• 제목/요약/키워드: neutral variation

검색결과 196건 처리시간 0.028초

고강도 콘크리트의 부착거동에 관한 실험적 연구 (The Experimental Study on the Bond behavior of High strength concrete)

  • 이준구;김우;박광수;김대중;이응찬;김한중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.774-780
    • /
    • 1999
  • The study of bond behavior between concrete and rebar has been performed for a long time. On this study, we tried to analysed variation of bond behaviors quantitatively with varying the strength of concrete. Bond stress which observed below the neutral surface of beam and at connecting part of beam and column is affected by various bond parameters. Resistance of deformed bars which embedded in concrete to the pullout force is divided 1) chemical adhesive force 2) frictional force 3) mechanical resistance of ribs to the concrete and these horizontal components of resistance is being bond strength. We selected the most common and typical variable which is concrete strength among various variables. So we used two kinds of concrete strength like as 25MPa(NSC) and 65MPa(HSC). Tension Test was performed to verify how bond behavior varied with two kinds of concrete strength. Concentration of bond stress was observed at load-end commonly in Tension Test of the initial load stage. At this stage stress distribution was almost coincident at each strength. As tension load added, this stress distribution had difference gradually and movement of pick point of bond stress to free-end and central section was observed. This tendency was observed at first and moving speed was more fast in NSC. At the preceeding result the reason of this phenomenon is considered to discretion of chemical adhesion and local failure of concrete around rebar in load-end direction. Especially, when concrete strength was increased 2.6 times in tension test, ultimate bond strength was increased 1.45 times. In most recent used building codes, bond strength is proportioned to sqare root of concrete compressive strength but comparison of normalized ultimate bond strength was considered that the higher concrete strength is, the lower safety factor of bond strength is in each strength if we use existing building codes. In Tension Test, in case of initial tensile force state, steel tensile stress of central cross section is not different greatly at each strength but tensile force increasing, that of central cross section in NSC was increased remarkably. Namely, tensile force which was shared in concrete in HSC was far greater than that of concrete in NSC at central section.

  • PDF

마그네시아-인산칼륨 시멘트에 대한 인산염 비 및 물-결합재비의 영향 (Effect of Phosphate-to-binder and Water-to-binder Ratio on Magnesia-potassium Phosphate Cement)

  • 이경호;윤현섭;양근혁
    • 콘크리트학회논문집
    • /
    • 제29권3호
    • /
    • pp.275-281
    • /
    • 2017
  • 본 연구는 물-결합재비(water-to-binder ratio, W/B) 및 인산염-결합재비(phosphate-to-binder ratio, P/B)가 마그네시아-인산칼륨 시멘트(magnesium-potassium phosphate cement, MKPC) 모르타르의 플로, 응결시간, 압축강도발현 및 pH 변화에 미치는 영향성에 대한 평가이다. MKPC 모르타르의 P/B가 0.3 및 0.5일 때 W/B 범위 20~40%에 대하여 10 배합의 모르타르 실험을 실시하였으며, X-선 회절 분석(X-ray diffraction, XRD), 전자현미경(scanning electron microscope, SEM) 및 수은압입법(mercury intrusion porosimetry, MIP) 분석을 위해 MKPC의 반응생성물 및 미세공극분포를 평가하였다. 실험결과, MKPC 모르타르의 플로 및 응결시간은 P/B의 증가에 따라 감소하였으며, P/B가 0.3에서 0.5로 증가함에 따라 종결시간은 약 24% 감소하였다. MKPC 모르타르의 초기 압축강도 발현 기울기의 경우 콘크리트 구조기준에서 제시하는 시멘트 콘크리트 대비 높은 수준에 있었다. 재령 28일의 압축강도 30 MPa 이상 및 pH 9.0 이하를 만족하기 위해 MKPC 모르타르의 P/B 및 W/B는 각각 0.5이상 및 30% 이하가 추천된다. MKPC의 반응생성물인 스트루바이트(struvite)-K의 결정은 MKPC의 P/B 및 W/B가 높을수록 증가하였는데, 이로 인해 거대 모세관 공극은 감소하였다.

