• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.1093-1096
• /
• 2002

In this paper, a new semi-automated cyber character generating method is presented. Local edge detection tools extract face contour from graphic image files. Some graphic manipulation process detailed touch to obtain neat face contour. This method shortens the making process dramatically while maintaining the good quality similar to real face image. Some of the processed images are illustrated for clear explanation.

• Journal of the Korean Magnetic Resonance Society
• /
• v.12 no.1
• /
• pp.60-64
• /
• 2008

Cross-polarization (CP) signals were observed even from liquid samples such as neat toluene. Therefore, CP signals of liquid molecules in the presence of high surface materials do not necessarily mean the molecules are adsorbed on solid surface, especially when no signal from the tertiary observing nuclei such as carbons of the molecules is detected.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.5
• /
• pp.252-255
• /
• 2012

In order to characterize insulation properties of epoxy/micro-silica/nano-silicate composite (EMNC), long-term and short-term AC treeing tests were carried out undr non-uniform electric field generated between needle-plate electrodes. In a long-term test, a 10 kV (60 Hz) electrical field was applied to the specimen positioned between the electrodes with a distance of 2.7 mm in an insulating oil bath at $30^{\circ}C$, and a typical branch type electrical tree was observed in the neat epoxy resin and breakdown took place at 1,042 min after applying the 10 kVelectrical field. Meanwhile, the spherical tree with the tree length of $237{\mu}m$ was seen in EMNC-65-0.3 at 52,380 min (36.4 day) and then the test was stopped because the tree propagation rate was too low. In the short-term test, an electrial field was applied to a 3.5 mm-thick specimen at an increasing voltage rate of 0.5 kV/s until breakdown in insulating oil bath at $30^{\circ}C$ and $130^{\circ}C$, and the data was estimated by Weibull statistical analysis. The electrical insulation breakdown strength for neat epoxy resin was 1,763 kV/mm at $30^{\circ}C$, while that for EMNC-65-0.3 was 2,604 kV/mm, which was a modified value of 47%. As was expected, the breakdown strength decreased at higher test temperatures.

• Journal of Korean Academy of Nursing Administration
• /
• v.5 no.2
• /
• pp.369-388
• /
• 1999

This study is a descriptive research to establish a positioning strategy of nursing service image, making a perception map on each hospital's nursing service image and ranking construct factors of nursing service image. The results in this study were as follows; 1. The rank of construct factors of nursing service image which were thought important by subjects was the first 'Kindness', the second 'Reliability', the third 'Professional Knowledge', the fourth 'Responsibility', and the fifth 'Advanced Nursing Skill'. 2. The perception map for nursing service image on each hospital showed a hierarchial structure and positioned the first B hospital, the second C hospital, the third D hospital, the fourth A hospital, and the fifth E hospital. The perception map for construct factors of nursing service image and hospitals showed the first dimension : 'Reliability', the second dimension : Kindness', the third dimension : 'Mission', 'Accuracy', 'Neat Appearance', and 'Ethical Aspect', and the fourth dimension : 'Client Advocate', 'Humanistic Consideration', 'Professional Knowledge', 'Responsibility', and 'Advanced Nursing Skill'. 3. The findings of subject's characteristics which affected degree of likeness on each hospital nursing service image to make a marketing strategy were as follows : In A hospital D hospital, and E hospital, the subject group whose hospital dates were under 1 week, education level was upper graduate university, and age was between 40's and 50's, were appeared to have low nursing service image on following construct factors : 'Kindness', 'Reliability', 'Responsibility', 'Mission', 'Neat Appearance', and 'Humanistic Consideration'. In B hospital and C hospital the subject group whose hospital dates were under 1 week or over 5 weeks, sex was woman, and age was 20' s or 40's, having a admission experience on subject hospitals, were appeared to have low nursing service image on following construct factors : 'Professional Knowledge', 'Advanced Nursing Skill', 'Ethical Aspect', and 'Humanistic Consideration'. As the based on above results, nursing managers can use positioning method to develope a marketing strategy for nursing service image.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.109-113
• /
• 2002

Interfacial and electrical properties for the carbon fiber reinforced epoxy-amine terminated (AT) PEI composites were performed using microdroplet test and electrical resistance measurements. As AT PEI content increased, the fracture toughness of epoxy-AT PEI matrix increased, and IFSS was improved due to the improved toughness and energy absorption mechanisms of AT PEI. The microdroplet in the carbon fiber/neat epoxy composite showed brittle microfailure mode. At 15 wt% AT PEI content, ductile microfailure mode appeared because of improved fracture toughness. After curing, the changes of electrical resistance (ΔR) with increasing AT PEI content increased gradually because of thermal shrinkage. The matrix fracture toughness was correlated to IFSS, TEC and electrical resistance. In cyclic strain test, the maximum stress and their slope of the neat epoxy case were higher than those of 15 wt% AT PEI. The results obtained from electrical resistance measurements under curing process and reversible stress and strain were consistent well with matrix toughness properties.

