• The Korean Journal of Nuclear Medicine
• /
• v.20 no.2
• /
• pp.85-100
• /
• 1986

To evaluate the clinical and pathogenetic roles of TSH receptor antibodies in autoimmune thyroid diseases, TBII were measured by TSH-radioreceptor assay methods in 352 patients with Graves' disease, 108 patients with other thyroid diseases and 69 normal persons. The normal range of TBII activity was less than 15%. The frequencies of detectable TBII in 169 patients with untreated Graves' disease, 31 patients with hyperthyroidism under treatment and 70 patients with euthyrodism under treatment were 92.4%, 87.1% and 54.3% respectively. However 12 (21.8%) out of 55 patients who have been in remission more than one year after discontinuation of antithyroid drugs treatment had detectable TBII activities in their sera. In 196 patients with untreated Graves' disease, the frequency of TBII increased by increasing size of goiter and the frequency of proptosis was significantly high in patients whose TBII activities were more than 60%. TBII activities were roughly correlated with total $T_3,\;T_4$ and free $T_4$ index but low $\gamma^2$ value(less than 0.1). In 67 patients with Graves' disease who were positive TBII before antithyroid drugs treatment, TBII activities began to decrease from the third months and it was converted to negative in 35.8% of patients at 12 months after treatment. There were no significant differences of the declining and disappearing rates of TBII activities between high dose and conventional dose groups. TBII activities were significantly increased initially (2-4 months) and then began to decrease from 5-9 months after $^{131}I$ treatment. There were two groups, one whose TBII activities decreased gradually and the other did not change untill 12 months after subtotal thyroidectomy. Although preoperative clinical and laboratory findings of both groups were not different, TBII activities of non-decreasing group were significantly higher than those of decreasing group$(74.6{\pm}18.6%\;vs\;39.2{\pm}15.2%;\;P<0.01)$. Thirty three(55.9%) out of 59 patients with Graves' disease relapsed within 1 year after discontinuation of antithyroid drugs. The positive rate of TBII at the end of antithyroid drug treatment in relapse group(n=33) was significantly higher than those in remission group (n=26) (63.6% vs 23.1%; P < 0.05). The mean value of TBII activities at the end of antithyroid drug treatment in relapse group was significantly elevated $(29.7{\pm}21.4%\;vs\;14.7{\pm}11.1%,\;P<0.05)$. Positive predictive value of TBII for relapse was 77.8%, which was not different from those of TRH nonresponsiveness(78.6%). The frequencies of detectable TBII in 68 patients with Hashimoto's thyroiditis, 10 patients with painless thyroiditis and 5 patients subacute thyroiditis were 14.7%, 20% and 0%, respectively. However in 25 patients with primary nongoitrous myxedema, 11 patients(44%) showed TBII activities in their sera. 9 out of 11 patients who had TBII activities in their sera showed high TBII activities(more than 70% binding inhibition) and their IgG concentrations showing 50% binding inhibition of $^{125}I-bTSH$ to the TSH receptor were ranges of 0.1-2.6 mg/dl. One patient who had high titer of TBII in her serum delivered a hypothyroid baby due to transplacental transfer of maternal TBII. These findings suggested that 1) TSH receptor antibodies are closely related to a pathogenetic factor of Graves' hyperthyroidism and of some patients with primary non-goitrous myxedema, 2) measurement of TSH receptor antibodies is helpful in evaluating the clinical outcome of patients with Graves' disease during antithyroid drug treatment and in predicting the neonatal transient hypothyroidism of baby delivered from primary myxedema patients. 3) there are 2 or more different types of TSH receptor antibodies in autoimmune thyroid diseases including one which stimulates thyroid by binding to the TSH receptor and another which blocks adenylate cyclase stimulation by TSH.

