• Proceedings of the Optical Society of Korea Conference
• /
• 2004.02a
• /
• pp.138-139
• /
• 2004

In this paper, we propose a reflective In-Plane Switching twisted nematic mode with negative liquid crystal and weak surface anchoring energy (10$^{-6}$ J/m) in order to enhance reflectance and cellgap margin.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.330-330
• /
• 2008

It is widely investigated to liquid crystal (LC) alignment using non-contact alignment method such as ion-beam (IB) irradiation, UV alignment, and oblique deposition. Because conventional rubbing method has some drawbacks. These include defects from dust and electrostatic charges and rubbing scratch during rubbing process. In addition, rubbing method needs additional process to remove these defects. Therefore rubbing-free methods like ion-beam irradiation are strongly required. We studied LC alignment effect on poly imide surface by IB irradiation and electro-optical (EO) characteristics of twisted nematic liquid crystal display (TN-LCD). In this experiment, a good uniform alignment of the nematic liquid crystal (NLC) with the ion-beam exposure on the polyimide (PI) (SE-150 from Nissan Chemical) surface was observed. We also achieved low pretilt angle as a function of ion-beam irradiation intensity. In addition, it can be obtained the good EO properties of the IB-aligned TN-LCD on PI surface. Some other experiments results and discussion will be included in the poster.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.498-499
• /
• 2002

In In order to develop liquid crystal mixtures of high response time and high nematic-isotropic transition temperature ($T_{NI}$) for LCD-TV application, novel liquid crystal molecules with a fluoro-isothiocyanate moiety were synthesized. They showed remarkably high $T_{NI}$ over 200 $^{\circ}C$, wide mesophase range of 170 $^{\circ}C$, high dielectric anisotropy of 14 and high optical anisotropy of 0.19. New LC Mixtures of the high $T_{NI}$ ($85{\sim}100 ^{\circ}C$) and fast response time ($8{\sim}10ms$) were blended with the novel fluoro-isothiocyanate containing LC molecules, phenylcyclohexanes, bicyclohexanes and ester compounds. It was also studied on optimum pitch of liquid crystal for high speed twisted nematic LCD-TV applicaton. The LC mixtures show a fast speed of the below one frame rate in real 17" TV panel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.413-414
• /
• 2002

In In order to develop liquid crystal mixtures of high response time and high nematic-isotropic transition temperature ($T_{NI}$) for LCD-TV application, novel liquid crystal molecules with a fluoroisothiocyanate moiety were synthesized. They showed remarkably high $T_{NI}$ over 200 $^{\circ}C$, wide mesophase range of 170 $^{\circ}C$, high dielectric anisotropy of 14 and high optical anisotropy of 0.19. New LC Mixtures of the high $T_{NI}$ (85${\sim}$100 $^{\circ}C$) and fast response time (8${\sim}$10ms) were blended with the novel fluoroisothiocyanate containing LC molecules, phenylcyclohexanes, bicyclohexanes and ester compounds. It was also studied on optimum pitch of liquid crystal for high speed twisted nematic LCD-TV applicaton. The LC mixtures show a fast speed of the below one frame rate in real 17" TV panel.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.526-529
• /
• 2002

We studied the nematic liquid crystal (NLC) aligning capabilities by the UV alignment method on a diamond like carbon (DLC) thin film surface. A good LC alignment by UV exposure on the DLC thin film surface at $200\AA$ of layer thickness was achieved. Also, a good LC alignment by the UV alignment method on the DLC thin film surface was observed at annealing temperature of $180^{\circ}C$. However, the alignment defect of the NLC was observed above annealing temperature of $200^{\circ}C$. Consequently, the good thermal stability of LC alignment by the UV alignment method on the DLC thin film surface can be achieved.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.1
• /
• pp.15-18
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a-C:H thin film by plasma enhanced chemical vapor deposition (PECVD) system for 30 sec under 30W rf power at a gas pressure of 1.4＊10$\^$-1/ torr. A high pretilt angle of about 5 by ion beam exposure on the a-C:H thin film surface was measured. A good LC alignment by the ion beam alignment method on the a-C:H thin film surface was observed at annealing temperature of 250$^{\circ}C$, and the alignment defect of NLC was observed above annealing temperature of 300$^{\circ}C$. Consequently, the high LC pretilt angle and the good thermal stability of LC alignment by the ion beam alignment method on the a-C:H thin film by PECVD method as working gas at 30W rf bias condition can be achieved.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.88-94
• /
• 2015