Surface Chemical Aspects of Coagulation, Deposition, and Filtration Processes: Variation of Electrokinetic Potential at Metal Oxide-Water and Organic-Water Interfaces in the $Na^+$ and $Ca^{2+}$ Ion Solutions

  • Kim, Sung-Jae
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제4권3호
    • /
    • pp.173-183
    • /
    • 2000
  • This study measured the zeta potential of both latex colloidal particles with carboxylate surface groups and glass beads (collectors) with silanol surface group employing various solution with different chemical characteristics. The results have been compared with the surface chemistry theory. The zeta potential of the particle and collector increased with increasing pH up to 5.0 regardless of the solution chemistry. For a monovalent electrolyte solution(sodium chloride solution) the zeta potential steadily increased until the pH reached 9.5. In contrast, little change in zeta potential was made between 5.0 and 9.5 for a divalent electrolyte solution (sodium chloride solution) the zeta potential steadily increased until the pH reached 9.5. In contrast, little change in zeta potential was made between 5.0 and 9.5 for a divalent electrolyte solution (calcium chloride solution). In other words, the more the pH decreases, the larger the effect of neutral salts, such as NaCl and CaCl$_2$, have on the ζ-potential values. In this study, the PZPC(point of zero proton condition) of the particle and collector occurred below a pH of 3.1, H(sup)+ and OH(sup)- acted as a PDI (potential determining ion), and Na(sup)+ acted as an IDI(indifferent ion). The magnitude of the negative ζ-potential values of the particle and collector monotonically increased as the concentrations of Na(sup)+ or Ca(sup)2+([Na(sup)+] or [Ca(sup)2+]) decreased (the values of pNa or pCa increased). In the case of latex particles, the ζ-potential should aproach zero (isoelectric point; IEP) asymptotically as the pNa approaches zero, while in the case of calcium chloride electrolyte, ζ-potential reversal may be expected to occur around 3.16$\times$10(sup)-2MCaCl$_2$(pCa=1.5). pH, valance and ionic strength can be used in various ways to improve the water treatment efficiency by modifying the charge characteristics of the particle and collector. Predictive capability is far less certain when EDL(electrical double layer) repulsive forces exist between the particle and collector.

  • PDF

주요 대두품종의 생태적 특성에 관한 연구 제2보 일장조건이 개화 및 제특성에 미치는 영향 (Studies on Eeological characteristies of Some Soybean (Glycine max(L.) Merr) Cultivars 2. Effects of Day Length on Flowering and Other Agronomic Characteristics)

  • 최경구;김진기;이성춘;이왕휴;전병기
    • 한국작물학회지
    • /
    • 제25권4호
    • /
    • pp.59-65
    • /
    • 1980
  • 광지역성 품종의 육종소재인 일장둔감형 품종의 선발 가능성과 이에 관한 기초자료를 얻고저 국내외 주요 대두 55품종에 단일처리를 하여 개화 및 몇가지 주요 형질에 미치는 영향을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 개화일수는 단일에 의해 감소하는 경향이었으며 단축정도는 만생종에서 컸고 조생종에서 작았다. 2. 전 공시품종을 개화촉진 정도에 의해 일장감응성 정도를 고, 중 저로 유별하여 보면 다음과 같다. 1) 일장감응성이 낮은 품종군 : 성안, Gembokin, Harosoy, Wayne, Wirth, Elton 및 Pi-54613 2) 일장감응성이 중정도인 품종군 : 수도 47호, 수원 5001, 수원 6001, 수원 8002, 수원 8003, 수원 8006, 수원 9003, 봉의, 충북황 001, 익산, 광묘, 광교, 서천백묘 및 만주대, SS-74185(이상 15품종은 국내종), Akita, Chogyemyungtae, Fusimusume, Norm 2, Kirin 5, Kokamedaizu, 육우 003, 동산 6001, 동산 69호, 동산 7003, Yougoro, Karasumame 및 은대묘(이상 13품종은 일본종), H-25, Williams, Ao - 7445, Rolsoy, Roe, Kobuleko, Norredo, Manchuria, Shih-Shih, Viking, Columbus, Pi-31408, Pi-68552 및 Pi-15243(이상 14품종은 미국 및 기타종) 3) 일장감응성이 높은 품종군 :수원 7003, 수원 80호, 수원 8005, 강림, 백천 및 Hill 3. 전 공시품종율 Gembokin, Wayne, Wirth 및 Pi-54613은 개화반응에 일장의 영향을 전혀받지 않는 일장둔감형 품종이였다. 4. 기장, 기직경, 절수, 분지수, 1주래수 및 1주입수 등은 단일에서 감소하고 장일에서 증가하는 경향이었다. 그러나 Gembokin, Wayne, Wirth 및 Pi-54613과 같은 일장둔감형 품종은 일장에 의한 형태적 특성의 변이도 비교적 적었다.