• Korean Security Journal
• /
• no.22
• /
• pp.169-196
• /
• 2010

Although more priority is given to politicians from the aspect that they represent people and decide the future of country, the current situation is that politicians are not free from terrorism because of insufficient guard-concerned law, negative social recognition and increased crime and terrorism. The measure for politician terrorism shall be handled from the aspect of national security rather than public peace. For the purpose, basic legal foundation shall be prepared and specialized guard technique considering specialty of politician shall be established. Basic solution shall be established by reinforcing law against politician terrorism and establishing new law from the national viewpoint. The guard for politician has two faces that both of safety of guard target and voting intention of voter shall be met at the same time. Although special guard technique is required for guarding politician, current situation is that it is not researched professionally. In relation to the measure to develop the system of protection for politician, First, the study suggested legal foundation for politician guard. Although the 17th National Assembly proposed revised legal plan to protect politician from terrorism, it is suspended, expired and abolished now. The legal plan presented by members of the National Assembly was simply restricted to the scope of public guard. The study divided establishment of legal foundation into two things. The first one is the dispatch type of effective public guard and the second one is the transfer to private guard. Second, the study suggested environmental development method of politician guard. in the environment of politician guard, the study suggested improvement and development method by analyzing social recognition, politician's mind and voter's mind psychologically. After the beginning of human society, if human race is continued, political activity won't disappear. It is obvious that the safety of political leader is very important issue for human race because he plays the role to decide the future of human. In the future, more specialized, effective law shall be prepared and deeper study of scholar shall be performed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• KDI Journal of Economic Policy
• /
• v.30 no.1
• /
• pp.71-130
• /
• 2008

Using data from the Korean Labor & Income Panel Study (KLIPS), this study investigates private income transfers in Korea, where adult children have undertaken the most responsibility of supporting their elderly parents without well-established social safety net for the elderly. According to the KLIPS data, three out of five households provided some type of support for their aged parents and two out of five households of the elderly received financial support from their adult children on a regular base. However, the private income transfers in Korea are not enough to alleviate the impact of the fall in the earned income of those who retired and are approaching an age of needing financial assistance from external source. The monthly income of those at least the age of 75, even with the earning of their spouses, is below the staggering amount of 450,000 won, which indicates that the elderly in Korea are at high risk of poverty. In order to analyze microeconomic factors affecting the private income transfers to the elderly parents, the following three samples extracted from the KLIPS data are used: a sample of respondents of age 50 or older with detailed information on their financial status; a five-year household panel sample in which their unobserved family-specific and time-invariant characteristics can be controlled by the fixed-effects model; and a sample of the younger split-off household in which characteristics of both the elderly household and their adult children household can be controlled simultaneously. The results of estimating private income transfer models using these samples can be summarized as follows. First, the dominant motive lies on the children-to-parent altruistic relationship. Additionally, another is based on exchange motive, which is paid to the elderly parents who take care of their grandchildren. Second, the amount of private income transfers has negative correlation with the income of the elderly parents, while being positively correlated with the income of the adult children. However, its income elasticity is not that high. Third, the amount of private income transfers shows a pattern of reaching the highest level when the elderly parents are in the age of 75 years old, following a decreasing pattern thereafter. Fourth, public assistance, such as the National Basic Livelihood Security benefit, appears to crowd out private transfers. Private transfers have fared better than public transfers in alleviating elderly poverty, but the role of public transfers has been increasing rapidly since the welfare expansion after the financial crisis in the late 1990s, so that one of four elderly people depends on public transfers as their main income source in 2003. As of the same year, however, there existed and occupied 12% of the elderly households those who seemed eligible for the National Basic Livelihood benefit but did not receive any public assistance. To remove elderly poverty, government may need to improve welfare delivery system as well as to increase welfare budget for the poor. In the face of persistent elderly poverty and increasing demand for public support for the elderly, which will lead to increasing government debt, welfare policy needs targeting toward the neediest rather than expanding universal benefits that have less effect of income redistribution and heavier cost. Identifying every disadvantaged elderly in dire need for economic support and providing them with the basic livelihood security would be the most important and imminent responsibility that we all should assume to prepare for the growing aged population, and this also should accompany measures to utilize the elderly workforce with enough capability and strong will to work.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.503-514
• /
• 2011

