• Title/Summary/Keyword: necessity measure

Search Result 234, Processing Time 0.031 seconds

A Methodology of Radiation Measurement of MOSFET Dosimeter (MOSFET 검출기의 방사선 측정 기법)

  • Lho, Young-Hwan;Lee, Sang-Yong;Kang, Phil-Hyun
    • Proceedings of the IEEK Conference
    • /
    • 2009.05a
    • /
    • pp.159-162
    • /
    • 2009
  • The necessity of radiation dosimeter with precise measurement of radiation dose is increased and required in the field of spacecraft, radiotheraphy hospital, atomic plant facility, etc. where radiation exists. Until now, a low power commercial metal-oxide semiconductor(MOS) transistor has been tested as a gamma radiation dosimeter. The measurement error between the actual value and the measurement one can occur since the MOSFET(MOS field-effect transistor) dosimeter, which is now being used, has two gates with same width. The measurement value of dosimeter depends on the variation of threshold voltage, which can be affected by the environment such as temperature. In this paper, a radiation dosimeter having a pair of MOSFET is designed in the same silicon substrate, in which each of the MOSFETs is operable in a bias mode and a test mode. It can measure the radiation dose by the difference between the threshold voltages regardless of the variation of temperature.

  • PDF

A Study on the Dynamic Fracture Toughness of Welding Structural Steels by Instrumented Impact Testing (계장화 충격시험법에 의한 구조용강 용접부의 동적 파괴인성에 관한 연구)

  • 김헌주;김경민;윤의박
    • Journal of Welding and Joining
    • /
    • v.11 no.1
    • /
    • pp.42-51
    • /
    • 1993
  • In this study, investigations were conducted in calculating parameters of elastic-plastic fracture mechanics using single specimen. The validity of these testing methods was judged by the confirmation of multiple specimen method of stop block test. The results were as follows: In order to measure a fracture toughness using the instrumented impact test, two general requirement must be considered; One, setting up proper impact velocity considered the effect of loading and the other, the necessity of low blow test for obtaining true energy by the compliance correction. It was possible to detect a crack initiation point by calculating the compliance changing rate from a load-defection curve. Criterion of a stable crack growth, $T_{mat}$ could be estimated by using key-curve method for a base metal. and combining Kaiser's rebound compliance with Paris-Hutchison's $T_{appl}$ equation for the brittled zone of welding heat affected.at affected.d.

  • PDF

A Study on Unsteady Thermal Loading of Hydrogen Engine with Dual Injection (이중분사식 수소기관의 비정상 열부하 해석에 관한 연구)

  • Wei, Shin-Whan;Kim, Yun-Young;Kim, Hong-Jun;Lee, Jong-Tai
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.12 no.2
    • /
    • pp.147-155
    • /
    • 2001
  • To measure of thermal loading in the combustion chamber of hydrogen engine with dual injection, instantaneous wall-surface temperature and unsteady heat flux of the cylinder head are measured and analyzed. The maximum wall surface temperature is shown in direct injection region which has large heat supplied. Partial and spatial temperatures have slight deviation in transient region of injection, though injection method change suddenly. All of thermal characteristics such as instantaneous temperature, temperature swing and heat flux of hydrogen engine with dual injection are remarkably higher than those of gasoline engine. It means necessity of additional countermeasure of thermal loading.

  • PDF

A study on data security in CDMA system (CDMA 이동통신망에서의 데이타 비도에 관한 연구)

  • 김지홍;이만영
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.21 no.3
    • /
    • pp.692-697
    • /
    • 1996
  • In this paper, we measure data security in CDMA system. If we know the [42/4]${\times}4$+[42/4]${\times}4$ bits of output sequences of key stream generator, we can find log code mask bits and orthogonal output sequences. So this paper showes us the necessity of data security algorithm in CDMA system.

  • PDF

A Study of Gait and Gait Analysis Techniques (보행과 보행분석법에 관한 연구)

  • Bae Sung-Soo;Lee Jin-Hee;Yoon Chang-Goo
    • The Journal of Korean Physical Therapy
    • /
    • v.8 no.1
    • /
    • pp.49-64
    • /
    • 1996
  • The technology of gait analysis is moving rapidly. Human gait is very complex, and a through understanding of it demands with the basic principles of biomechanics and the technology used to measure gait. Some professionals reluctance to use gait analysis may be due to the amount of time and effort necessary to accomplish this and the necessity for teamwork among the disciplines involved. Any form of observational gait analysis has limited precision and is more descriptive than quantative. The techniques of 3-D kinetic and kinematic analysis can provide a detailed biomechanical description of normal and pathological gait. This article review gait characteristics and procedures that are available for gait analysis. We are certain that, given the steady advance of technology and our continued efforts to document the benefits of that technology. gait analysis will soon be a routine part of the evaluation of both the elite athlete and the physically impaired adult or child.

  • PDF

A study on the Longitudinal Force Variation of CWR according to the Condition of Track Maintenance (궤도보수 작업 조건별 장대레일 축력변화에 관한 연구)

  • Won, Yong-Hoan;Kim, Kwan-Hyung;Kwon, Soon-Jung;Lee, Seung-Youl
    • Proceedings of the KSR Conference
    • /
    • 2009.05a
    • /
    • pp.99-105
    • /
    • 2009
  • This research presents the method to decide proper locations for destressing of CWR using a non-destructive equipments to measure the longitudinal force(installation temperature) in CWR. The effect and necessity of destressing were analyzed by estimating changes of longitudinal force. The installation temperature was measured to find changes of longitudinal force in high speed and conventional lines before and after destressing or track maintenance at the locations where destressing was planed or where change of longitudinal force was expected during track maintenance. Past destressing was carried out within qualitative decision criteria. This research proposes the quantitative criteria to decide the priority order of the destressing locations reasonably by considering the difference of air temperature and stress free temperature during the track maintenances, the grade of ballast resistance force recovering and the length of destressing, etc.