  • PDF

Effect of Simulated Heat Stress on Digestibility, Methane Emission and Metabolic Adaptability in Crossbred Cattle

  • Yadav, Brijesh;Singh, Gyanendra;Wankar, Alok;Dutta, N.;Chaturvedi, V.B.;Verma, Med Ram
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권11호
    • /
    • pp.1585-1592
    • /
    • 2016
  • The present experiment was conducted to evaluate the effect of simulated heat stress on digestibility and methane ($CH_4$) emission. Four non-lactating crossbred cattle were exposed to $25^{\circ}C$, $30^{\circ}C$, $35^{\circ}C$, and $40^{\circ}C$ temperature with a relative humidity of 40% to 50% in a climatic chamber from 10:00 hours to 15:00 hours every day for 27 days. The physiological responses were recorded at 15:00 hours every day. The blood samples were collected at 15:00 hours on 1st, 6th, 11th, 16th, and 21st days and serum was collected for biochemical analysis. After 21 days, fecal and feed samples were collected continuously for six days for the estimation of digestibility. In the last 48 hours gas samples were collected continuously to estimate $CH_4$ emission. Heat stress in experimental animals at $35^{\circ}C$ and $40^{\circ}C$ was evident from an alteration (p<0.05) in rectal temperature, respiratory rate, pulse rate, water intake and serum thyroxin levels. The serum lactate dehydrogenase, aspartate aminotransferase, alanine aminotransferase, alkaline phosphatase activity and protein, urea, creatinine and triglyceride concentration changed (p<0.05), and body weight of the animals decreased (p<0.05) after temperature exposure at $40^{\circ}C$. The dry matter intake (DMI) was lower (p<0.05) at $40^{\circ}C$ exposure. The dry matter and neutral detergent fibre digestibilities were higher (p<0.05) at $35^{\circ}C$ compared to $25^{\circ}C$ and $30^{\circ}C$ exposure whereas, organic matter (OM) and acid detergent fibre digestibilities were higher (p<0.05) at $35^{\circ}C$ than $40^{\circ}C$ thermal exposure. The $CH_4$ emission/kg DMI and organic matter intake (OMI) declined (p<0.05) with increase in exposure temperature and reached its lowest levels at $40^{\circ}C$. It can be concluded from the present study that the digestibility and $CH_4$ emission were affected by intensity of heat stress. Further studies are necessary with respect to ruminal microbial changes to justify the variation in the digestibility and $CH_4$ emission during differential heat stress.

밀가루 및 건면의 지방질 조성과 측정 방법에 따른 조지방 함량 차이 (Lipid Composition and Differences in Crude Fat Contents in Wheat Flour and Dry Noodles according to Determination Methods)

  • 이미숙
    • 한국식품영양학회지
    • /
    • 제23권3호
    • /
    • pp.381-385
    • /
    • 2010
  • 밀가루 및 5종의 건면에 함유되어 있는 정확한 조지방 함량을 정량하기 위하여 Soxhlet법을 비롯한 5종의 측정 방법과 3종의 추출 용매를 이용하여 상호간의 차이를 살펴보았다. 그 결과 밀가루에서는 0.09~1.37%, 건면에서는 0.07~1.36%의 조지방이 정량되었다. 이와 같이 밀가루와 건면에서 그 측정 방법에 따라 조지방 함량이 큰 차이를 보이는 이유는 지방질의 종류에 기인하는 것으로 밝혀졌다. 실제 시중 대형 마트에서 구입한 5종의 겉면에 표시되어 있는 영양성분표를 살펴 본바, 조지방 함량은 0~1.5%로 큰 차이를 보이고 있었다. 이러한 원인을 밝히기 위하여 밀가루와 건면에 함유되어 있는 지방질의 종류 및 함량을 정량하였다. 그 결과, 밀가루에는 1.02%의 유리 지방질과 0.21%의 결합 지방질이 함유되어 있었으며, 건면에는 0.95~1.01%의 유리 지방질과 0.21~0.25%의 결합 지방질이 함유되어 있었다. 밀가루 및 건면 제품에 함유되어 있는 유리 지방질에 함유되어 있는 극성 및 비극성 지방질의 함량을 조사한 결과, 밀가루에서 중성지방질, 당지방질 및 인지방질 함량은 각각 58.5%, 33.6% 및 8.6%였다. 상대적으로 5종의 건면 시료에서는 각각 49.2~58.2%, 33.3~41.6% 및 8.5~9.3% 범위였다. 또한, 밀가루 및 건면 제품에 함유되어 있는 결합 지방질에 함유되어 있는 극성 및 비극성 지방질의 함량을 조사한 결과, 밀가루에서 중성지방질, 당지방질 및 인지방질 함량은 각각 16.7%, 33.5% 및 49.5%였다. 상대적으로 5종의 건면 시료에서는 각각 13.2~15.3%, 35.6~45.7% 및 41.6~49.4%로 유리 지방질에 함유되어 있는 각 지방질의 함량과는 큰 차이를 보였다. 이와 같은 지방질 조성 및 함량에 따라 밀가루 및 건면에서 정확한 조지방 함량을 측정하기 위해서는 산가수분해법을 적용하여야 한다는 결론을 얻었다.

