• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.47-53
• /
• 2023

In this paper, We designed a waveguide-type feed structure that converts millimeter wave dual-polarized signals into monopulse signals and presented a manufacturing method. At millimeter-wave such as the W band, the size of the waveguide is very small, making it very difficult to manufacture complex structures. Therefore, because manufacturability is important for the waveguide-type feed structure in the millimeter-wave, electro forming and diffusion bonding were proposed and verified in this study. The designed monopulse feed structure consists of eight 180° hybrids that combine 90° hybrids and self-compensating phase shifters, and four OMTs to separate dual polarization. The designed feed structure was designed to facilitate electro forming and diffusion bonding, and the manufactured feed structure was verified through a network analyzer. It was confirmed that the two proposed production methods produce a monopulse signal well through the measured magnitude and phase of the port.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.356-361
• /
• 2024

This paper deals with the design and fabrication of a coplanar waveguide (CPW)-fed super-wideband semicircular-disk-shaped dipole antenna operating in a frequency band of 2.4 GHz or higher. To feed the antenna, a CPW feed line was appended to the center of the lower arm of the semicircular-disk-shaped dipole antenna. For miniaturization, square patches were added to the ends of the two arms of the semicircular-disk-shaped dipole, whereas the slot width of the CPW feed line at the center of the dipole antenna was increased to improve impedance matching in the 5.4-6.3 GHz band. The simulated frequency band of the proposed antenna for a voltage standing wave ratio (VSWR) less than 2 was 2.369-30 GHz(170.7%), whereas the fabricated antenna was maintained VSWR less than 2 in the frequency range of 2.378-20 GHz when measured using a network analyzer operating up to 20 GHz so it can be applied as a super-wideband antenna for next-generation mobile communications.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.184-192
• /
• 2024

Objective: This study aims to investigate the genetic structure and characteristics of the Angus cattle population in Hungary. The survey was performed with the assistance of the Hungarian Hereford, Angus, Galloway Association (HHAGA). Methods: Genetic parameters of 1,369 animals from 16 Angus herds were analyzed using the genotyping results of 12 microsatellite markers with the aid of PowerMarker, Genalex, GDA-NT2021, and STRUCTURE software. Genotyping of DNA was performed using an automated genetic analyzer. Based on pairwise identity by state values of animals, the Python networkx 2.3 library was used for network analysis of the breed and to identify the central animals. Results: The observed numbers of alleles on the 12 loci under investigation ranged from 11 to 18. The average effective number of alleles was 3.201. The overall expected heterozygosity was 0.659 and the observed heterozygosity was 0.710. Four groups were detected among the 16 Angus herds. The breeders' information validated the grouping results and facilitated the comparison of birth weight, age at first calving, number of calves born and productive lifespan data between the four groups, revealing significant differences. We identified the central animals/herd of the Angus population in Hungary. The match of our group descriptions with the phenotypic data provided by the breeders further underscores the value of cooperation between breeders and researchers. Conclusion: The observation that significant differences in the measured traits occurred among the identified groups paves the way to further enhancement of breeding efficiency. Our findings have the potential to aid the development of new breeding strategies and help breeders keep the Angus populations in Hungary under genetic supervision. Based on our results the efficient use of an upcoming genomic selection can, in some cases, significantly improve birth weight, age at first calving, number of calves born and the productive lifespan of animals.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.687-698
• /
• 2001

This paper presents a three dimensional stacked pad area away (PAA) package configuration as an implementation method of radio frequency (RF) circuits. 224MHz RF circuits of intelligence traffic system(ITS) were constructed with the stacked PAA RF pakage configuration. In the process of manufacturing the stacked PAA RF pakage, RF circuits were partitioned to subareas following their function and operating frequency. Each area of circuits separated to each subunits. The operating characteristics of RF PAA package module and the electrical properties of each subunits were examined. The measurement of electrical parameters for solder balls which were interconnects for stacked PAA RF packages showed that the parasitic capacitance and inductance were 30fF and 120pH, respectively, which might be negligible in PAA RF packaging system. HP 4396B network/spectrum analyzer revealed that the amplification gain of a receiver and transmitter at 224 MHz was 22dB and 27dB, respectively. The gain was 3dB lower than designed values. The difference was probably generated from fabrication process of the circuits by employing commercial standard

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2003

In addition to wired communication technology, wireless communication technology has had communication revolution nowadays. Bluethooth technology carries out data/voice communication within pico-net. Nowadays the various services are supported by access network connected to public network. This paper presents implementation of bluetooth protocol analyser which simulates bluetooth protocol. MS window98 and visual C are used for development environment and application program is operated over the firmware loaded on the bluetooth device connected to the PC through UART which of the maximum transmission rate is 115kbps because transmission rate less than 20kbps affects rarely the performance. The performance analysis on the propose system is carried out as simulating the signalling information for the voice test and the traffics between two bluetooth systems for file transfer. The throughput analysis for file transfer service and call processing capacity for voice service are considered as performance analysis parameters. File access time is very important parameter and throughput is 13 kbps in case breakpoint time to file access is 0.04sec. Also call processing time is about 16.6ms in case of communication with the headset. The performance analysis of simulation results satisfies with bluetooth device development.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.391-398
• /
• 2001