  • PDF

An Analysis of the Evolution of a Fuzzy Logic Controller using Evolutionary Activity (진화활동성을 이용한 퍼지 제어기의 진화 분석)

  • 이승익;조성배
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2001.05a
    • /
    • pp.113-116
    • /
    • 2001
  • This paper analyzes the evolutionary process of a fuzzy logic controller using evolutionary activity. An evolutionary algorithm is commonly used to find solutions for given problems. However, little has been done on the analysis of the evolutionary pathways to the optimal solutions. This paper uses a genetic algorithm to construct a fuzzy logic controller for a mobile robot and applies evolutionary activity to measure the adaptability quantitatively. Evolutionary activity can be defined as the rate at which useful genetic innovations are absorbed in the population. By measuring the evolutionary activities, we will show quantitatively that the optimal fuzzy logic controller is not from other genetic phenomena like chance or necessity, but from the adaptability to a given encironment.

  • PDF

A Case Study about Managing Waiting Time for Raising Customer's Satisfaction in the Medical Service (의료서비스에서 고객 만족도 제고를 위한 대기시간 관리에 관한 사례 연구)

  • Park, Chan-Kwon;Kwag, Eun-Jwoo
    • Korea Journal of Hospital Management
    • /
    • v.14 no.3
    • /
    • pp.132-153
    • /
    • 2009
  • The waiting time makes the customer be bored, and is the reason to obstruct the service quality evaluation. The managing waiting time appears to be the most important task, in accordance of physical inconvenience especially because the customers of the medical service are supplied in the unstabled status. Therefore, necessity and object of managing waiting time in the medical service were presented through the definition of waiting time and the consideration about preceding study, and the main cause of the waiting time was analyzed, furthermore the measure of actually indicated waiting time and various ideas for reducing the time were presented lastly as selecting a case study participative hospital for achieving the study object. This study will be one of role model as a solution to reduce the waiting time in each medical institution.

  • PDF

Measuring Industry Regulations Using an Agent-based Model: The Case of Online Games in Korea

  • Taekyung Kim;Seongmin Jeon;Jongil Kim
    • Asia pacific journal of information systems
    • /
    • v.29 no.2
    • /
    • pp.165-180
    • /
    • 2019
  • As game industry prospers, the negative side of games becomes highlighted as well as its contributions to economy growth. In spite of strong arguments for the necessity to regulations as a means to decrease addiction or overindulgence, research has produced future suggestions rather than quantifiable evidence. In this paper, we propose adopting a simulation approach in addition to quantitative approaches to better understand optimal regulatory levels since a simulation approach can visualize unexpected side effects of regulations. In this study, we suggest the application of an agent-based model (ABM) as a smart service to measure the effects of regulatory policies. We review cases applying ABM in various domains and consider the possibility of using an ABM to understand the effectiveness of web board-game regulations. We find that the ABM approach would be useful in several areas, such as the analysis of regulatory effects that reflect a variety of characteristics, the measurement of micro-regulatory effects, and the simulation of regulations.

Northeast Asia in Russia's Pivot to the East (СЕВЕРО-ВОСТОЧНАЯ АЗИЯ В ПОВОРОТЕ РОССИИ НА ВОСТОК)

  • Kanaev, Evgeny
    • Analyses & Alternatives
    • /
    • v.1 no.1
    • /
    • pp.44-64
    • /
    • 2017
  • Russia's push in the Asia-Pacific region stems from its interests that have the national, regional and global dimensions. In their turn, the aims of this policy are civilizational, geopolitical, economic and prospective, with a long-term outlook. In the course of their achievement, cooperation with Northeast Asia's countries will play one of the key roles owing to the factors of geographic proximity, Northeast Asia's economic potential, risk hedging and a growing influence Northeast Asia exerts upon the global development. A new cooperation paradigm between Russia and the states of Northeast Asia should be based upon establishing and cementing self-reproducing ties. This is the central aim of Russian initiatives in relations, with Japan, the Republic of Korea, Democratic People's Republic of Korea, Mongolia and China. However, numerous obstacles ranging from Russia's absence in the regional free trade agreements and supply-production chains of value-added production to the permanent international instability generated by Pyongyang's missile-nuclear developments hamper the practical implementation of this task. Realizing the necessity to give an additional impetus to this new cooperative paradigm, Russia has to develop directions with an apparent consolidating effect. The most promising may be the establishment of a permanent security forum based upon Northeast Asia Peace and Security Mechanism chaired by the Russian Federation. The urgency of this measure and its expected support stem from the necessity to strengthen security in Northeast Asia, a task neither the US-led hub-and-spoke system nor ASE-AN-led multilateral dialogue venues have been able to resolve. The issues addressed at the security forum must include the unification of approaches to North Korean nuclear issue and producing a document specifying actions of the claimants on the disputed maritime territories in the "direct contact" situations. At the expert level, Russia has elaborated on the idea to establish such a forum outlining the spectrum of the key directions of cooperation. With the urgency in the establishment of this dialogue venue, its agenda has to be coordinated with the agendas of the existing security systems presented by the US alliances and the ASE-AN-led multilateral negotiations. The practical implementation of this initiative will strengthen security in Northeast Asia as its challenges will be resolved in the pre-emptive way based on coordinated approaches. Therefore, Russia as the Eurasian state will be one of the role players in the advent of the Asian century.

  • PDF