In this research, the seismic connection details for two concrete-filled U-shape steel beam-to-H columns were proposed and cyclically tested under a full-scale cruciform configuration. The key connecting components included the U-shape steel section (450 and 550 mm deep for specimens A and B, respectively), a concrete floor slab with a ribbed deck (165 mm deep for both specimens), welded couplers and rebars for negative moment transfer, and shear studs for full composite action and strengthening plates. Considering the unique constructional nature of the proposed connection, the critical limit states, such as the weld fracture, anchorage failure of the welded coupler, local buckling, concrete crushing, and rebar buckling, were carefully addressed in the specimen design. The test results showed that the connection details and design methods proposed in this study can well control the critical limit states mentioned above. Especially, the proposed connection according to the strengthening strategy successfully pushed the plastic hinge to the tip of the strengthened zone, as intended in the design, and was very effective in protecting the more vulnerable beam-to-column welded joint. The maximum story drift capacities of 6.0 and 6.8% radians were achieved in specimens A and B, respectively, thus far exceeding the minimumlimit of 4% radians required of special moment frames. Low-cycle fatigue fracture across the beam bottom flange at a 6% drift level was the final failure mode of specimen A. Specimen B failed through the fracture of the top splice plate of the bolted splice at a very high drift ratio of 8.0% radian.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.1-22
• /
• 2012

The classification scheme of estuaries can be divided into two categories: qualitative classification based on geomorphic characteristics and quantitative classification based upon the physical properties of water body. While simple and intuitive scheme of the former is difficult to quantify, the latter is not easy to apply due to the lack of data. A classification scheme based on morphological convergence is very promising because it only requires easily accessible data such as width and depth of channels, as well as it can characterize estuaries in terms of tidal propagation. Thus, this paper examines the classification scheme based on estuarine morphological convergence using depth and width data obtained from 19 major Korean estuaries. Morphological convergence for each estuary was estimated with the estuarine length, width and depth data to get the convergence parameters, which includes the degree of funneling ${\nu}$ and the dimensionless estuarine length $y_0$. The transfer function ${\xi}({\nu},ky)$ is then deduced analytically from 1D depth-integrated hydrodynamic momentum equation and continuity equation for estuarine shapes. Tidal response of each estuary is finally calculated using ${\nu}$, $y_0$ and ${\xi}({\nu},ky)$ for comparison and classification. The 19 Korean estuaries were classified into three groups: tidal amplitude-dominated estuaries with standing wave-like tidal response (group 1), current-dominated estuaries with progressive wave-like tidal response (group 2), and the intermediate group (group 3) between groups 1 and 2. The sensitivity analysis revealed that uncertainties in determining the estuarine length can have a critical effect upon the results of classification, which indicates that the reasonable determination of the estuarine length is of critical importance. Once the estuarine length is feasibly determined, depth-convergence can be neglected without any negative effect on the classification scheme, which has an important ramification on the wide applicability of the classification scheme.

• Journal of Climate Change Research
• /
• v.1 no.2
• /
• pp.121-131
• /
• 2010

This study was carried out to evaluate spatial variations in rice production areas by simulating rice growth and yield with CERES-Rice growth model under GCM $2{\times}CO_2$ climate change scenarios. A modified window version(v4.0) of CERES-Rice was used to simulate the growth and development of three varieties, representing early, medium, and late maturity classes. Simulated growth and yield data of the three cultivars under the climate for 1971 to 2000 was set as a reference. Compared with the current normal(1971 to 2000), heading period from transplanting to heading date decreased by 7~8 days for the climate in $2^{\circ}C$ increase over normal, and 16~18 days for the climate in UKMO with all maturity classes, while change of ripening period from heading to harvesting date was different with maturity classes. That is, physical maturity was shortened by 1~3 days for early maturity class and 14~18 days for late maturity class under different climate change scenarios. Rice yield was in general reduced by 4.5%, 8.2%, 9.9%, and 14.9% under the climate in $2^{\circ}C$, $3^{\circ}C$, $4^{\circ}C$, and about $5^{\circ}C$ increase, respectively. The yield reduction was due to increased high temperature-induced spikelet sterility and decreased growth period. The results show that predicted climate changes are expected to bring negative effects in rice production in Korea. So, it is required for introduction of new agricultural technologies to adapt to climate change, which are, for example, developing new cultivars, alternations of planting dates and management practices, and introducing irrigation systems, etc.