This study was carried out to investigate the effects of storage temperature(5$\^{C}$ and 25$\^{C}$) and time(1, 24, 48 and 72hours) on the retrogradation characteristics of mungbean starch gels by using differential scanning calorimeter, rapid visco-analyzer, $\beta$-amylase method, X-ray diffractometer and scanning electron microscope. Endothermic peaks of gels stored at 5$\^{C}$ were shifted to the lower temperature than those stored at 25$\^{C}$ and endothermic enthalpy of gels stored at 5$\^{C}$ was greater than that stored at 25$\^{C}$. DSC thermograms showed that the retrogradation rate of gels stored at 5$\^{C}$ was higher than that shored at 25$\^{C}$. The pasting properties of the gels such as peak viscosity and final viscosity increased with increasing storage time except the gels stored at 25$\^{C}$ for 72 hours and this trend was more apparent at the storage temperature of 5$\^{C}$. The digestibility measured by $\beta$-amylase method decreased with increasing storage time and this trend was more apparent at the storage temperature of 5$\^{C}$. X-ray diffraction patterns of the gels stored at 5$\^{C}$ showed more distinct peak than those stored at 25$\^{C}$, but no difference was detected by the storage time. The microstucture of all the gels showed a well developed three dimensional network The network structure of the gels stored at 25$\^{C}$ formed a thick matrix after 72 hours and those stored at 5$\^{C}$ from the early stage of storage.

• The KIPS Transactions:PartC
• /
• v.13C no.4 s.107
• /
• pp.471-480
• /
• 2006

Recently, multimedia communication services, such as video conferencing and voice over IP, have been rapidly spread. H.323 is an international standard that specifies the components, protocols and procedures that provide multimedia communication services of real-time audio, video, and data communications over packet networks, including IP based networks. H.323 is applied to many commercial services because it supports various network environments and has a good performance. But communication services based on H.323 may have some problem because of current network trouble or mis-implementation of H.323. The understanding of this problem is a critical issue because it improves the quality of service and is easy to service maintenance. In this paper, we implement the analysis system for H.323 protocol wihch includes H.245, H.225.0, RTP, RTCP, and so on. Tills system is able to capture, parse, and present the H.323 protocol in real-time. Through the operation test and performance evaluation, we prove that our system is a useful to analyze and understand the problems for communication services based on H.323.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.5
• /
• pp.583-589
• /
• 2002

The Internet is absolutely contributed to information telecommunication revolution nowadays. Realizing local network at the various type of buildings such as a company and a university, ethernet is used for subnet and FDDI, ATM are used for backbone mainly in order to get internet services. Processing TCP/IP protocol suite and analyzing the protocol exactly is essential to detecting the problem occurring in the network and developing communication equipment. This paper presents implementation of ethernet LAN protocol analyser which monitors and simulates ICP/IP protocol suite carrying the Internet and non-Internet protocol such as Netware and NetBIOS. MS window98 and visual C are used for development environment and application program operates on the NDIS firmware. The performance analysis on the proposed system is carried out as monitoring and simulating the traffic over LAN of a university. In the result of monitoring the system, the processing time of a packet captured over the LAN is about 1.5ms. In case of simulating the system, the processing time to be taken carrying out TCP connection and disconnection once is packet is about 8.6ms. The performance analysis of monitoring and simulation results satisfies with 10 Mbps ethernet LAN environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.108-109
• /
• 2022

In this study analyzed experimental data on noise interference caused by engine operating apply surface wave communication in the engine room. For the experiment, 7 areas of the engine room on 256 ton tug boat and measured noise during engine on off using signal analyzer for effect surface wave communication. In order to construct and actual communication network based on the analysis of the noise and confirm the characteristics of surface wave communication in the area made metal bulkheads the actual communication network installed communication equipment between three metal bulkheads and conducted a comparative experiment with wireless communication. The difference was confirmed. As a result, in the case of surface wave communication, there was no significant difference in the transmission and reception rates before and after engine operation in an environment with three bulkheads, but in the case of Wi-Fi using wireless, the performance deteriorated significantly during operation. was confirmed. As a result of analyzing the experimental data, it was confirmed that noise caused by engine operation affects wireless communication but does not affect surface wave communication. Therefore, even in the area with a lot of electromagnetic wave noise in the ship, when the surface wave communication system is configured using the ship's metal structure, it is possible to replace the wireless communication and furthermore, it is possible to apply the surface wave communication in the enclosed space and the engine room in the ship.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.293-299
• /
• 2007

Intelligent pipeline inspection gauges (PIGs) are inspection vehicles that move along within a (gas or oil) pipeline and acquire signals (also called sensor data) from their surrounding rings of sensors. By analyzing the signals captured in intelligent PIGs, we can detect pipeline defects, such as holes and curvatures and other potential causes of gas explosions. There are two major data access patterns apparent when an analyzer accesses the pipeline signal data. The first is a sequential pattern where an analyst reads the sensor data one time only in a sequential fashion. The second is the repetitive pattern where an analyzer repeatedly reads the signal data within a fixed range; this is the dominant pattern in analyzing the signal data. The existing PIG software reads signal data directly from the server at every user#s request, requiring network transfer and disk access cost. It works well only for the sequential pattern, but not for the more dominant repetitive pattern. This problem becomes very serious in a client/server environment where several analysts analyze the signal data concurrently. To tackle this problem, we devise a fast in-memory cache manager, called T-Cache, by considering pipeline sensor data as multiple time-series data and by efficiently caching the time-series data at T-Cache. To the best of the authors# knowledge, this is the first research on caching pipeline signals on the client-side. We propose a new concept of the signal cache line as a caching unit, which is a set of time-series signal data for a fixed distance. We also provide the various data structures including smart cursors and algorithms used in T-Cache. Experimental results show that T-Cache performs much better for the repetitive pattern in terms of disk I/Os and the elapsed time. Even with the sequential pattern, T-Cache shows almost the same performance as a system that does not use any caching, indicating the caching overhead in T-Cache is negligible.