• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.6
• /
• pp.325-332
• /
• 2003

The loss minimization is one of the most important problems to save the operational cost in distribution systems. This paper presents an efficient method for optimal feeder reconfiguration of distribution systems. Chaos search algorithm (CSA) is used to reconfigure distribution systems so that active power losses are globally minimized with turning on/off sectionalizing switches. In optimization problem, the CSA searches the global optimal solution on the basis of regularity in chaotic motions and easily escapes from local or near optimal solution. The CSA is tested on 15 buses and 32 buses distribution systems, and the results indicate that it is able to determine appropriate switching options for global optimum reconfiguration.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.725-732
• /
• 2005

The reconfiguration management scheme changes a logical topology in response to changing traffic patterns in the higher layer of a network or the congestion level on the logical topology. In this paper, we formulate a reconfiguration scheme with a shared buffer-constrained cost model based on required quality-of-service (QoS) constraints, reconfiguration penalty cost, and buffer gain cost through traffic aggregation. The proposed scheme maximizes the derived expected reward-cost function as well as guarantees the required flow's QoS. Simulation results show that our reconfiguration scheme significantly outperforms the conventional one, while the required physical resources are limited.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.1-8
• /
• 2003

In this paper. we develop an analytical model to evaluate the virtual topology reconfiguration phase of optical Internet networks. To counter the continual approximation problem brought by traditional heuristic approach, we take the traffic prediction into consideration and propose a new heuristic reconfiguration algorithm called Prediction based Multi-stage Reconfiguration approach. We then use this analytical model to study the different configuration operation policies in response to the changing traffic patterns in the higher layer and the congestion level on the virtual topology. This algorithm persists to decide the optimal instant of reconfiguration easily based on the network state. Simulation results show that our virtual topology management Policy significantly outperforms the conventional one, while the required physical resources are limited.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1460-1465
• /
• 2017

Outage areas can be transferred to adjacent feeders to restore power supply in case of the fault on the distribution system. Feeders in the small island or mountain area may not have backup feeders due to the low density of load. In this weakly meshed open loop system, BESS can be used as a backup feeder to improve reliability of power supply. This paper proposes a new network reconfiguration method for BESS based service restoration. Fuzzy decision making technique is adopted to deal with fuzziness of service restoration planning rules. Case studies using KEPCO real distribution system have been performed to verify feasibility of the proposed method.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.102-108
• /
• 2002

Due to the many attractive aspects of DG in the future power distribution system, distribution automation will be a center hub of integration of the distribution system and resources to satisfy the various needs of customers in a competitive and deregulated environment. In this paper, operation strategies are presented which use network reconfiguration of the automated distribution systems with DG as a real-time operation tool for loss reduction and service restoration from the view of distribution operation. The algorithms and operation strategies of an automated distribution system with DG are introduced to achieve the positive effects of DG in distribution systems. A simple case study shows the effectiveness of the proposed operation strategies.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.2
• /
• pp.215-222
• /
• 2013

Electrical power distribution systems are critical links between the utility and customer. In general, power distribution systems have unbalanced feeders due to the unbalanced loading. The devices that dependent on balanced three phase supply are affected by the unbalanced feeders. This necessitates the balancing of feeders. The main objective of reconfiguration is to balance the loads among the phases subject to constraints such as load flow equations, capacity and voltage constraints and to reduce the real power loss, while subject to a radial network structure in which all loads must be energized. Therefore, the distribution system reconfiguration problem has been viewed as multi-objective problem. In this paper, the hybrid heuristic algorithm has been used for reconfiguration, which is the combination of fuzzy and greedy algorithms. The purpose of the introduction of greedy is to refrain the searching for the period of phase balancing. The incorporation of fuzzy helps to take up more objectives amid phase balancing in the searching. The effectiveness of the proposed method is demonstrated through modified IEEE 33 bus and modified IEEE 125 bus radial distribution system.

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.35-43
• /
• 2019

A metro ring network using WDM technology requires many issues to be considered even though its transmission distance is shorter and its transmission capacity is lower than a long-haul WDM system. Unlike a long-haul WDM system, which is basically point-to-point configuration, a metro ring network usually equips with capabilty of wavelength reconfiguration. Therefore network performance considering crosstalk within OADM and the network behavior when the ring network is closed should be analyzed before implemented. We discussed some of results analyzed for the issues. Furthermore we proposed a novel method to design a dispersion map for a ring network, and demonstrated the methodology with an exemplary 8-node ring network of 399km circumference.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.204-209
• /
• 2003

Recently, The TCN(Train Communication Network} as the distributed control systems for electric vehicles, which is the international standard of the intra vehicle communication, actively recognizes variations and supports reconfiguration of the train network when a vehicle is separated or recombined. The technique of reconfiguration to take variety and interoperability of a vehicle constitution is used when the vehicle constitution is changed. At the time, each node making up vehicle network shares the information about the variation of vehicle constitutions and the state of nodes. In the hierarchical TCN structure, an exchange of data becomes available as a work to transmit information between components is performed at the node playing a role of gateway. This paper proposes a protocol to transmit the information of the train reconfiguration. The protocol gives an application to renew a list for transmitting information and to perform the transmission that can guarantee periodic and non-periodic data transmission between nodes when the network nodes changed by a variation of the network state are reconfigured. If use this protocol, can use functions that are offered in the electric railcar at the same time that composition of vehicles is completed without delay. And when driver of the electric railcar inspect before running of vehicles, can confirm state of vehicles visually through monitor in driver's room.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1156-1158
• /
• 1998

This paper Presents two distribution-feeder models to simplify complicated distribution system calculations. These equivalent models are developed to simulate the total series voltage drop at the end of the given feeder and the total line loss of the given feeder accurately. In addition, the proposed models are bidirectional. This means that power infeed can be at either end and the model is accurate. Also, it is shown that the proposed models are suitable for network reconfiguration.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.1
• /
• pp.35-54
• /
• 1995

Routing in ATM network is set up by combination of both virtual path routing and virtual channel routing. While virtual channel is similar concept to virtual circuit of data networks, virtual path is a special concept which is not used in traditional data networks. Virtual path can rearrange in structure and size by simply changing virtual path routing tables and giving the network the capability to eash allocate network resources according to the demand needs. This paper provides reconfiguration models of virtual path network which give the bandwidth of link and the routing path for each traffic class. The reconfiguration models are network optimization problems of multicommodity network flow type. The numerical examples are also included.