• PNF and Movement
• /
• v.16 no.3
• /
• pp.415-424
• /
• 2018

Purpose: This study aimed to determine the effects of various wheelchair handling directions on the upper limb muscle activities of wheelchair attendants while climbing a ramp. Methods: For the study participants, healthy males over 20 years of age were chosen, and the order of the direction of wheelchair handle grip was determined using a randomized method. The handling directions for pushing the wheelchair up a ramp included a general grip with ulnar deviation, a medial grip with wrist pronation, and a neutral grip with a neutral wrist. The muscle activities in the participants' upper limbs were measured using surface electromyography. For statistical data processing, SPSS 18.0 was used to perform repeated measures ANOVA in order to compare the muscle activity among the intervention groups. A contrast test was also conducted among the participants. The significance level (${\alpha}$) was set to 0.05. Results: There was a significant difference between groups using a general grip and a medial grip in the biceps brachii, triceps brachii, and flexor carpi radialis muscles (p<0.05). There was also a significant difference between using a general grip and a neutral grip in the biceps brachii and flexor carpi radialis muscles (p<0.05), and there was a significant difference between using a medial grip and a neutral grip in the biceps brachii and extensor carpi radialis brevis muscles (p<0.05). Conclusion: In this study, the wheelchair assistants' wrist muscle activity was the lowest with a neutral grip while ascending a ramp. Accordingly, this study proposes that wheelchair assistants push wheelchairs up ramps with a neutral grip.

• Journal of the Korean Ceramic Society
• /
• v.34 no.11
• /
• pp.1121-1128
• /
• 1997

In this study, the Ar plasma treatment was used to improve the surface roughness of Poly-Si1-xGex thin film deposited by RTCVD. The surface roughness and the resistivity of Si1-xGex thin film were investigated with variation of Ar plasma treatment parameters (electrode distance, working pressure, time, substrate temperature and R.F power). When the Ar plasma treatment was used, the cluster size decreased by the surface etching effect due to the increasing surface collision energy of particles (ion, neutral atom) in plasma under the conditions of decreasing electrode distance and increasing pressure, time, temperature, and R. F power. Although the surface roughness value decreased by the reduction of the cluster size due to surface etching effect, however, the resistivity increased. This may be due to the surface damage caused by the increasing surface collision energy. It was concluded that the surface roughness could be improved by the Ar plasma treatment, while the resistivity was increased by the surface damage on the substrate.

• Steel and Composite Structures
• /
• v.17 no.1
• /
• pp.21-46
• /
• 2014

This paper presents a simple n-order four variable refined theory for the bending and vibration analyses of functionally graded plates. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations of the present theory is reduced, and hence, makes it simple to use. The present theory is variationally consistent, uses the n-order polynomial term to represent the displacement field, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The governing equations are derived by employing the Hamilton's principle and the physical neutral surface concept. The accuracy of the present solutions is verified by comparing the obtained results with available published ones.

• The Korean Journal of Malacology
• /
• v.14 no.2
• /
• pp.131-147
• /
• 1998

A histochemical and ultrastructural study on the epithelia of some selected digestive tracks such as esophagus, crop, intestine of a land snail N. samarangae was carried out during the period of June 1997 to may 1998. The epithelium of digestive tract are simple columnar epithelium and consisted of five types of columnar cells. Type 1 cell which is majority in number has a brush border with microvilli on the free surface of the cell and contains numerous secretory granules supposed to be neutral mucopolysaccharide. Type 2 cell, elongated conical in shape, is rarely found in the epithelium. This cell also has a brush border with microvilli on its free surface and contains well developed rough surfaced endoplasmic reticulum, Golgi bodies, and secretory granules in various electron densities. This cell seems to produce both of acid and neutral mucopolysaccharides. Type 3 cell, which is morphologically similar to the Type 1 cell, has microvilli and cilia on the free surface and exists in group only in the limited regions of the intestine. Type 4 cell, typical goblet cell containing secretory granules in high electron density. Type 5 cell rarely found in the digestive tract. This cell contain inconspicuous materials.

