• 경영과정보연구
• /
• 제36권1호
• /
• pp.251-271
• /
• 2017

인터넷의 일반화와 더불어 신제품 개발과 관련한 아이디어의 원천을 기업 외부에서 찾는 하나의 방식으로 크라우드소싱이 많이 활용되고 있는 시점에서 본 연구는 크라우드소싱에 대한 지속적 참여의도에 미치는 참여자의 자기결정성과 동기 요인에 대한 연구를 수행하였다. 연구 결과, 크라우드소싱 참여자들의 자기결정성의 세 가지 요인인 자율성, 유능성, 관계성은 참여 동기의 내재적 동기(즐거움과 성취감)에 긍정적인 영향을 미치는 것으로 나타났다. 또한 외재적 동기인 타인으로부터의 인정과 자기결정성의 요인들이 모두 유의미한 영향을 미치는 반면 금전적인 보상의 외재적 요인에는 유의미한 영향을 미치지 않는 것으로 나타났다. 본 연구에서 크라우드소싱의 지속적 참여의도에 영향을 미치는 주요 동기요인은 내재적 동기로서의 즐거움과 외재적 동기인 타인으로부터의 인정 요인이었다. 본 연구는 크라우드소싱 참여자들의 자기결정성에 대한 욕구 충족은 내재적, 외재적 동기를 활성화시켜 지속적인 참여의도에 영향을 미친다는 것을 실증적으로 규명하였다. 그러므로 기업은 성공적인 혁신 혹은 신제품 개발을 위하여 기업 외부에 존재하는 지식을 적극적으로 흡수하기 위하여 크라우드소싱을 활용하는 것이 중요하며 대중의 적극적 참여를 통해 지속적이고 장기적인 관계를 구축함으로써 경쟁력 있는 가치를 공동으로 창출할 수 있는 시스템을 만들어야 할 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.442-442
• /
• 2008

Hydrogen was produced by water plasma excited in very high frequency inductively coupled tube reactor. Mass spectrometry was used to monitor gas phase species at various process conditions. Water dissociation rate depend on the process parameters such as ICP power, flow-rate and pressure. Water dissociation percent in ICP reactor decrease with increase of chamber pressure and $H_2O$ flow rate, while increase with increase of ICP power. In our experimental range, maximum water dissociation rate was 65.5% at the process conditions of 265 mTorr, 68 sccm, and 400 Watt. The effect of $CH_4$ addition to a water plasma on the hydrogen production has been studied in a VHF ICP reactor. With the addition of $CH_4$ gas, $H_2$ production increases to 12% until the $CH_4$ flow rate increases up to 15 sccm. But, with the flow rate of $CH_4$ more than 20 sccm, chamber wall was deposited with carbon film because of deficiency of oxygen in gas phase, hydrogen production rate decreased. The main roles of $CH_4$ gas are to reacts with O forming CO, CHO and $CO_2$ and releasing additional $H_2$ and furthermore to prevent reverse reaction for forming $H_2O$ from $H_2$ and $O_2$. But, $CH_4$ addition has negative effects such as cost increase and $CO_x$ emission, therefore process optimization is required.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1245-1251
• /
• 1999

상변화형 광디스크는 직접 반복기록에 의한 고속기록, 고밀도화가 가능하고 높은 전송속도, 재생신호의 C/N (carrier to noise) 비가 좋은 장점을 가지고 있으나 반복되는 열에너지에 의한 디스크의 변형과 소거도의 저하, 기록 반복성의 저하가 문제가 된다. 이러한 반복성의 저하를 개선하기 위해 적절한 디스크의 구조와 기록막의 상하부에 유전체 보호막인 ZnS-$SiO_2$ 박막층을 삽입하였다. 박막 제조시 많은 실험변수의 제어를 위해 다꾸찌 방법을 통하여 타겟 R.F. Power 200W, 기판 R.F. Power 20W, 아르곤 압력 4mTorr, 전극거리 6cm의 최적조건을 얻을수 있었다. TEM과 XRD분석 결과, 전극거리가 가까워질수록 높은 증착속도로 인하여 미세한 조직구조를 가지고 있으며, 일정거리 이상 가까워지면 막의 morphology에 나쁜 영향을 끼침을 알 수 있었다. 이러한 막의 morphology의 영향으로 투과율이 감소하는 것을 확인할 수 있었다. AFM과 SEM분석에서는 전극거리가 가까워질수록 높은 증착속도로 인하여 morphology에 나쁜 영향을 끼치고 있음을 확인할 수 있었다. 최적조건에서 증착한 박막은 우수한 morphology를 가진 초미세구조의 치밀하고 결함이 없는 박막이었다. 이 박막은 상변화형 광디스크에서 열적 변형을 억제하고, 열전도를 감소시켜 우수한 유전체 보호피막의 역할을 할 수 있다. 그리고, 전극거리가 ZnS결정립의 크기와 증착속도, morphology에 미치는 영향에 대해 고찰하였다.

