• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.24-31
• /
• 2015

The purpose of this study is to provide the thermal comfort range according to the residential style and clothing level at radiant floor heating space, and compare the annual energy consumption and energy cost for each condition. Lower neutral point temperature has been stood for floor sitting style than chair sitting style, which appears that the thermal sensation was affected by local heat transfer between floor surface and the human body. The result of research indicates that neutral point temperature was in inverse proportion with the clothing level. It is interpreted that the increasing of clothing level results decrement of heat loss from human body, and is available to achieve same thermal comfort at lower room temperature. It was analyzed that the floor sitting style is more economical residential style than the chair sitting style, because the energy consumption of the floor sitting style is saved by 6.0% in average to compare with that of the chair sitting style. It is analyzed that energy consumption has been decreased by 13.5% with the clothing level of 1.2 Clo than with that of 1.0 Clo, and decreased by 18.0% than with that of 0.8 Clo, which explains that the energy saving can be achieved with the variation in life habit to increase the clothing level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.3
• /
• pp.121-128
• /
• 1989

Volatile compounds were collected by simultaneous distillation extraction and carbon dioxide method, and analyzed by GC and GC-MS. The neutral fraction obtained from the whole steam volatile concentrate 55 kinds of components, phenolic fraction had 4 kinds of components, basic fraction had 13 kinds of components and 10 kinds of components were in acidic fraction. Alcohols, propanols, butanols, octanols, dodecanols etc. and aldehydes, pentanals, hexanal, 2-methyl-1-propanal, heptenal etc. were highly increased after boiled and roasted. And these compounds were contributed to formation of filefish flavor. The molecular ion peak of phenolic fraction was generally appeared in the range 100 to about 160. From the basic fraction, 2-methylpyrazine, 2,5-dimethylpyrazine, 2-ethyl-3,5-di-methylpyrazine and 2-methylpyridine were identified. The contents of basic compounds and furans obtained from the neutral fraction were increased at the higher heating temperature. The flavor of acidic fraction was influenced by the low molecular as isovaleric and valeric acid.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.426-434
• /
• 2008

A space averaged $SiH_4/O_2/Ar$ simulator for the high density inductively coupled plasma sources for $SiH_4/O_2/Ar$ discharge is developed. The developed simulator uses space averaged fluid equations for electrons, positive ions, negative ions, neutral species, and radicals in $SiH_4/O_2/Ar$ plasma discharge, and the electron heating model including the anomalous skin effect. Using the developed simulator, the dependency of the density of charged particles, neutral particles, and radicals, the electron temperature, the plasma resistance, and the power absorption coefficient for the RF power and pressure is calculated.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1453-1457
• /
• 1999

The optimal conditions of alkali isomerization to obtain conjugated linoleic acid (CLA) concentrate from vegetable oils which have antioxidant and anticarcinogenic properties were studied. The result of alkali isomerization of various vegetable oils indicated that CLA content of safflower oil which contains more linoleic acid than any other vegetable oils was the highest of all experimental vegetable oils. During alkali isomerization, the amount of cis-9, trans-11 CLA and total CLA content in safflower oil was the highest at $8{\sim}11%$ KOH concentration and $180{\sim}185^{\circ}C$. But heating time had no effect on CLA formation after $20{\sim}40$ minutes. As a result of alkali isomerization of neutral lipid, glycolipid and phospholipid in safflower oil, CLA content of neutral lipid class was higher than any other lipid classes. By urea treatment and HPLC fractionation, total CLA content in alkali-isomerized safflower oil increased to 95.4% from 78.9%.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.18-22
• /
• 2022

Photovoltaics (PV) power generation efficiency is affected by meteorological factors such as temperature and wind speed. In general, it is known that the power generation amount decreases because photovoltaics panel temperature rises and the power generation efficiency decreases in summer. Photovoltaics Thermal (PVT) power generation has the ad-vantage of being able to produce heat together with power, as well as preventing the reduction in power generation efficien-cy and output due to the temperature rise of the panel. In this study, the amount of heat collected by season and time was calculated for photovoltaics thermal modules using the International Weather for Energy Calculations (IWEC) data provided by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). Based on this, we propose a method of predicting the temperature of the photovoltaics panel using thermal analysis and then calculating the flow rate of coolant to improve power generation efficiency. As the results, the photovoltaics efficiencies versus time on January, April, July, and October in Jeju of the Republic of Korea were calculated to the range of 15.06% to 17.83%, and the maxi-mum cooling load and flow rate for the photovoltaics thermal module were calculated to 121.16 W and 45 cc/min, respec-tively. Though this study, it could be concluded that the photovoltaics thermal system can be composed of up to 53 modules with targeting the Jeju, since the maximum capacity of the coolant circulation pump of the photovoltaics thermal system applied in this study is 2,400 cc/min.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.169-174
• /
• 2021

Today, plastic waste has become a critical social issue due to the increasing of plastic consumption. Korean annual per capita plastic consumption was 132 kg, the most plastic consuming country in the world. Internationally, Carbon Neutral Agreement is underway due to global warming, consumers' interest and needs for biomass-based plastics has also been increased. In this study, film was produced by adding composite use additives to the biomass-based plastics according to concentration, and the resulting changes in discharge volume, melt index, and tensile strength were investigated. Melt index (MI) was significantly higher in PLA and PBAT than in petroleum-based resin LLDPE and LDPE. Also, among the same resin or in the same treatment group, MI has been increased when the heating temperature is increased. The discharge volume and gravity of the BDP-2 to which 4% compatibilizer was added were found to be higher among all treatments, while the tensile strength of MD and TD was also higher. BDP-2 was suitable to the film producing methods for biodegradable film production.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.149-159
• /
• 2022

