• Journal of Advanced Navigation Technology
• /
• v.6 no.1
• /
• pp.37-43
• /
• 2002

This paper describes the performance evaluation and analysis of Wireless Local Area Network (W-LAN) in the 5 GHz ISM-band in compliance with IEEE 802.11a. At present, most W-LAN products are based on 2.4 GHz band, but low speed (11Mbps) has the limitation to serve systems demanding high-speed data transmission. To solve this problem, it is necessary to design next generation W-LAN system with 54Mbps in the 5GHz. It is sure that implementation of next generation W-LAN will bring competitive advantages. In particular, it will support telecommunications for high-speed mobile environments as well as for fixed places such as a school zone, a lecture room, a hospital and other premises. A few simulation methods are applied to more accurate and reliable performance analysis of next generation W-LAN. To verify if continuous data service is supported for a high-speed mobile notebook, multi-path fading channels between wireless Access Point (AP) and wireless Network Interface Card (NIC) are modeled. In addition, low interference is analyzed via convolutional codes and Orthogonal Frequency-Division Multiplexing (OFDM). Also, to obtain reliable Bit Error Rate (BER), a single tap Least Mean Square (LMS) equalizer is applied. Given the above simulation, next generation W-LAN is an ideal solution for continuous data transmission in high-speed mobile environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.699-711
• /
• 2003

Home networking and Internet control technologies must satisfy three requirements with a view to being applied to home for raising the qualify of human life. Firstly, the cost of adding home networking ability to the traditional appliance must be minimized. Secondly, the mutual accessibility between home network and Internet must be guaranteed in the various Internet service environment of home. Finally, communication must be possible between the home network and the Internet that use different communications protocols. This paper proposes the ARCS (Appliance Remote Control System) that controls appliances based on LnCP (Living network Control Protocol) via the Internet. LnCP is the most cost-effective network and control protocol for home network. ARCS guarantees the accessibility from the Internet to home network and provides users with the virtual interface designed for controlling appliances using the Internet application program. In addition, this paper proposes AICS (Appliance Internet Control Specification). AICS, is based on LnCP, defines the message structure and control commands for the Internet control communication. ARCS and home gateway are developed to meet AICS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.54-61
• /
• 2007

In this paper, on-demand service streaming protocol for user-created contents in digital cable broadcasting environment is considered. In order to provide variety media contents service like UCC in digital cable broadcasting environment, the same service model as RVOD(Real Video on Demand) is required and the different interface for each broadcasting platform is needed in a current OCAP environment. Using return path based RTP, we separate existing VOD stream band into broadcasting and VOD stream band. In order to broaden On-demand service, consistent expansion of the infrastructure same as live broadcasting system is inefficient in the digital cable broadcasting environment. Using existing network protocol, the service which is insensitive to the infrastructure for VOD service becomes possible. Therefore we considered the analysis of the class of download available structure in the Set-Top-Box for RTP(Real-time Transport Protocol) and designing the decoding available streaming server for UCC transcoding and transmission in the receiver. Designing a efficient VOD service and system under the broadcasting environment gives a expansion of On-Demand service and more chance to upload and utilization of contents.

• Journal of the Korean Society for information Management
• /
• v.27 no.4
• /
• pp.33-47
• /
• 2010

The growth of IT technology and the popularity of network based information sharing increase the number of digital contents in military area. Thus, there arise issues of finding suitable public information with the growing number of long-term preservation of digital public information. According to the source of raw data and the time of compilation may be variable and there can be existed in many correlations about digital contents. The business service ontology makes knowledge explicit and allows for knowledge sharing among information provider and information consumer for public digital archive engaged in improving the searching ability of digital public information. The business service ontology is at the interface as a bridge between information provider and information consumer. However, according to the difficulty of semantic knowledge extraction for the business process analysis, it is hard to realize the automation of constructing business service ontology for mapping from unformed activities to a unit of business service. To solve the problem, we propose a new business service auto-acquisition method for the first step of constructing a business service ontology based on Enterprise Architecture.