• Applied Microscopy
• /
• v.18 no.2
• /
• pp.1-20
• /
• 1988

The species of the slug used in the experiment is Limax flavus L. For identifying the chemical characteristics of the epidermis, granules and mucus-producing cell of this animal is examined with methylene blue-basic fuchsin double stain and PAS-alcian blue reagent. For the ultrastructural research of the epidermal free surface, the epitheial cell and the parenchymal cell are used with scanning electron microscope and transmission elec-tron microscope respectively. I . Epidermal tissue The epidermal tissue of the slug is observed being divided into the dorsal and the ventral side(toot pad) respectively. 1) Dorsal epidermal tissue The dorsal epidermis of the slug is constituted with the simple columnar epithelium and the microvilli are compacted on the epidermal free surface. Two different types of the secretory granules of the neutral and the acid mucus are observed between the epithelial cells, and the neutral mucous granules are highest electron-dense but the acid mucous granules are observed to be electron-lucent. 2) Foot epidermal tissue The Foot epidermis is formed with the taller simple columnar epithelium than the dorsal epidermis and these cells have both a large number of the microvilli and a few number of the large villi. The secretory granules of three different types, which are acid, neutral and mixed mucous granule of two different types are observed between the epithelial cells. The neutral mucous granules are highest electron dense but the acid mucous granules are observed to be electron-lucent. II . Mucous granule-producing cell and mucus-producing cells Seven different types of the granules-producing cell and the mucus-producing cells are observed between the parenchyma. 1) A-type of acid mucous granule-producing cell The electron-lucent granules are largely occupied in the cytoplasm of these cells and then the granules are surrounded by irregular membrane. These electron-lucent granules exhibit alcianophilia with PAS-alcian blue reaction, so these granules are certified to be acid mucopolysaccharide. 2) B-type of acid mucus-producing cell The nucleus and the cytoplasm of these cells are pushed by the acid mucus of the electron-lucent toward the cell membrane. This mucus has been confirmed to be the acid mucopolysaccharide with PAS-alcian blue reagent. 3) A-type of neutral mucous granule-producing cell These cells contain the electron-dense round granules with approximately $1{\mu}m$ in diameter, which exhibit strongly PAS-positive reaction. These granules are confirmed to be the neutral mucoplysaccharide. 4) B-type of neutral mucous granule-producing cell These cells contain two different types of electron dense granules and electron-lucent granules; The former exhibits to be strongly PAS-positive and the latter to have alcianophilia reaction respectively. 5) C-type of neutral mucus-producing cell These cells are similar to the shape and the size of the B-type of mucus-producing cell but these two different types of cells are stained with reversing properties to each other. The mucus of the C-type cell that electron-lucent is largely occupied in the cytoplasm that exhibits strongly PAS-positive reaction. 6) D-type of neutral mucous granule-producing cell These cells contain round granules about $1{\mu}m$ in size which are observed to be medium electron-dense granules and those granules are stained brightly red with PAS-weak positive reaction. The granules are certified to be neutral mucopolysaccharide. 7) E-type of neutral mucous granule-producing cell These cells are similar to the shape and the size of the D-type of neutral mucous granule-producing cell. These cells contain a large number of granules with about $1{\mu}m$ in diameter showing electron-lucent and then granules are seen to be PAS-weak positive reaction. III. Parenchyma The clear cell and dark cell are found in the parenchyma of the Limax flavus L. 1) Clear cell These cells are round formed and the nucleus of the cells are larger than cytoplasm. These cells which have the electron-lucent cytosol possess poorly developed organelles. 2) Dark cell These cells are found to be dark cells due to high electron-density, which exhibit strongly methylene-blue reaction from double stain of methylene blue-basic fuchsin.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.239-244
• /
• 1999