Biomass is material that is comprehensive of carbonaceous materials from plants, crops, animals, and algae. It has been used as one of heating fuel since the beginning the emergence of human beings. Since biomass is regarded as carbon-neutral energy source, it has recently been attracting attention as an energy source that can replace fossil fuels. The most widely applied field is distributed power generation, and a method of generating electric power by driving an internal combustion engine with syngas produced by gasifier is chosen. While the composition of the syngas produced in gasifiers changes depending on the air flowing into the reactor, commercialized gasifiers so far do not control the air flowing into the reactor. When the inner pressure in reactor increases, the air sucked into the reactor is reduced. That change of amount of air makes the composition of syngas varied. Those variations of composition of syngas cause the incomplete combustion hence the power output of engine drops, which is a critical weakness of the gasification technology. In this paper, to produce the uniformly composed syngas, PID control is applied. The result was shown when the amount of air into the reactor is supplied with the constant amount using PID control, the standard deviation of caloric values of syngas is around 2[%] of its average value. Meanwhile the gasifier without PID control has the standard deviation of caloric values is around 7[%]. Therefore, Adopting PID control to supply constant air to the gasifier is highly desirable.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.125-134
• /
• 2007

In this paper, we analyze the orbital variation of the Korea Multi-Purpose SATellite-1(KOMPSAT-1) in a strong space environment due to satellite drag by solar and geomagnetic activities. The satellite drag usually occurs slowly, but becomes serious satellite drag when the space environment suddenly changes via strong solar activity like a big flare eruption or coronal mass ejections(CMEs). Especially, KOMPSAT-1 as a low earth orbit satellite has a distinct increase of the drag acceleration by the variations of atmospheric friction. We consider factors of solar activity to have serious effects on the satellite drag from two points of view. One is an effect of high energy radiation when the flare occurs in the Sun. This radiation heats and expands the upper atmosphere of the Earth as the number of neutral particles is suddenly increased. The other is an effect of Joule and precipitating particle heating caused by current of plasma and precipitation of particles during geomagnetic storms by CMEs. It also affects the density of neutral particles by heating the upper atmo-sphere. We investigate the satellite drag acceleration associated with the two factors for five events selected based on solar and geomagnetic data from 2001 to 2002. The major results can be summarized as follows. First, the drag acceleration started to increase with solar EUV radiation with the best cross-correlation (r = 0.92) for 1 day delayed F10.7. Second, the drag acceleration and Dst index have similar patterns when the geomagnetic storm is dominant and the drag acceleration abruptly increases during the strong geomagnetic storm. Third, the background variation of the drag accelerations is governed by the solar radiation, while their short term (less than a day) variations is governed by geomagnetic storms.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1126-1135
• /
• 2019

From a sample of bamboo byproduct, the protease-producing yeast strain CO-1 was newly isolated. Strain CO-1 is spherical to ovoid in shape and measures $3.1-4.0{\times}3.8-4.4{\mu}m$. For the growth of strain CO-1, the optimal temperature and initial pH were $30^{\circ}C$ and 4.0, respectively. The strain was able to grow in 0.0-15.0%(w/v) NaCl and 0.0-9.0%(v/v) ethanol. Based on a phylogenetic analysis of its 18S rDNA sequences, strain CO-1 was identified as Pichia anomala. The extracellular protease produced by P. anomala CO-1 was partially purified by ammonium sulfate precipitation, which resulted in a 14.6-fold purification and a yield of 7.2%. The molecular mass of the protease was recorded as approximately 30 kDa via zymogram. The protease activity reached its maximum when 1.0%(w/v) CMC was used as the carbon source, 1.0%(w/v) yeast extract was used as the nitrogen source, and 0.3%(w/v) $MnSO_4$ was used as the mineral source. The protease revealed the highest activity at pH 7.0 and $30^{\circ}C$. This enzyme maintained more than 75% of its stability at a pH range of 4.0-10.0. After heating at $65^{\circ}C$ for 1 hr, the neutral protease registered at 60% of its original activity. The protease production coincided with growth and attained a maximal level during the post-exponential phase.

• Korean Journal of Environmental Biology
• /
• v.21 no.4
• /
• pp.358-365
• /
• 2003

A bacterial strain capable of producing a novel bioflocculant was isolated from a biofilm sample and identified as Bacillus megaterium G31. The highest biopolymer yield was achieved when the organism was cultivated in a medium containing acetate as the sole carbon source and ($NH_4)_2HPO_4$as the nitrogen source. In kaolin suspension, the flocculating activity was highest at 170 mg I$^{-1}$ and decreased at the higher bioflocculant concentrations. The crude bioflocculant produced by the organism was purified by ethanol precipitation and gel permeation chromatography. The FTIR spectrum of the purified bioflocculant revealed that the bioflocculant might be a heterogeneous polysaccharide composed of hexosamines and neutral sugars. The analysis of sugar components of the bioflocculant using high performance anion-exchange chromatography showed that the sugar constituents of the bioflocculant were glucosamine, fucose, galactosamine, galactose, glucose, mannose in approximate molar ratio of 4 : 1 : 6 : 3 : 8 : 19. Its flocculating activity was stimulated by various cations. The bioflocculant was thermo-stable and retained 64% of its original activity after heating at $100^{\circ}C$ for 50 min.