온돌 수면환경이 인체의 온열생리반응에 미치는 영향 (Effects of Ondol Sleep Environment on the Thermo-physiological Response of the Human Body)

  • 김정숙;성수광
    • 한국의류산업학회지
    • /
    • 제1권2호
    • /
    • pp.173-181
    • /
    • 1999
  • 한국의 청실양식은 84.9%가 요와 이불을 사용하여 온돌의 방바닥에 누워 자는 형식이다. 이에 본 연구는 온돌 난방 주택에서의 수연환경의 실태를 파악하기 위하여 온돌침실의 온열환경, 침상기후, 수면시 생리반응을 각 가정의 일상생활 중에서 직접 측정하여 계절별, 주택형태별에 따른 수면환경의 차이를 분석하였다. 그 결과, 계절 및 주택형태별에 따른 수면환경의 큰 온도차이에도 불구하고 수면 중 인체와 접촉하는 이불 밑과 요 시트의 침상온도는 계절과 주택형태에 관계없이 연평균 $30.5{\sim}34.1^{\circ}C$로 쾌적한 침상 내 온도를 나타내었을 뿐만 아니라 수면 중 직장온도도 연평균 $36.8^{\circ}C$로 계절 및 주택형태에 따른 유의한 차이는 인정되지 않았다. 그러나 침실환경에 대한 주관적 온열감각은 주택형태에 따라 유의한 차이를 나타내어 침실의 온열 중성점이 아파트 $25.9^{\circ}C$, 단독주택 $20.3^{\circ}C$로 아파트가 단독주택보다 $5.6^{\circ}C$ 높게 나타났다. 이는 건물의 구조가 주택은 조적조의 구조인 반면 아파트는 철근콘크리트의 구조로 우수한 단열력을 가지므로 외기온의 영향을 받기 어려워 높은 실내온도를 유지하였기 때문이다. 뿐만 아니라 거주자들이 주택 내 환경에 적응되어진 결과라고도 할 수 있겠으나 아파트 거주자의 측면에서는 온열환경에 대한 에너지 절약, 건강 유지 등의 관점에서 보다 효율적인 난방을 위한 쾌적한 생활온도 설정을 재고할 필요가 있다고 하겠다.

  • PDF

축력과 면내 및 면외 휨모멘트를 받는 철근콘크리트 벽체 (RC Wall under Axial Force and Biaxial Bending Moments)

  • 박홍근
    • 콘크리트학회지
    • /
    • 제10권4호
    • /
    • pp.113-124
    • /
    • 1998
  • 축력과 면내 및 면외의 두방향 휨모멘트를 받는 철근콘크리트 벽체에 대한 비선형 해석연구를 수행하였으며 , 해석결과를 분석하여 벽체의 강도산정법을 유도하였다. 비선형 해석연구를 위하여 철근콘크리트 벽체에 대한 재료 및 기하학적 비선형 해석을 수행할 수 있는 유한요소 해석방법을 개발하였다. 철근콘크리트의 재료모델로서 소성이론과 파괴모델의 통합모델을 사용하였다. 철근콘크리트 벽체에 대한 해석결과를 토대로 단면의 응력분포를 이상화하였으며, 이를 이용하여 새로운 강도산정법을 개발하였다. 이 방법에 따르면, 면외 휨모멘트에 의하여 단위길이의 벽체가 지지할 수 있는 축력이 결정되며, 이 허용 단위 축력에 따라서 총 축력과 면내 휨모멘트의 상호관계곡선이 결정된다. 면외 휨모멘트가 증가할수록 축력과 면내 휨모멘트의 상호관계곡선이 축소되며 이는 벽체 강도의 감소를 가리킨다. 이 새로운 방법을 , 휨변형후에도 단면이 평면으로 유지된다는 가정을 사용하는 기존의 강도산정법과 비교한다. 이 비교결과에 따르면 , 새로운 방법에 비하여 기존의 방법은 면외 휨모멘크가 작은 영역에서 벽체의 강도를 과소평가하며, 면외 휨모멘트가 큰 영역에서는 벽체의 강도를 과대평가한다.

