• Journal of Yeungnam Medical Science
• /
• v.14 no.2
• /
• pp.467-473
• /
• 1997

South Korea has been free from endemic malaria by P. vivax since the mid-1980s, but malaria infections, including military outbreak in 1995, have been increasing steadily in the soldiers serving near the western part of Demilitarized Zone(DMZ) since its first resurgence in 1993. We experinced 8 cases of delayed onset P. vivax malaria in young men who had never been abroad and had no history of blood transfusion or parenteral use of drug. All the patients had served near the western part of DMZ during their military life. They were admitted to Yeungnam University hospital due to cyclic fever with chills and the clinical symptoms were developed 2 months to 11months after discharge from military service. Peripheral blood smears showed typical ring forms and trophozoites of P. vivax in red blood cell. Patients were treated with hydroxychloroquine and primaquine showing rapid clinical and hematologic responses in all cases, but 2 cases were relapsed later. We presumed that theses cases were delayed onset of P. vivax infection resulted from the recent outbreak in the western part of DMZ, in 1995. Therefore, we reported theses cases to emphasize the need of active surveillance and prevention.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.605-613
• /
• 2013

This research proposes a vibration pattern algorithm to implement the haptic joystick to control a mobile robot at the remote site without watching the navigation environment. When the user cannot watch the navigation environment of the mobile robot, the user may rely on the haptic joystick solely to avoid obstacles and to guide the mobile robot to the target. To generate vibration patterns, there is a vibration motor at the bottom of the joystick which is held by the user to control the motion direction of the mobile robot remotely. When the mobile robot approaches to an obstacle, a pattern of vibration is generated by the motor, and by feeling the vibration pattern which is determined by the relative position of the mobile robot to the obstacle, the user can move the joystick to avoid the collision to the obstacle for the mobile robot. To generate the vibration patterns to convey the relative location of the obstacle near the mobile robot to the user, Fuzzy interferences have been utilized. To measure the distance and location of the obstacle near the mobile robot, ultrasonic sensors with the ring structure have been adopted and they are attached at the front and back sides of the mobile robot. The precise location of the obstacle is obtained by fusing the multiple data from ultrasonic sensors. Effectiveness of the proposed algorithm has been verified through the real experiments and the results are demonstrated.

• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2013

In this study, growth-line analysis was carried out on the hard clam (Meretrix petechialis) collected from the Neolithic shell middens in Daejuk-ri, Seosan, Korea, to reconstruct palaeoenvironment. Growth increments of 206 specimens of the clam were examined. The ages of the specimens were determined from the rings on the shells. The relationship between shell length and ring radius in each ring group was expressed as a regression line, indicating a correspondence in each ring formation. Growth pattern of the midden specimens was compared to that of modern ones collected from Gimje, Jeonbuk. Growth curves for shell length fitted to the von Berta anffy's growth curve were expressed respectively as follows: $SL_t=102.9025[1-e^{-0.18657(t+1.0906)}]$ in the shell midden specimens, $SL_t=104.2583[1-e^{-0.2277(t+0.7499)}]$ in the modern ones. The relationship between shell length (SL; mm) and shell height (SH; mm) was expressed by the following equations: SH = 0.7791 SL + 3.6636 ($R^2$ = 0.946) in the midden specimens, SH = 0.8103 SL + 0.5145 ($R^2$ = 0.991) in the modern ones. The results of the tests regarding the differences between regression coefficients and elevations of growth curves of these two populations demonstrate that the slopes were not significantly different (p < 0.05), but the elevations were (p > 0.05). However, overall growth curves of the midden and modern populations were not significantly different, indicating that shell growth environments of the two areas are similar. Therefore, it is likely that sea temperature near the midden area could be similar to that of present Gimje area, and thus temperature during the period of the midden formation could be higher than presently known.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.2
• /
• pp.143-149
• /
• 2016