• 전기화학회지
• /
• 제9권2호
• /
• pp.70-76
• /
• 2006

마이크로 전기화학 실험법인 비접촉식 미세방울셀이 산 용액에 노출된 저 크롬이 함유된 스테인리스강(STS 316)과 같이 젖음성이 높은 전기화학계에 사용되는데 어려움이 있었다. 음압의 인가, 방울의 크기 제어 그리고 소수성의 개스킷의 사용은 높은 젖음성을 지닌 표면에서 비접촉식 미세방울셀의 적용을 가능하게 하였다. 개선된 미세방울셀의 신뢰성을 확인하고자 3종류의 다른 계-산성염화용액과 고 크롬 페라이트 스테인리스강, 산성염화용액과 STS 316 그리고 중성염화용액과 STS 316-에 대하여 개선된 미세방울셀로 국부부식 연구를 수행하였다. 첫째 산성용액에서 고 크롬강의 양극 분극 결과는 $\alpha/\sigma$ 계면 근처에서 국부부식이 크롬 고갈층에 의한 것임을 보여주었다. 둘째 산성용액에서 STS316의 양극 분극실험이 개선된 미세방울셀에서 성공적으로 수행됨을 확인할 수 있었다. 특히, 미세방울셀에서 얻어진 국부 양극 분극곡선을 통해 STS316의 내식성에 미치는 $\delta$-라이트 영향을 밝힐 수 있었다. 마지막으로 중성염화 용액에서 STS316의 양극 분극곡선은 핏팅 저항성이 $\delta$-페라이트보다 개재물에 의존됨을 보여주었다.

