• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2009

This paper investigates inelastic lateral-torsional buckling of stepped beams subjected to uniformly distributed load and end moments. A three-dimensional finite-element program ABAQUS (2007) and a regression program MINITAB(2006) were used to analytically develop new design equation for singly and doubly stepped beams with simple boundary condition. The flanges of the smaller cross-section in the stepped beams were fixed at 30.48 by 2.54 cm, whereas the width and thickness of the flanges of the larger cross-section varied. The web thickness and height of the beams were kept at 1.65 cm and 88.9 cm, respectively. The ratios of the flange thickness, flange width, and stepped length of beam are considered with analytical parameters. Two groups of 27 cases and 36 cases, respectively, were analyzed for doubly and singly stepped beams in the inelastic buckling range. The combined effects of residual stresses and geometrical imperfection on inelastic lateral-torsional buckling of beams are considered. The distributions of residual stress of the cross-section is same as shown in Pi and Trahair (1995) and the initial geometric imperfection of the beam is set by central displacement equal to 0.1% of the unbraced length of beam. The comparisons between results from proposed equations and the results from finite element analyses were presented in this paper. The maximum differences of two results are of 13% for the doubly stepped beam and 10% for the singly stepped beam. The proposed equations definitely improve current design methods for the inelastic lateral-torsional buckling problem and increase efficiency in building and bridge design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.301-306
• /
• 2016

In bridge performance assessments, a new load carrying capacity evaluation model of simple bridges was proposed, which is based on the developed simple support impact factor spectrum. In this paper, a conservative assumption that the inner span with the both ends fixed boundary condition is ideal for applying the impact factor response spectrum for continuous bridges. The impact factor response spectrum has been proposed based on this assumption. The response spectrum by comparing the numerical analysis result and actual measurement data verified the applicability. The analysis was loading the moving load of DB-24 in a six-span continuous bridge, which was the same as the actual measurement data, the dynamic response was measured in the fourth span. The frequency of the bridge was obtained by FFT on the acceleration response and the span-frequency of sample bridge was calculated by the frequency. The impact factor of the sample bridge was determined by applying the span-frequency of the bridge to the proposed response spectrum; it was similar to the result of comparing the actual measured impact factor. Therefore, the method using the impact factor response spectrum based on the frequency response of both ends-fixed beam was found to be applicable to an actual continuous bridge.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.137-147
• /
• 2013

In this paper, an 1.2V 8b 1GS/s A/D Converter(ADC) based on a folding architecture with a resistive interpolation technique is described. In order to overcome the asymmetrical boundary-condition error of conventional folding ADCs, a novel scheme with an odd number of folding blocks and a fractional folding rate are proposed. Further, a new digital encoding technique with an arithmetic adder is described to implement the proposed fractional folding technique. The proposed ADC employs an iterating offset self-calibration technique and a digital error correction circuit to minimize device mismatch and external noise The chip has been fabricated with a 1.2V 0.13um 1-poly 6-metal CMOS technology. The effective chip area is $2.1mm^2$ (ADC core : $1.4mm^2$, calibration engine : $0.7mm^2$) and the power dissipation is about 350mW including calibration engine at 1.2V power supply. The measured result of SNDR is 46.22dB, when Fin = 10MHz at Fs = 1GHz. Both the INL and DNL are within 1LSB with the self-calibration circuit.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.221-231
• /
• 2011

Thinner and lighter structural members can be designed by utilizing the high stiffness and toughness, and high compressive strength of UHPC(ultra high performance concrete), which reaches up to 200MPa. The punching shear capacity of UHPC was investigated in this paper aiming for the application of UHPC to bridge decks. Six square slabs were fabricated and punching shear test was performed under fixed boundary condition. Different thicknesses of test slabs, which were 40mm and 70mm, were selected. The shape ratio of loading plates were ranged between 1.0~2.5. 40mm thickness slabs showed longer softening region after the peak load and, on the other hand, 70mm thickness slabs revealed a more brittle shear failure. Experimental results were analyzed using various existing punching shear predicting equations. Ductal$^{(R)}$ equation and JSCE equation better predicted for 40mm slabs, and Harajli et al. equation and ACI-Ductal$^{(R)}$ equation better suited for 70mm slabs. Nevertheless generally they didn't well predict the test results. A new punching shear equation which was derived based on the actual failure mechanism was proposed. The proposed equation appeared to better predict the punching shear strength of UHPC than other available equations.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.6 s.348
• /
• pp.9-17
• /
• 2006

We proposed a new High-speed CMOS Level Up/Down Shifter circuits that can be used with Dynamic Voltage and Frequency Scaling(DVFS) algorithm, for low power system in the SoC(System-on-Chip). This circuit used to interface between the other voltage levels in each CMOS circuit boundary, or between multiple core voltage levels in a system bus. Proposed circuit have advantage that decrease speed attenuation and duty ratio distortion problems for interface. The level up/down shifter of the proposed circuit designed that operated from multi core voltages$(0.6\sim1.6V)$ to used voltage level for each IP at the 500MHz input frequency The proposed circuit supports level up shifting from the input voltage levels, that are standard I/O voltages 1.8V, 2.5V, 3.3V, to multiple core voltage levels in between of $0.6V\sim1.6V$, that are used internally in the system. And level down shifter reverse operated at 1Ghz input frequency for same condition. Simulations results are shown to verify the proposed function by Hspice simulation, with $0.6V\sim1.6V$ CMOS Process, $0.13{\mu}m$ IBM CMOS Process and $0.65{\mu}m$ CMOS model parameters. Moreover, it is researched delay time, power dissipation and duty ration distortion of the output voltage witch is proportional to the operating frequency for the proposed circuit.