aluminum sulfate (alum) as a representative retention aid in papermaking processes was added to pulp suspensions, and the aluminum components adsorbed on the pulp were investigated quantitatively by two types of X-ray elementary analyses with regard to simultaneous changes of their surface charges. X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence analysis (XFA) were applied to determine the aluminum components retained in pulp pads up to ca. 10 nm and 100${\mu}$m depth, respectively. In other words, XPS was utilized to analyze the outermost surface layers of the samples, and XFA was available for measurement of their extensive regions. A particle charge detector (PCD) was used to monitor streaming potentials at various pHs of the pulp mixtures under moderate sharing conditions. At pH 4.5 of pulp suspensions containing alum, surface charges of pulp fibers varied from negative to slight negative (approximately neutral) according to adsorption of aluminum components onto the pulp fibers. Subsequently, when a dilute NaOH solution in limited amounts was added to pulp mixtures, both streaming potentials and surface aluminum content of the pulp fibers increased distinctly although little total aluminum retention increased. Further addition of alkali solutions brought drastic decreases of the surface charges and surface aluminum content, while total aluminum content, on the contrary, increased gradually under neutral conditions. These results indicate that residual aluminum ions remained in pulp suspensions are predominantly adsorbed on surfaces of pulp fibers by adequate alkali additions and they must sufficiently cationize the fiber surfaces with increases of somewhat cationic aluminum complexes formed on the surfaces. On the other hand, aluminum components formed in higher pH ranges have nearly no contribution to improvement of charge properties of the pulp fiber surfaces, even though aluminum retention in pulp pads increases. XPS and XFA analyses combined with streaming potential measurement using a PCD suggest close relationships between aluminum content on the pulp fiber surfaces and their charge properties.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.59-66
• /
• 2017

PURPOSE: This study was to evaluate the muscle activity of gluteus medius, tensor fascia latae, and quadratus lumborum during side-lying abduction exercise in various pelvic tilting positions. METHODS: We measured the activity of three muscles in three pelvic tilt positions for 17 normal subjects with performing the side-lying hip abduction. Three pelvic tilt positions were posterior tilt, neutral tilt and anterior tilt. We used the mean value after participants performed the hip abduction three times each position. RESULTS: The activity of gluteus medius within three pelvic positions showed the highest activity in pelvic posterior tilt position and the lowest in pelvic neutral tilt position (p = .04). The activity of tensor fascia latae showed the lowest in pelvic posterior tilt position and the highest in pelvic posterior tilt position (p = .00). The activity of quadratus lumborum revealed the lowest activity in pelvic neutral tilt position and the highest in pelvic anterior tilt position (p = .00). The activity of selective gluteus medius activation according to pelvic displacement showed the highest activity in pelvic neutral tilt position and lowest in pelvic anterior tilt position (p = .00). CONCLUSION: Hip abduction with Pelvic posterior tilt position may be effective in increasing gluteus medius and may be effective in strengthening exercise program for the gluteus medius. In addition, Hip abduction with pelvic neutral position may have an effect on the selective gluteus medius, which is considered to be effective in the exercise program for muscle reeducation training of the gluteus medius.

• PNF and Movement
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2023

Purpose: The aim of this study is to provide basic information to create an efficient training program to improve shoulder stability and function in patients with injuries and in patients having undergone surgery of the supraspinatus and infraspinatus muscles, which have a relatively high incidence of injury in shoulder joint disease. Further, independent activities of the supraspinatus and infraspinatus muscles were investigated according to forearm rotation and the neutral and lateral rotation postures. Methods: The activities of the supraspinatus and infraspinatus muscles were measured using surface electromyography in 22 healthy adults in Busan, and isokinetic muscle strength measurement equipment was used to measure muscle strength during shoulder lateral rotation. The subjects performed lateral rotation of the shoulder in three different forearm postures (neutral, supine, prone) to measure shoulder muscle activity and lateral rotation strength. Results: The independent activity ratio (% Isolation) of the supraspinatus and infraspinatus muscles during lateral rotation of the shoulder joint demonstrated a significant difference (p<0.05) according to the change in forearm posture. Conclusion: The supraspinatus muscle showed independent activity ranging from highest to lowest in the order of pronation, neutral, and supination of the forearm, while the independent activity of the infraspinatus muscle ranged from highest to lowest in the order of neutral, supination, and pronation of the forearm. Therefore, the most active forearm positions for the supraspinatus and infraspinatus muscles are pronation and neutral, respectively.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.106-116
• /
• 2022