• 대한간호학회지
• /
• 제28권4호
• /
• pp.1047-1059
• /
• 1998

Senile Dementia is one of the dispositional mental disorder which has been known to the world since Hippocratic age. It has become a wide-spread social problem all over the world because of chronic disease processes and the demands of dependent care for several years as well as improbability of treatment of it at the causal level. Essentially, life styles of the older generation differ from those of the younger generation. While the fomer is used to the patriarchal system and the spirit of filial piet and respect, the latter is pragmatized and individualized under the effects of the Western material civilization. These differences between the two generations cause conflict between family members. In particular, the pain and conflict of care-givers who take care of a totally dependent dementia patient not only is inciting to the collapse of the family union, but is expanding into a serious social problem. According to this practical difficulty, this study has tried to compare dementia care-givers' experiences inter-culturally and to help set up more proper nursing interventions, describing and explaining them through ethnographies by participant observation and in-depth interviews that enable seeing them in a more close, honest and certain way. It also tries to provide a theoetical model of nusing care for dementia patients which is proper to Korean culture. This study is composed of 12 participants (4 males, 8 females) whose ages range from 37-71 years. The relations of patients are 5 spouses(3 husbands, 2 wives), 4 daughters-in-law, 2 daughters, and 1 son-in-law. The following are the care-givers' meaning of experiences that results of the study shows. The first is "psychological conflict". It contains the minds of getting angry, reproaching, being driven to dispair, blaming oneself, giving up lives, and being afraid, hopeless, and resigned. The second is "physical, social and psychological pressure" . At this stage, care-givers are shown to be under stress of both body and soul for the lack of freedom and tiredness. They also feel constraint because they hardly cope with the care and live through others' eyes. The third is "isolation". It makes the relationship of patient care-giver to be estranged, without understanding each other. They, also, experience indifference such as being upset and left alone. The forth is "acceptance" They gradually have compassion, bear up and then adapt themselves to the circumstances they are in. The fifth is "love". Now they learn to reward the other with love. It is also shown that this stage contains the process of winning others' recognition. The final is "hope". In this stage they really want situations to go smoothly and hope everything will be O.K. These consequences enable us to summarize the principles of cue experience such as, in the early stage, negative response such as physical·psychological confusion, pain and conflict are primary. Then the stage of acceptance emerges. It is an initial positive response phase when care-givers may admit their situations. As time passes by a positive response stage emerges. At last they have love and hope. Three stages we noted above : however, there are never consistent situations. Rather it gradually comes into the stage of acceptance, repeating continuous conflict, pressure and isolation. If any interest and understanding of families or the support of surrounding society lack, it will again be converted to negative responses sooner or later. Otherwise, positive responses like hope and love can be encouraged if the family and the surroundings give active aids and understanding. After all, the principles of dementia care experiences neither stay at any stage, nor develop from negative stages to positive stages steadily. They are cycling systems in which negative responses and positive responses are constantly being converted. I would like to suggest the following based on the above conclusions : First, the systematic and planned education of dementia should be performed in order to enhance public relations. Second, a special medical treatment center which deals with dementia, under government's charge, should be managed. Third, the various studies approaching dementia care experiences result in the development of more reasonable and useful nursing guidelines.

• 한국산업보건학회지
• /
• 제30권4호
• /
• pp.405-411
• /
• 2020

Objectives: The objectives of this study were to investigate whether airborne fibers were released to the outside air from the asbestos removal area in buildings, and to confirm the existence of asbestos fibers in samples using transmission electron microscopy(TEM). Methods: A total of 1,295 samples was collected from inside and outside 155 asbestos removal areas. To investigate the release of asbestos fibers from the removal area, samples were collected at three locations, such as an entrance to change room, an exit of negative pressure unit(NPU) and perimeter areas. Samples were also collected in the removal area prior to and after removal activity. All samples were analyzed by phase contrast microscopy(PCM) and one-tenth of the samples was analyzed using TEM to discriminate asbestos fibers. Results: During the asbestos removal activity, 27(4.1%) of 662 samples collected outside the removal area showed airborne fiber concentrations equal to or in excess of 0.01 f/cc, the permissible emission standard of the Korean Ministry of Environment. Further, 111 samples were analyzed using TEM. The distribution of asbestos fiber concentrations was log-normal. It was found that 51 of 111 samples(46%) contained asbestos fibers. Conclusions: There is a potential risk of asbestos exposure among neighbors and the public outside the asbestos removal areas. It is recommended that the asbestos removal work be conducted strictly following the specifications required by government and/or professional organizations.

• 에너지공학
• /
• 제13권1호
• /
• pp.51-59
• /
• 2004

국내에 설치 운영중인 원전 훈련용 시뮬레이터의 핵 증기공급 계통 열수력 프로그램은 1980련 전후에 외국 벤더들이 개발하여 공급한 것으로 이들 열수력 프로그램은 핵 증기공급 계통 열수력 현상을 실시간으로 모의하기 위해 과도하게 단순화된 모델을 채택하고 있다. 그 결과 원자로 냉각계통에 복잡한 이상유동이 발생하는 사고를 모의하는 경우 정확도가 떨어질 수 있어 부정적인 훈련(Negative training)을 초래할 가능성이 있다. 이와같은 문제를 해결하기 위해 전력연구원에서는 RETRAN-3D코드를 기본으로 시뮬레이터용 핵 증기공급 계통 열수력 프로그램 ARTS코드를 개발하였다. RETRAN-3D코드를 기본으로 하는 ARTS코드는 거의 대부분의 사고를 실시간으로 모의할 수 있으며 계산의 건전성도 보장된다. 그러나, 대형냉각재 상실사고나 저압 저유속 상태의 장기 과도현상 등을 모의하는 경우에 발생하는 계산실패나 실시간 계산 지체등의 가능성이 있다. 이 경우 이를 자동으로 대체 보완할 수 있는 보조계산체계를 개발했다. 특히, ARTS코드의 실시간 계산 및 건전성 문제가 예상되는 대형냉각재 상실사고를 주모의 대상으로 간주했다. 계산 결과는 코드의 정확도, 실시간 계산능력, 건전성 및 운전원 교육등에서 최종안정성평가보고서 및 ANSI/ANS-3.5-1998$^{[1]}$ 시뮬레이터 소프트웨어 기준을 만족하는 것으로 평가되었다