• Journal of agriculture & life science
• /
• v.53 no.5
• /
• pp.127-136
• /
• 2019

Today, as the specification of pigs increases, it is important to develop eco-friendly livestock feeds that do not add antibiotics to highly utilizable materials as feed resources, and to produce functional eco-friendly pork and processed products. The purpose of this study was to establish Rubus occidentalis (RO) byproducts containing various amounts of physiologically active substances such as anticancer, anti - inflammation and antioxidant as a raw material for pig feed. The multifaceted efficacy of the RO fermented fodder (ROFF) was confirmed by the nutrient transport factors and antioxidant activity of Berkshire pigs. ROFF was added 0.3% to the general diet and the efficacy was confirmed by feeding diets to Berkshire pigs according to each weight for 43~73 days. As a result, the total cholesterol (TC), LDL-cholesterol (LDL-C) and HDL-cholesterol (HDL-C) levels were decreased or were increased in the castrated male and female Berkshire pigs but not significantly. It was confirmed that the tendency was improved in nutrition physiology. The biochemical levels of female finishing pigs were not significant but increased. In the case of finishing pigs with possibility of pregnancy, it is expected that the nutrition supply for piglet production and will help in the production of the healthy piglet. Transferrin (TFE) levels tended to increase in female growing pig and 110-150 kg finishing pigs. Thus ROFF could minimize the negative effects of iron contents deficiency in female Berkshire pigs. Glutathione peroxidase 1 (GPx1) activity was increased in castrated male and female 110-150 kg finishing pigs. Therefore, ROFF tends to improve the antioxidant capacity. The results of this study suggest that ROFF is one of the most favorable dietary sources when considering the contents of RO in feed. In particular, ROFF could have a positive effect on nutrient transport and iron content of female rather than castrated male Berkshire pigs.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.249-267
• /
• 2021

The use of big data accumulated along with the progress of digitalization is bringing disruptive innovation to the global agricultural industry. Recently, the government is establishing an agricultural big data platform and a support organization. However, in the domestic agricultural industry, the use of big data is insufficient except for some companies in the field of cultivation and growth. In this context, this study identifies factors affecting the intention to use big data in terms of technology, organization and environment, and also confirm the moderating effect of technical field, focusing on agricultural ventures which should be the main entities in creating innovation by using big data. Research data was obtained from 309 agricultural ventures supported by the A+ Center of FACT(Foundation of AgTech Commercialization and Transfer), and was analyzed using IBM SPSS 22.0. As a result, Among technical factors, relative advantage and compatibility were found to have a significant positive (+) effect. Among organizational factors, it was found that management support had a positive (+) effect and cost had a negative (-) effect. Among environmental factors, policy support were found to have a positive (+) effect. As a result of the verification of the moderating effect of technology field, it was found that firms other than cultivation had a moderating effect that alleviated the relationship between all variables other than relative advantage, compatibility, and competitor pressure and the intention to use big data. These results suggest the following implications. First, it is necessary to select a core business that will provide opportunities to generate new profits and improve operational efficiency to agricultural ventures through the use of big data, and to increase collaboration opportunities through policy. Second, it is necessary to provide a big data analysis solution that can overcome the difficulties of analysis due to the characteristics of the agricultural industry. Third, in small organizations such as agricultural ventures, the will of the top management to reorganize the organizational culture should be preceded by a high level of understanding on the use of big data. Fourth, it is important to discover and promote successful cases that can be benchmarked at the level of SMEs and venture companies. Fifth, it will be more effective to divide the priorities of core business and support business by agricultural venture technology sector. Finally, the limitations of this study and follow-up research tasks are presented.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.103-122
• /
• 2011