• The Journal of Fisheries Business Administration
• /
• v.35 no.1
• /
• pp.23-56
• /
• 2004

The offshore trawl fishery is seeking its survival way to overcome current management conditions in red, resulted from the bilateral agreement with China and Japan. However, this movement magnifies conflicts between fisheries on the contrary and it is thought to be impossible to get over current situations. For all that, this study is aimed at investigating how this current situations have occurred. The management freedom as response to the change in fishing conditions of a certain fishery, in case of Korea, is affected by institutional regulations. The example of this is controls on fishing gears, fishing vessels, and fishing grounds. The most exposure of this control is a segmentation of institutional fisheries. The initial segmentation of the offshore trawl fishery in Korea was occurred in the period of Japan's colonization when the degree of use of fishing grounds was limited geographically. At that time, fisheries were divided by fishing areas, but it did not divide the fishery itself. The large - sized fishing vessels were developed politically to be more competative to Japanese fishing vessels since 1950s. During this time, the trawl fishery was merged into current Eastern trawl fishery and South - Western trawl fishery. It was also inevitable to divide into the pair trawl and single trawl fishery as a result of the physical mergency between Western trawl and Southern trawl fishery. In order to develop the trawl fishery, new licenses were issued on the shrimp trawl fishery, through which it was expected to boost the trawl fishery. As opposed, the shrimp trawl fishery was changed into the mid - sized trawl fishery, targeting on the eastern fishing areas and the large - sized trawl fishery was developed since the late of 1970s with the development of filefish processing industry. The large trawl fishery that led in development of offshore trawl fishery since the late of 1950s was started to divide into a pair trawl and single trawl according to the fishing method and capital power. It finally became an institutionally independent fishery in 1980s, respectively. Looking into these historical process, the segmentation of the trawl fishery is thought as a result of the lack of long - term perspective and as a production of trial and error resulted by unprepared policy. As a result, these segmentation of fisheries roles as critical obstacles in harmonization of fisheries and in overcoming of current situations. Therefore, the review of this institutional segmentation of the offshore trawl fishery should be taken for an optimal redistribution of fishing grounds suits with business and fishing technology. For this, the fishery must be divided into large capitalized fishery and small - mid fishery with consideration of capital, fishing method, and the condition of use of fishing grounds. In addition to this, by limiting outline of fishing ground that the large fishery can harvest, it must allow for the small - mid fishery to catch with its own boundary. Furthermore, by launching buyback programs on the trawl, eastern trawl, pair trawl, it can provide broader fishing grounds where the fishery can harvest with management freedom.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.98-111
• /
• 2015

Urban environmental problems such as flooding, depletion of ground water, pollution of urban streams and the heat island effect caused by urban development and climate change can be mitigated by the improvement of the urban water cycle. For the effective planning of water cycle management it is necessary to establish aerial Hydrotope Maps, with which we can estimate the status and change of the water allowance for any site. The structure of the German water balance model BAGLUVA, which is based on soil and vegetation, was analyzed and the input data and boundary condition of the model was compared with Korean data and research results. The BAGLUVA Model consists of 5 Input categories (climate, land use, topography, soil hydrology and irrigation). The structure and interconnection of these categories are analyzed and new concepts and implementation methods of topographic factor, maximum evapotranspiration ratio, effective rooting depth and Bagrov n parameter was compared and analyzed. The relation of real evapotranspiration ($ET_a$)-maximum evapotranspiration ($ET_{max}$) - precipitation (P) was via Bagrov n factor represented. The aerial and land use oriented Hydrotope Map can help us to investigate the water balance of small catchment areas and to set goals for volume of rainwater management and LID facilities effectively in the city. Further, this map is a useful tool for implementing water resource management within landscape and urban planning.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.261-268
• /
• 2004