• 대한방사성의약품학회지
• /
• 제1권2호
• /
• pp.123-129
• /
• 2015

$^{64}Cu$-labeled diacetyl-bis($N^4$-methylthiosemicarbazone) is a promising agent for internal radiation therapy and imaging of hypoxic tissues. In the study, we confirmed hypoxia regions in VX2 tumor implanted rabbits with injection $^{64}Cu$-ATSM and $^{18}F$-FDG using positron emission tomography (PET)/computed tomography (CT). PET images with $^{18}F$-FDG and $^{64}Cu$-ATSM were obtained for 40 min by dynamic scan and additional delayed PET images of $^{64}Cu$-ATSM the acquired up to 48 hours. Correlation between intratumoral $O_2$ level and $^{64}Cu$-ATSM PET image was analyzed. $^{64}Cu$-ATSM and $^{18}F$-FDG were intravenously co-injected and the tumor was dissected and cut into slices for a dual-tracer autoradiographic analysis. In the PET imaging, $^{64}Cu$-ATSM in VX2 tumors displayed a specific uptake in hypoxic region for48 h. The uptake pattern of $^{64}Cu$-ATSM in VX2 tumor at 24 and 48 h did not match to the $^{18}F$-FDG. Through ROI analysis, in the early phase (dynamic scan), $^{18}F$-FDG has positive correlation with $^{64}Cu$-ATSM but late phase (24 and 48 h) of the $^{64}Cu$-ATSM showed negative correlation with $^{18}F$-FDG. High uptake of $^{64}Cu$-ATSM in hypoxic region was responded with significant decrease of oxygen pressure, which confirmed by $^{64}Cu$-ATSM PET imaging and autoradiographic analysis. In conclusion, $^{64}Cu$-ATSM can utilize for specific targeting of hypoxic region in tumor, and discrimination between necrotic- and viable hypoxic tissue.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.14-14
• /
• 2011