• KIISE Transactions on Computing Practices
• /
• v.23 no.12
• /
• pp.670-676
• /
• 2017

Naval combat systems use real-time processing and compositing of collected information to provide the optimal combat capabilities that maximize survival and ensure mission effectiveness. The software for a combat system has dozens to thousands of components depending on the size of the system, and the communication between the components is achieved via DDS. Although the message interface of the combat system is managed through MDMS, an increase in the system size can result in problems such as the deterioration of the development efficiency. In this paper, we implement XMDMS to operate a distributed processing environment and then solve the problem of the reduction in the development efficiency caused by a load at the server. The experimental results shows that XMDMS improves the processing delay and network performance compared to MDMS.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.74-82
• /
• 2007

IPv6 is the internet protocol for next generation which can solve the problem of IPv4 protocol. Mobile IPv6 efficiently provides the mobility for mobile devices holding the properties of IPv6. iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard Ethernet switch and router for this kind of access, it can not only be applized to Ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the IPv6 iSCSI initiator driver which was originally designed for wired networks. Also, this paper describes about the implementation and performance analysis of mobile education service system using virtual storage devices in IPv6 wireless networks.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.353-356
• /
• 2007

With advances in sensor technology, current researches on the pertinent techniques are actively directed toward the way which enables the USN computing service. For many applications using sensor networks, the incoming data are by nature characterized as high-speed, continuous, real-time and infinite. Due to such uniqueness of sensor data characteristics, for some instances a finite-sized buffer may not accommodate the entire incoming data, which leads to inevitable loss of data, and requirement for fast processing makes it impossible to conduct a thorough investigation of data. In addition to the potential problem of loss of data, incoming data in its raw form may exhibit high degree of complexity which evades simple query or alerting services for capturing and extracting useful information. Furthermore, as traditional mining techniques are developed to handle fixed, static historical data, they are not useful and directly applicable for analyzing the sensor data. In this paper, (1) describe how three mining techniques (sensor data outlier analysis, sensor pattern analysis, and sensor data prediction analysis) are appropriate for the USN middleware structure, with their application to the stream data in ocean environment. (2) Another proposal is a middleware structure based on USN environment adaptive to above mining techniques. This middleware structure includes sensor nodes, sensor network common interface, sensor data processor, sensor query processor, database, sensor data mining engine, user interface and so on.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10B
• /
• pp.957-964
• /
• 2003

The circulation of unwholesome information such as obscene and violent information is gradually increasing based on the rapid expansion of information communications infrastructure. Those kinds of information are harmful to the adolescents and even cause social problems so that active countermeasure is requited. In order to cope with the spread of unwholesome information, appropriate regulating methods are absolutely in need by establishing or revising information communications-related laws. In this paper, we had analyzed domestic and foreign programs with existing harmful information blocking method, and then designed and implemented a selective blocking program based on Platform for Internet Contents Selection(PICS) by using selective blocking technology based on Internet contents rating system. We also proposed a compromised rating system blocking method that consists of selective filtering function by age and the popular blocking list. The proposed system has advantages in that there would be no increase in network load resulting from blocking list update and inquiry, it is possible to perform active selective filtering considering user's age, and it may introduce self-imposed rating.

• Korean Journal of Remote Sensing
• /
• v.13 no.1
• /
• pp.31-46
• /
• 1997

In recent years, as remotly-sensed image processing technologies have been improved and spread widely in the application areas, many new requirements for the image processing technologies have arisen. However, it is difficult and costly to access remotely-sensed image processing systems. Moreover, these systems have thier own processing facilities which are not easily accessible for general users. In this paper, those problems are challenged by adopting Internet as a universal information network for accessing remotly-sensed image DBMS and by allowing users to work remotely on the image processing. A remotly-sensed image processing system which can be accessed via Internet was designed and implemented. This system can be used to manipulate images over remote DBMS. The Illustra object-oriented relational DBMS with CGI(Common Gateway Interface) web interface was used in this project. The client consists of a WWW(World Wide Web) Netscap$e^{TM}$ browser, and the server consists of HTTPD(Web daemon), Illustra DBMS and Java modules in order to process the image being displayed. The developed system was tested on LAN environment and the service response time met the requirements.