Osteoporosis is a clinical condition in which the amount of bone tissue is reduced and the likelihood of fracture is increased. It is known that the electrical property of the bone is related to its density, and, in particular, the electrical resistance of the bone decreases as the bone loss increases. This implies that the electrical property of bone may be an useful parameter to diagnose osteoporosis, provided that it can be readily measured. The study attempted to evaluate the electrical conductivity of bone using a technique of electrical impedance tomography (EIT). It nay not be easy in general to get an EIT for the bone due to the big difference (an order of 2) of electrical properties between the bone and the surrounding soft tissue. In the present study, we took an adaptive mesh regeneration technique originally developed for the detection of two phase boundaries and modified it to be able to reconstruct the electrical conductivity inside the boundary provided that the geometry of the boundary was given. Numerical simulation was carried out for a tibia phantom, circular cylindrical phantom (radius of 40 mm) inside of which there is an ellipsoidal homeogenous tibia bone (short and long radius are 17 mm and 15 mm, respectively) surrounded by the soft tissue. The bone was located in the 15 mm above from the center of the circular cross section of the phantom. The electrical conductivity of the soft tissue was set to be 4 mS/cm and varies from 0.01 to 1 ms/cm for the bone. The simulation considered measurement errors in order to look into its effects. The simulated results showed that, if the measurement error was maintained less than 5 %, the reconstructed electrical conductivity of the bone was within 10 % errors. The accuracy increased with the electrical conductivity of the bone, as expected. This indicates that the present technique provides more accurate information for osteoporotic bones. It should be noted that tile simulation is based on a simple two phase image for the bone and the surrounding soft tissue when its anatomical information is provided. Nevertheless, the study indicates the possibility that the EIT technique may be used as a new means to detect the bone loss leading to osteoporotic fractures.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.223-243
• /
• 1989

The practical application of modern space science and technology have resulted in many actual and potential gains of mankind. These successes have conditioned and increased the need for a viable space law regime and the challenge of space has ultimately led to the formation of an international legal regime for space. Space law is no longer a primitive law. It is a modern law. Yet, in its stages of growth, it has not reached the condition of perfection. Therefore, under the existing state of thing, we could carefully say that the space law is one of the most newest fields of jurisprudence despite the fact that no one has so far defined it perfectly. However, if space law can be a true jurisprudential entity, it must be definable. In defining the space law, first of all, the grasp of it's nature iis inevitable. Although space law encompasses many tenets and facets of other legal discriplines, its principal nature is public international law, because space law affects and effects law relating intercourse among nations. Since early 1960s when mankind was first able to flight and stay in outer space, the necessity to control and administrate the space activities of human beings has growingly increased. The leading law-formulating agency to this purpose is the United Nation's ad hoc Committee on Peaceful Uses of Outer Space("COPUOS"). COPUOS gave direction to public international space law by establishing the 1963 Declaration of Legal Principles Governing the Activities of the States in the Exploration and Use of Outer Space("1963 Declaration"). The 1963 Declaration is very foundation of the five international multilateral treaties that were established successively after the 1963 Declaration. The five treaties are as follows: 1) The Treaty on Principles Governing the Activities of States in the Exploration and Use of Outer Space including Moon and other Celestial Bodies, 1967. 2) The Agreement on the Rescue of Astronauts, the Return of Astronauts, and the Return of Objects Launched into Outer Space, 1968. 3) The Convention on International Liability for Damage Caused by Space Objects, 1972. 4) The Convention on Registration of Objects Launched into Outer Space, 1974. 5) The Agreement Governing Activities of States on the Moon and Other Celestial Bodies: Moon Treaty, 1979. The other face of space law is it's commercial aspect. Space is no longer the sole domination of governments. Many private enterprise have already moved directly or indirectly into space activities in the parts such as telecommunications and space manufacturing. Since space law as the public international law has already advanced in accordance with the developments of space science and technology, there left only a few areas untouched in this field of law. Therefore the possibility of rapid growth of space law is expected in the parts of commerical space law, as it is, at this time, in a nascent state. The resources of the space environment are also commercially both valuable and important since the resources include the tangible natural resources to be found on the moon and other celestial bodies. Other space-based resources are solar energy, geostationary and geosynchronous orbital positions, radio frequencies, area possibly suited to human habitations, all areas and materials lending themselves to scientific research and inquiry. Remote sensing, space manufacturing and space transportation services are also another potential areas in which commercial. endeavors of Mankind can be carried out. In this regard, space insurance is also one of the most important devices allowing mankind to proceed with commercial space venture. Thus, knowlege of how space insurance came into existence and what it covers is necessary to understand the legal issues peculiar to space law. As a conclusion the writer emphasized the international cooperation of all nations in space activities of mankind, because space commerce, by its nature, will give rise many legal issues of international scope and concern. Important national and world-community interests would be served over time through the acceptance of new international agreements relating to remote sencing, direct television broadcasting, the use of nuclear power sources in space, the regularization of the activities of space transportation systems. standards respecting contamination and pollution, and a practical boundary between outer space and air space. If space activity regulation does not move beyond the national level, the peaceful exploration of space for all mankind will not be realized. For the efficient regulation on private and governmental space activities, the creation of an international space agency, similar to the International Civil Aviation Organization but modified to meet the needs of space technology, will be required. But prior to creation of an international organization, it will be necessary to establish, at national level, the Office of Air and Space Bureau, which will administrate liscence liscence application process, safety review and sale of launch equipment, and will carry out launch service.