design method makes the fuzzy controller design more structured and can guarantee the stability and robustness of the fuzzy controller and overcome the shortcoming of the variable structure system. Through computer simulation and experiment of nonlinear inverted pendulum system, this thesis demonstrate that system has the robustness against disturbance and modelling error, and the tracking performance of it is improved.

• 디자인학연구
• /
• 제19권3호
• /
• pp.45-58
• /
• 2006

Design policy in Korea has been dealt as one of the industrial policies in economic policies, and it can be classified as government driven. A problem derived from this is that previous design policies have only pursued creating material values, and have overlooked the emotional values of design, such as creating cultural identity of Korea and cultural independence through it. Therefore, a new mindset of 'Cultural Era of Design' and a new role of 'Designers as Producers of Culture' must be in the strategy and system for supporting the design in Korea. This study can be divided into three major parts. First part compares and examines current design policies of Korea to seek more suitable design policies. Second part suggests a new direction for design policy by analyzing the ideas and cases of such policies. Third part surveys designers and people in related fields to collect opinions about design policies in Korea to propose directions for new design policies and ways to evaluate them. The object of this process is to find out how they, in the center of design and cultural industries, see and follow the policies. It will aid the narrowing of perceptual gap between them and the developers of policies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.175-183
• /
• 2008

In this paper, a new in-pipe inspection robot was developed for inspecting a large number of circular pipe insides of the sea plant, ships, and buildings. A new pressure generation system was devised to inspect circular pipes with different diameters and to move up and down slant or perpendicular slopes inside of the pipe. Also, a design method was analyzed to decide the capacity of driving motor for the robot if the mass and maximum velocity of the robot are identified. According to the design specification, a robot was developed and was tested to verify the performance of the pressure generation system. For tests, a control system was developed.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.258-269
• /
• 2022

In these days, innovative functions are required to unmanned parcel delivery lockers. As non-face-to-face transactions become the center due to the recent COVID-19 pandemic, many problem occurs in society such as theft crimes and lack of loading space. Therefore, New concept storage device is developed in korea. It has the functions that minimizes empty spaces by using the internal transport device to enable efficient space loading and refrigerate goods such as foods. In order to systematically approach the system design of the unmanned parcel delivery lockers which is the new function is applied, We applied model-based system engineering to improve the development efficiency and use a system modeling language to express the system. We conducted interworking research of CAD data including system modeling and design data. it is expected that this method will increase the effective development efficiency such as maintenance traceability and reduction of development period and cost.

• 국제초고층학회논문집
• /
• 제5권4호
• /
• pp.251-262
• /
• 2016

Tall Buildings have been one of the most prominent symbols of economic growth for nearly a century. Yet, in the aftermath of the tragedies of September 11, "signature" Tall buildings have become the focus of much debate. The structural systems today are undergoing a major evolution to address the ability of providing flexibility in the design and use of the building together with sustainability (Green) and cost-effective system. This paper describes a new invented structural system, evolutionary structural analysis and design of Tall buildings, which involves the entire analysis process, including conceptual and design stages and comparison with the existing Tall building. This study presents an new innovative structural system, Beehive (Hexagrid), for Tall buildings. The final results are achieved by modeling an 80 story Tall building with the optimized angle and topology of hexagon members by using a computer analysis, ETABS finite element analysis. The objective function of this system is to use one structural system in order to both maximize Eigen frequency for resisting dynamic responses and minimize mean compliance for static responses. Finite element analysis is carried out by using standardized materials. Optimal Hexagrid topologies with the highest stiffness are finally determined to resist both static and dynamic behaviors. Holistic design integration approaches between structures and facades to save energy for environmental control are studied. Innovative design ideas to control structural motion as well as to utilize that motion to harness energy are discussed. Considering abundant emergence of tall buildings all over the world in recent years, the importance of the studies presented in this paper cannot be overemphasized for constructing more sustainable built environments.

• 한국실내디자인학회논문집
• /
• 제22권5호
• /
• pp.367-375
• /
• 2013

Using the 'New material' concept has recently been introduced into the natural characteristics. In the course of such a, Janine M. Benyus has proposed to mimic the characteristics of natural ecosystems to mention the concept of Biomimicry. Process made engineered using technical elements for representing the material properties of Biomimicry such will be acting importantly, This study intends to analyze how new materials applied to 'Biomimicry' characteristics are processed in space. The results were as follows : 1) Processing methods of new materials resulted as 'Forming', 'Surface treatment', 'Bonding', 'Inserting'. These four were divided and analyzed into 'Form', 'System', 'Adaptation'. As a result of this analysis, such significances were shown as 'Forming/Surface treatment/Bonding' in 'Form', 'Bonding' in 'System' and 'Adaptation'. 2) 'Bonding' applied to 'System' of new material can be recycled to be combined with other materials through the existing adhesive material, and present as a solution of 'Sustainable development'. 3) 'Bonding' applied to 'Adaptation' of new material is to impart the ability to react to the environment through the joint, but is characteristic, at this time, using digital and other field technology. It appeared primarily that it can be known to meet the social trends and convergence between fields. Thus, as the finish that are friendly to the environment from the interior design, the results of the study are expected to be utilized in the study of new materials guidelines.