• Composites Research
• /
• v.24 no.2
• /
• pp.30-37
• /
• 2011

Analysis of wettability between epoxy resin and glass fabric was studied. The mixing ratios of epoxy resin and anhydride hardener were varied as 1:0.5, l:l and l:1.2. Catalyst content was fixed as 0.1wt% of the mixed resin. A curing analysis by differential scanning calorimeter(DSC) showed a possible impregnation of the mixed resin at the room temperature. An effective contact angle of the mixed epoxy resin drop onto the glass fabric being preset on a flat glass plate was measured as a function of time. The wet area of the epoxy resin drop was also measured. Behaviors of the contact angle, the droplet height, the neat wet area and the coefficient of wettability were used to evaluate the wettability of the epoxy resin onto the glass fabric. It was concluded that the equivalent ratio of 1: 1.2 was the most suitable for the wettability.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.421-428
• /
• 2007

This paper investigates the combustion and emission characteristics of a compression ignition engine fueled with neat and blended Shell's gas-to-liquid (GTL) fuel, which was derived from natural gas through the Fischer-Tropsch process. The experiments were conducted in a 6-cylinder DI diesel engine with pump timing settings of $6^{\circ},\;9^{\circ}\;and\;12^{\circ}$crank angle before TDC over ECE R49 and US 13-mode cycles separately and compared to a conventional diesel fuel. The results show that GTL exhibited almost the same power and torque output, improved fuel economy and effective thermal efficiency. It was found that GTL displayed lower peak in-cylinder combustion pressure and maximum heat release rate (HRR), the timings of the peak pressure and the maximum HRR were generally delayed, and the combustion durations were almost equivalent for diesel and GTL under the same speed-load condition. The results also indicate that, compared to diesel fuel, GTL blends showed a trend forward decreasing four regulated emissions simultaneously and a higher GTL fraction in blends contributing to further reductions in the emissions. In particular and on average, neat GTL significantly reduced HC, CO, NOx and PM by 16.4%, 17.8%, 18.3% and 32.4%, respectively, for all cases.

• Korean Journal of Animal Reproduction
• /
• v.12 no.2
• /
• pp.112-119
• /
• 1988

These studies were conducted to investigate the effects of culture temperature and time on the in vitro maturation and semen type and media on the in vitro fertilization of bovine follicular oocytes, and to asses in vitro fertilization rate of oocytes cultured by extraffollicular method following fertilization in vitro, or transfer into the pseudopregnant rabbit oviduct or uterus. The bovine oocytes recovered from follicles were cultrued for 18 hrs or 72hrs at 38$^{\circ}C$ with 5% CO2 in moist air. Flesh-diluted(2 folds) and frozen-thawed semen in 0.5ml straw from a fertile bull were used. In order to obtain capacitation of spermatozoa were treated with bovine follicular fluids(BFF) and Inophore A(IA). The results obtained were summarized as follows: 1. The oocytes were classified as "A, B, C, D and Degenerative" depending morphological integrity and those were 62.0%, 12.0%, 17.2%, 5.9% and 3.0% of the total oocytes harvested, respectively. 2. The oocytes matured to metaphase II were significantly increased between 24-48hrs of incubation and at 37-39$^{\circ}C$ with 5% CO2 in moist air. 3. The in vitro fertilization rate following transferred into rabbit oviduct or uterus with bull semen and in vitro matured oocytes were higher ligation than non-ligation of oviduct or uterus. 4. The in vitro fertilization rate of oocytes matured in vitro were higher neat than frozen semen and treatment of IA than BFF on the capacitation of spermatozoa. 5. The effects of semen types and media on in vitro fertilization of oocytes matured in vitro were higher fertilization rate of neat than friozen semen, and media was not significant.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.292-301
• /
• 1996

The synthesis of poly(ether)tailed bipyridine complex as redox reaction probes has advanced attempts to interpret very slow diffusion and heterogeneous electron transfer. Diffusion coefficients as low as $1.5{\times}10^{-15}cm^2/s$ have been observed for the oxidation of neat $Co(bpy(ppgm)_2)_{3^-}(ClO_4)_2$ with $LiClO_4$ electrolyte. Heterogeneous electron transfer rate constants of materials were found to vary with diffusion coefficient. The decrease in k as the diffusion coefficient decreases was actually caused by the decreasing D. Diffusion coefficient for compound of strong ion pairing anion($ClO{_4}^-$) was much smaller than the diffusion coefficient for compound of weak ion pairing anion($CF_3COO^-$).

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.410-417
• /
• 2003

Poly(methyl methacrylate-co-acrylonitrile) [P(MMA-co-AN)]/Na-MMT nanocomposites were synthesized through emulsion polymerization with pristine Na-MMT. The nanocomposites were exfoliated up to 20 wt% content of pristine Na-MMT relative to the amount of MMA and AN, and exhibited enhanced storage moduli, E', relative to the neat copolymer. The exfoliated morphology of the nanocomposite was confirmed by XRD and TEM. 2-Acryla-mido-2-methyl-1-propane sulfonic acid (AMPS) widened the galleries between the clay layers before polymerization and facilitated the comonomers, penetration into the clay to create the exfoliated nanocomposites. The onset of the thermal decomposition of the nanocomposites shifted to a higher temperature as the clay content increased. By calculating areas of tan$\delta$ of the nanocomposites, we observed that the nanocomposites show more solid-like behavior as the clay content increases. The dynamic storage modulus and complex viscosity increased with clay content. The complex viscosity showed shear-thinning behavior as the clay content increased. The Young's moduli of the nano-composites are higher than that of the neat copolymer and they increase steadily as the silicate content increases, as a result of the exfoliated structure at high clay content.