Background: Shoulder external rotation exercises are commonly used to improve the stabilizing ability of the infraspinatus. However, during exercise, excessive activation of the posterior deltoid compared to the infraspinatus causes the humeral head to move anteriorly in an abnormal position. Many researchers have emphasized selective activation of the infraspinatus during shoulder external rotation exercise. Objects: This study aims to delineate the optimal exercise method for selective activation of infraspinatus by investigating the muscle activities of the infraspinatus and posterior deltoid according to the four shoulder exercise methods and two forearm positions. Methods: Thirty healthy individuals participated in this study. The participants were instructed to perform shoulder external rotation exercises following four exercise methods: sitting external rotation (SIER); standing external rotation at 90° abduction (STER); prone external rotation at 90° abduction (PRER); side-lying external rotation (SLER), and two forearm positions (neutral, supinated). The electromyography (EMG) signal amplitude was measured during each exercise. Surface EMG signals were recorded from the posterior deltoid, infraspinatus, and biceps brachii. Results: EMG results of the infraspinatus and posterior deltoid in PRER, were significantly higher than that of the other exercises (p < 0.01). The EMG ratio (infraspinatus/posterior deltoid) in SIER was significantly higher than that of the other exercises. EMG activation of the posterior deltoid in SIER, PRER, and SLER was significantly higher in neutral than in supinated (p < 0.01). Furthermore, the EMG of the infraspinatus in SIER was significantly higher in neutral than in supinated (p < 0.01). The EMG ratio (infraspinatus/ posterior deltoid) in SIER was significantly higher in neutral than in supinated (p < 0.05.) Contrarily EMG ratios in PRER and SLER were significantly higher in supinated than in neutral (p < 0.05). Conclusion: The results show that clinicians should consider these exercise methods and forearm positions when planning shoulder external rotation exercises for optimal shoulder rehabilitation.

• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.40-49
• /
• 2013

Effects of magnesium and pH on corrosion of aluminum galvanically coupled to iron have studied by using potentio- dynamic and static tests for polarization curves, Mott-Schottky test for analysis of semiconductor property, and GD-AES and XPS for film analysis. Pitting potential was sensitive to magnesium as an alloying element but not to pH, while passive current was sensitive to pH but not to magnesium. It was explained with, instead of point defect model (PDM), surface charge model describing that the ingression of chloride depends on the state of surface charge and passive film at film/solution interface is affected by pH. In addition, galvanic current of aluminum electrically coupled to iron was not affected by magnesium in pH 8.4, 0.2M citrate solution but was increased by magnesium at the solution of pH 9.1. The galvanic current at pH 9.1 increased with time at the initial stage and after the exposure of about 200 minute, decreased and stabilized. The behavior of the galvanic current was related with the concentration of magnesium at the surface. It agreed with the depletion of magnesium at the oxide surface by using glow discharge atomic emission spectroscopy (GD-AES). In addition, pitting potential of pure aluminum was reduced in neutral pH solution where chloride ion maybe are competitively adsorbed on pure aluminum. It was confirmed by the exponential decrease of pitting potential with log of [$Cl^-$] around 0.025 M of [$Cl^-$] and linear decrease of the pitting potential. From the above results, unlike magnesium, alloying elements with higher electron negativity, lowering isoelectric point (ISE), are recommended to be added to improve pitting corrosion resistance of aluminum and its alloys in neutral solutions as well as their galvanic corrosion resistance in weakly basic solutions.