Recently, numerous documents have been made available electronically. Internet search engines and digital libraries commonly return query results containing hundreds or even thousands of documents. In this situation, it is virtually impossible for users to examine complete documents to determine whether they might be useful for them. For this reason, some on-line documents are accompanied by a list of keywords specified by the authors in an effort to guide the users by facilitating the filtering process. In this way, a set of keywords is often considered a condensed version of the whole document and therefore plays an important role for document retrieval, Web page retrieval, document clustering, summarization, text mining, and so on. Since many academic journals ask the authors to provide a list of five or six keywords on the first page of an article, keywords are most familiar in the context of journal articles. However, many other types of documents could not benefit from the use of keywords, including Web pages, email messages, news reports, magazine articles, and business papers. Although the potential benefit is large, the implementation itself is the obstacle; manually assigning keywords to all documents is a daunting task, or even impractical in that it is extremely tedious and time-consuming requiring a certain level of domain knowledge. Therefore, it is highly desirable to automate the keyword generation process. There are mainly two approaches to achieving this aim: keyword assignment approach and keyword extraction approach. Both approaches use machine learning methods and require, for training purposes, a set of documents with keywords already attached. In the former approach, there is a given set of vocabulary, and the aim is to match them to the texts. In other words, the keywords assignment approach seeks to select the words from a controlled vocabulary that best describes a document. Although this approach is domain dependent and is not easy to transfer and expand, it can generate implicit keywords that do not appear in a document. On the other hand, in the latter approach, the aim is to extract keywords with respect to their relevance in the text without prior vocabulary. In this approach, automatic keyword generation is treated as a classification task, and keywords are commonly extracted based on supervised learning techniques. Thus, keyword extraction algorithms classify candidate keywords in a document into positive or negative examples. Several systems such as Extractor and Kea were developed using keyword extraction approach. Most indicative words in a document are selected as keywords for that document and as a result, keywords extraction is limited to terms that appear in the document. Therefore, keywords extraction cannot generate implicit keywords that are not included in a document. According to the experiment results of Turney, about 64% to 90% of keywords assigned by the authors can be found in the full text of an article. Inversely, it also means that 10% to 36% of the keywords assigned by the authors do not appear in the article, which cannot be generated through keyword extraction algorithms. Our preliminary experiment result also shows that 37% of keywords assigned by the authors are not included in the full text. This is the reason why we have decided to adopt the keyword assignment approach. In this paper, we propose a new approach for automatic keyword assignment namely IVSM(Inverse Vector Space Model). The model is based on a vector space model. which is a conventional information retrieval model that represents documents and queries by vectors in a multidimensional space. IVSM generates an appropriate keyword set for a specific document by measuring the distance between the document and the keyword sets. The keyword assignment process of IVSM is as follows: (1) calculating the vector length of each keyword set based on each keyword weight; (2) preprocessing and parsing a target document that does not have keywords; (3) calculating the vector length of the target document based on the term frequency; (4) measuring the cosine similarity between each keyword set and the target document; and (5) generating keywords that have high similarity scores. Two keyword generation systems were implemented applying IVSM: IVSM system for Web-based community service and stand-alone IVSM system. Firstly, the IVSM system is implemented in a community service for sharing knowledge and opinions on current trends such as fashion, movies, social problems, and health information. The stand-alone IVSM system is dedicated to generating keywords for academic papers, and, indeed, it has been tested through a number of academic papers including those published by the Korean Association of Shipping and Logistics, the Korea Research Academy of Distribution Information, the Korea Logistics Society, the Korea Logistics Research Association, and the Korea Port Economic Association. We measured the performance of IVSM by the number of matches between the IVSM-generated keywords and the author-assigned keywords. According to our experiment, the precisions of IVSM applied to Web-based community service and academic journals were 0.75 and 0.71, respectively. The performance of both systems is much better than that of baseline systems that generate keywords based on simple probability. Also, IVSM shows comparable performance to Extractor that is a representative system of keyword extraction approach developed by Turney. As electronic documents increase, we expect that IVSM proposed in this paper can be applied to many electronic documents in Web-based community and digital library.