W (tungsten)-alloys will be the most promising plasma facing armor materials in highly loaded plasma interactive components of the next step fusion reactors due to its high melting point, high sputtering resistance and low deuterium/tritium retention. The bonding technology of tungsten to Cu alloy was one of the key issues. In this paper, W/CuCrZr diffusion bonding has been performed successfully by inserting pure metal interlay. The joint microstructure, interfacial elements migration and phase composition were analyzed by SEM, EDS, XRD, and the joint shear strength and micro-hardness were investigated. The mock-ups were fabricated successfully with diffusion bonding and the cladding technology respectively, and the high heat flux test and thermal fatigue test were carried out under actively cooling condition. When Ni foil was used for the bonding of tungsten to CuCrZr, two reaction layers, Ni4W and Ni(W) layer, appeared between the tungsten and Ni interlayer with the optimized condition. Even though Ni4W is hard and brittle, and the strength of the joint was oppositely increased (217 MPa) due primarily to extremely small thicknesses (2~3 ${\mu}m$). When Ti foil was selected as the interlayer, the Ti foil diffused quickly with Cu and was transformed into liquid phase at $1,000^{\circ}C$. Almost all of the liquid was extruded out of the interface zone under bonding pressure, and an extremely thin residual layer (1~2 ${\mu}m$) of the liquid phase was retained between the tungsten and CuCrZr, which shear strength exceeded 160 MPa. When Ni/Ti/Ni multiple interlayers were used for bonding of tungsten to CuCrZr, a large number of intermetallic compound ($Ni_4W/NiTi_2/NiTi/Ni_3T$) were formed for the interdiffusion among W, Ni and Ti. Therefore, the shear strength of the joint was low and just about 85 MPa. The residual stresses in the clad samples with flat, arc, rectangle and trapezoid interface were estimated by Finite Element Analysis. The simulation results show that the flat clad sample was subjected maximum residual stress at the edge of the interface, which could be cracked at the edge and propagated along the interface. As for the rectangle and trapezoid interface, the residual stresses of the interface were lower than that of the flat interface, and the interface of the arc clad sample have lowest residual stress and all of the residual stress with arc interface were divided into different grooved zones, so the probabilities of cracking and propagation were lower than other interfaces. The residual stresses of the mock-ups under high heat flux of 10 $MW/m^2$ were estimated by Finite Element Analysis. The tungsten of the flat interfaces was subjected to tensile stresses (positive $S_x$), and the CuCrZr was subjected to compressive stresses (negative $S_x$). If the interface have a little microcrack, the tungsten of joint was more liable to propagate than the CuCrZr due to the brittle of the tungsten. However, when the flat interface was substituted by arc interfaces, the periodical residual stresses in the joining region were either released or formed a stress field prohibiting the growth or nucleation of the interfacial cracks. Thermal fatigue tests were performed on the mock-ups of flat and arc interface under the heat flux of 10 $MW/m^2$ with the cooling water velocity of 10 m/s. After thermal cycle experiments, a large number of microcracks appeared at the tungsten substrate due to large radial tensile stress on the flat mock-up. The defects would largely affect the heat transfer capability and the structure reliability of the mock-up. As for the arc mock-up, even though some microcracks were found at the interface of the regions, all microcracks with arc interface were divided into different arc-grooved zones, so the propagation of microcracks is difficult.

• 생명과학회지
• /
• 제22권11호
• /
• pp.1456-1462
• /
• 2012

소라페닙은 멀티카이네즈 억제제로서 신세포암, 전이성 간세포암 환자의 치료에 효과가 입증된 경구용 항암제이다. 이 연구의 목적은 고속액체크로마토그래피 텐덤질량분석기법(LC/MS/MS)을 이용하여 사람 혈장 내 소라페닙의 농도를 측정하는 효율적인 방법을 개발하고 한국식품의약품안전청(KFDA) 기준에 따라 분석법을 검정하는 것이다. 혈장시료($100{\mu}l$)에 내부표준물질인 chlorantraniliprole을 첨가한 후 이소프로필알콜과 에틸아세테이트로 구성(1:4, v/v)된 0.1% 포름산 함유 추출용액을 혼합하였다. 원심분리 후 상층액을 취하여 원심감압농축하였다. 잔사를 이동상에 재용해하고 Waters사의 역상 XTerra$^{TM}$ C18 칼럼(입자크기 $3.5{\mu}m$)을 장착한 고속액체크로마토그래피 장치에 주입하였다. 액체크로마토그래피는 0.1% 포름산과 10 mM 암모늄 포메이트를 함유한 버퍼용액과 메탄올, 아세토나이트릴을 각각 1:6:3으로 혼합한 용액을 이동상으로 사용하였으며 5분 내에 측정을 완료하였다. 분석대상 물질들은 텐덤질량분석기에서 electrospray 양이온 이온화($ES^+$) 검출방식으로 확인하였으며 소라페닙은 'm/z 465.2 ${\rightarrow}$ 252.5', chlorantraniliprole은 'm/z 484.4 ${\rightarrow}$ 286.2'으로 구성한 multiple reaction monitoring 방법을 사용하였다. 검정 결과, 2-5,000 ng/ml의 농도 구간에서 양호한 직선성($r^2$ > 0.99)과 정확도(90.7-103.9%), 정밀도(10% 이하)를 나타내었다. 새롭게 개발된 LC/MS/MS을 이용한 사람 혈장 내 소라페닙의 농도 측정법은 KFDA 기준을 만족하였으며, 기존의 방법에 비해 민감도가 높은 방법이었다.