Characteristics of Filefish Viscera Oil (말쥐치 내장유의 특성)

  • 이응호;김진수;주동식;김풍호
    • 한국수산과학회지
    • /
    • 제25권3호
    • /
    • pp.236-240
    • /
    • 1992
  • 우리나라 연안에서 가장 많이 어획되어 가공 부산물로 폐기되고 있는 말쥐치 내장을 효율적으로 식용 화하기 위한 일련의 기초 연구로서 말쥐치 내장지질의 지질성분에 대하여 검토하였다. 말쥐치 내장의 총지질함량은 4월에 $34.8\%$로서 최저함량을, 7월에 $59.5\%$로서 최고 함량을 나타내어 연중 $30\%$ 이상을 유지하고 있었다. 계절별 각 구성지방산 조성은 1월에서 5월이 될수록 포화산의 조성은 감소하였으나, 폴리엔산의 조성은 증가하였고 5월부터는 7월로 갈수록 포화산의 조성은 증가하였으나 폴리엔산의 조성은 감소하였다. 그리고 모노엔산의 조성은 년중 $24.6-27.9\%$의 범위로 큰 변화가 없었다. 6월에 어획된 말쥐치 내장의 중성지질, 당지질 및 인지질함랑은 중량비로서 각각 $94.3\%,\;1.6\%$$4.1\%$로 중성지질이 거의 대부분을 차지하였고, 중성지질은 트리글리세리드$(88.1\%)$가 주성분이었고 이외에 탄화수소$(4.1\%)$, 스테롤류$(3.0\%)$, 디글리세리드$(2.5\%)$, 유리지방산$(2.3\%)$ 등이 동정되었다. 말취지내장지질에 큰 영향을 미치리라 생각되는 중성지질의 주요지방산은 16:0, 18:0, 18:1, 20:5 및 22:6등으로 고도불포화지방산의 조성비가 특히 높았다. 이상의 결과로 미루어 볼 때 말쥐치 내장은 지질이 거의 절반 정도로 이루어져 있으면서 20:5 및 22:6과 같은 영양적 생리적 효과가 우수한 고도불포화지방산 조성비가 높아, 유지공업의 좋은 자원이 되리라 생각된다.

  • PDF

감마선 조사 유래 블랙베리(Rubus fructicosus L.) 돌연변이 계통의 농업부산물 사료가치 분석 (Forage Quality Evaluation of Mutant Lines derived from Gamma-ray Treatments in Rubus fructicosus L.)

  • 류재혁;김동섭;하보근;김진백;김상훈;안준우;정일윤;조한직;김이엽;강시용
    • 방사선산업학회지
    • /
    • 제7권1호
    • /
    • pp.37-43
    • /
    • 2013
  • We examined the forage quality to provide the basic information for the utilization of blackberry by-products (leaf and stem) among thirty-five mutant lines derived from gamma-ray. The leaves had higher crude protein (CP) contents than stems. In addition, the leaves showed broad ranges of variation in crude fat, crude fiber and crude ash. The overall forage quality of the stems were similar to those of the original variety. The mean of neutral detergent fiber (NDF) content of leaves and stems in mutant lines were 25.88% and 58.98%, respectively. Also, the mean of acid detergent fiber (ADF) content of leaves and stems in mutant lines were 15.43% and 49.27%, respectively. Forage quality grades of all blackberry leaf were special quality class. However, the blackberry stem ranked $1^{st}$ to $5^{th}$ in quality class. The stem diameter was negatively ($P{\leq}0.05$) correlated with the moisture and crude protein. Also, the fruit length was highly negatively ($P{\leq}0.01$) correlated with the RFV (relative feed value) in blackberry leaf. The one hundred fruit weight was highly negatively ($P{\leq}0.01$) correlated with the crude ash. Based on these results, the by-products of blackberry could provide high quality forage for feeding of live stock.