This paper reports the fabrication of a lenticular liquid crystal (LC) lens array with thermally tunable focus and with the function of a convertible lens type, using the surface structure of a UV-curable polymer and a twisted-nematic (TN) LC cell. The TN LC cell makes the LC lenticular lens function as a converging or diverging lens by controlling electrically the polarization of input light. Therefore, the focal lengths for both the converging and diverging lenses, which can be switched from the TN cell, can be tuned by changing the effective refractive index of the LC by Joule heating of the transparent electrode. As a result, the focal length of the lens with the E7 LC was changed continuously from 8.7 to 31.2 mm for the converging lens type and from -9.8 to -14.2 mm for the diverging lens when the temperature was increased from 25 to $56^{\circ}C$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.118-119
• /
• 2000

최근에 많이 사용되는 휴대용기기의 표시장치인 액정표시장치를 보면 반사형 액정표시장치가 많이 사용되고 있다. 반사형 액정표시장치는 표시장치의 전력소모의 많은 부분을 차지하는 backlight 를 주변 광원으로 대체하여 전력소모를 줄일 수 있는 표시장치로서 많이 연구되고있다. 최근에 연구되고있는 반사형 표시장치를 살펴보면 반사형 TN (Twisted Nematic) LC 모드가 주류를 이루고 있으나 콘트라스트비가 낮은 단점이 있다$^{[1]}$ . 이를 극복하기 위하여 반사형 VA (Vertical Aligned) LC 모드가 제시되어진다. VA LC 모드는 TN LC 모드와 반대로 음의 유전율 이방성을 가지는 액정물질을 이용하여 유리기판에 수직으로 배향시킨 모드로서, 전압이 인가되지 않은 초기상태에는 액정 cell 이 복굴절을 전혀 나타내지 않는다. TN LC 모드와 정확히 역의 구조를 가진다. 그리하여 초기상태에서 편광판 한 장과 광대역 λ/4 위상지연판을 사용하여 뛰어난 어두운 상태를 구현할 수가 있다. (중략)

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.902-908
• /
• 2002

Homogeneously aligned nematic liquid crystal displays (LCDs) driven by in-plane or fringe field were known to exhibit wide viewing angle and appeared to be black in the off state. However, the existence of spacers inside the cell causes the deformation of the liquid crystal molecules. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. We found that the light-leakage due to deformation of the LC director near the spacer mainly depends on the dielectric anisotropy and the ratio of elastic constants of the LC. In this paper, the mechanism on deformation of the LC near spacer is investigated by optical polarizing microscopy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.5
• /
• pp.536-540
• /
• 2004

A novel nematic liquid crystal (LC) cell with splay structure exhibiting wide viewing angle, fast response time and high transmittance at the same time has been developed. With rubbed homeotropic alignment in parallel directions, the device shows bend alignment in the absence of vertical electric field. However, with applied high voltage in a pulse form, the LC shows a optically compensated splay (OCS) orientation such that the mid-director is parallel to a substrate and at both surfaces the LCs are aligned vertically in parallel direction. In the device, the birefringence of the cell becomes tunable with applying voltage, i.e., the amount of light passed through the cell can be controlled by controlling the orientation of the LC. Since the OCS cell has a self-compensation structure such that the LC has a mirror symmetry along the mid-director, the device shows a wide viewing angle with only a single domain and a fast response time.