• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.198-201
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a SiO thin film. The homogenous alignment can be obtain어 using ion beam (IB) exposure on the SIO thin film, when positive type NLC ($Delta\varepsilon$>0) was injected However, the homeotropic alignment can be obtained using ion beam (IB) exposure on the SiO thin film, when negative type NLC ($\Delta\varepsilon$>0) was injected The LC aligning ability on the SiO thin film depends on the dielectric anisotropy type of LC. It will be discussed.

• 한국정보통신학회논문지
• /
• 제16권7호
• /
• pp.1512-1517
• /
• 2012

본 논문에서는 Guest-Host 디스플레이의 문제점인 낮은 명암대비비를 해결하기 위해서 음전하로 대전 된 흑색입자를 이용한 고성능 하이브리드 Guest-Host 디스플레이를 제안하였다. 우리는 패턴 된 전극구조의 설계로 전압에 따른 입자의 스위칭을 고려하였으며, 염료 및 입자의 혼합비를 최적화하여 전기광학특성을 향상 시켰다. 따라서 기존 Heilmeier Guest-Host 디스플레이에 비교하여 dark 특성을 80%이상 향상시켰으며, 명암대비비를 비교분석함으로써 제안 된 모드의 성능 우수성을 검증하였다.

• 폴리머
• /
• 제28권4호
• /
• pp.298-304
• /
• 2004

유전율 이방성이 음인 액정과 UV 경화용 단량체를 사용해 초기에 투명한 상태인 고분자 분산형 액정 (PDLC)셀을 제작하였고 그 셀의 전기 광학 특성을 연구하였다. 액정과 단량체의 비율이 70/30 wt%, 2$0^{\circ}C$의 노광 온도, 198㎽/$\textrm{cm}^2$ 의 노광 세기에서 만들어진 셀이 명암 대비율이 가장 우수하였다. 이 조건에서 만들어진 초기에 투명한 상태를 나타내는 고분자 분산형 액정 셀은 종래 PDLC 셀과 달리 액정들이 초기에 수직 배향막에 의해 기판에 수직으로 서게 되고 노광에 의해 중합된 고분자는 액정의 배열에 영향을 크게 미치지 않아 전압 인가 전에는 입사 된 빛이 통과하게 된다. 전압인가 시에는 전기장에 액정들이 기판에 수직 방향으로 누우면서 고분자와 액정의 굴절을 차이를 만들어내고 이는 입사된 빛을 산란시킨다. 또한 이러한 초기에 투명한 상태를 나타내는 PDLC 셀은 기존의 초기에 산란을 일으키는 PDLC 셀보다 우수한 시야각 특성을 보여주었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1054-1057
• /
• 2003

We have studied $90^{\circ}$ twisted nematic (TN) mode driven by fringe electric field, where two polarizers are parallel each other such that the cell shows a black state before a voltage is applied. According to the studies by computer simulation for a LC with negative dielectric anisotropy, the LC twists perpendicular to the horizontal field direction of fringe electric field and the degree of tilt angle is very low, when a voltage is applied. Therefore, the new device exhibits wide viewing angle characteristic due to in-plane switching and high transmittance since the LC director aligns parallel to the polarizer axis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.162-162
• /
• 2009

Optical bounce which occurs by over twist of the liquid crystal (LC) director has a problem of response time in fringe-field switching (FFS) modes. After removing the electric field, effective birefringence ($d{\Delta}n_{eff}$) at the edge of pixel electrode meets the $\lambda/2$ phase instantly, since tilt angle of LC directors at that position suddenly decreases compared to twist angle. In this paper, based on the careful analysis, origin of optical bounce has been explained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.137-140
• /
• 2000

Synthesis of a new copoly (M4Ch-ChMA), copoly ((4-methacryloyloxy) chalcone-cholestery methacrylate), with chalconyl and cholesterol moiety characteristics for photoalignment materials was investigated. Good thermal stabilities of the synthesized copolymers are confirmed by thermogravimetric analysis (TGA) measurement. The pretilt angles of the nematic liquid crystal (NLC) are reduced as UV exposure time is increased on the copolymer surfaces. A pretilt angle of 81$^{\circ}$in NLC was observed with UV exposure of 3 min on the copolymer-3 surface. The NLCs pretilt angle is attributable to increased chalcone with increasing the UV exposure time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.49-50
• /
• 2006

We have developed vertical alignment liquid crystal display (VA-LCD), of which the viewing angle can be controlled. The VA-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using one homogeneous aligned (HA) LC layer and one compensation film with a negative C-plate. The retardation of the HA layer at off axis can be controlled by applying an electric field while keeping the retardation value to be zero at normal direction. Consequently, the device exhibits a viewing mode over $170^{\circ}$ in terms of CR = 10 in wide viewing mode and about $60^{\circ}$ in terms of CR = 2 in narrow viewing angle mode m horizontal direction.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1580-1583
• /
• 2008

We propose an optical configuration for a vertical alignment (VA) liquid crystal (LC) cell to eliminate the off-axis light leakage in the dark state. The proposed compensation configuration consists of a positive A-film, a positive C-film and a negative C-film. The optical design is performed on a Poincar$\acute{e}$ sphere. This configuration has a better tolerance to the wavelength dispersion, as the polarization trace could self-compensate it. From calculations, we show that the proposed VA LC cell can improve the viewing angle characteristics by compensating for the light leakage in the diagonal direction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.999-1002
• /
• 2003

Electrooptical (EO) characteristics of a new multidomain vertical-alignment (MVA) liquid crystal display (LCD) with negative dielectric anisotropy on a homeotropic photopolymer were studied. Good voltage-transmittance (V-T) curves of the new MVA-LCD on the homeotropic photopolymer were obtained. Also, the stable response time of the new MVA-LCD on the homeotropic photopolymer was achieved. The viewing angle of the new MVA-LCD could be improved by a crossed stripe grating-groove surface as the alignment layer using a photolithograph method on the photopolymer.