Eruptive volumes of three monogenetic volcanoes (Songaksan tuff ring, Biyangdo scoria cone, and Ilchulbong tuff cone) with the youngest eruption age are calculated using the model, applied to Auckland Volcanic Field in New Zealand, to investigate the volcanic eruption scale and to evaluate volcanic hazard of Jeju Island. Calculated eruptive volumes of the volcanoes are $24,987,557m^3$, $9,652,025m^3$, and $11,911,534m^3$, respectively, and the volumes include crater infill, tuff ring (tuff cone), scoria cone, and lava flow. Volcanic explosivity indices of Songaksan tuff ring, Biyangdo scoria cone, and Ilchulbong tuff cone are estimated based on the eruptive volumes to be 3, 2, and 3 respectively, and eruption type is Strombolian to Surtseyan. It is assumed that the amount of emitted sulfur dioxide gas is $2-8{\times}10^3kt/y$ according to the correlation between volcanic explosivity index and volcanic sulfur dioxide index. Recent age dating researches reveal evidences of several volcanic activities during the last 10,000 years indicating the possible volcanic eruption in Jeju Island in the near future. Therefore, it is necessary for appropriate researches regarding volcanic eruption of the island to be accomplished. In addition, establishment of the evaluation and preparation system for volcanic hazard based on the researches is required.

• Composites Research
• /
• v.33 no.3
• /
• pp.125-132
• /
• 2020

The polymerization shrinkage behavior of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was measured using digital image correlation method. The stress distribution on the surface of specimen was calculated by finite element analysis with equivalent elastic modulus and was compared with the measured shrinkage distribution. Camera images were monitored by a CCD camera during and after the irradiation of light. As a result of the DIC analysis, a non-uniform shrinkage distribution was observed in both composite resins, and the resin core inside the ring specimen had free flowability, leading to in greater shrinkage strain than the resin/ring interfacial region. It was observed that as the distance from the center of the resin increased, the radial average shrinkage strain decreased. The radial average shrinkage strain during light irradiation occurred to be 33% for P90 and 57% for AP-X of the entire strain at the end of the test. The shrinkage behavior of P90 and AP-X was measured to be significantly different from each other during light irradiation. In the resin near the resin/ring interface, it was confirmed that the tensile strain rapidly formed to increase after light irradiation, causing a tensile stressed, interface weak.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.3
• /
• pp.236-241
• /
• 1994

The crystal structures of $Cd_6-A$ evacuated at $2{\times}10^{-6}$ Torr and 750$^{\circ}$C (a=12.216(l) ${\AA}$), and of the product of its reaction with Rb vapor (a= 12.187(l) ${\AA}$), have been determined by single-crystal x-ray diffraction techniques in the cubic space group Pm$\bar{3}$m at 21(l)$^{\circ}$C. Their structures were refined to the final error indices, $R_1$=0.055 and $R_2$=0.067 with 191 reflections, and $R_1$=0.066 and $R_2$=0.049 with 90 reflections, respectively, for which I>3${\sigma}$(I). In dehydrated $Cd_6-A$, six $Cd^{2+}$ ions are found at two different threefold-axis sites near six-oxygen ring centers. Four $Cd^{2+}$ ions are recessed 0.50 ${\AA}$ into the sodalite cavity from the (111) plane at O(3), and the other two extend 0.28 ${\AA}$ into the large cavity from this plane. Treatment at 250 $^{\circ}$C with 0.1 Torr of Rb vapor reduces all $Cd^{2+}$ ions to give $Rb_{13.5^-}$A. Rb species are found at three crystallographic sites: three $Rb^+$ ions lie at eight-oxygen-ring centers, filling that position, and ca. 10.5 $Rb^+$ ions lie on threefold axes, 8.0 in the large cavity and 2.5 in the sodalite cavity. In this structure, ca. 1.5 Rb species more than the 12 $Rb^+$ ions needed to balance the anionic charge of zeolite framework are found, indicating that sorption of $Rb^0$ has occurred. The occupancies observed can be most simply explained by two "unit cell" compositions, $Rb_{12^-}A{\cdot}Rb$ and $Rb_{12^-}A{\cdot}2Rb$, of approximately equal population. In sodalite cavities, $Rb_{12^-}A{\cdot}Rb$ would have a $(Rb_2)^+$ cluster and $Rb_{12^-}A{\cdot}2Rb$ would have a triangular $(Rb_3)^+$ cluster. Each of the atoms of these clusters must bind further through a six-oxygen ring to a large cavity $Rb^+$ to give $(Rb_4)^{3+}$ (linear) and $(Rb_6)^{4+}$ (trigonal). Other unit-cell compositions and other cationic cluster compositions such as $(Rb_8)^{n+}$ may exist.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.888-895
• /
• 2003

Combustion chamber crevices in SI engines are identified as the largest contributors to the engine-out hydrocarbon emissions. The largest crevice is the piston ring-pack crevice. A numerical simulation method was developed, which would allow to predict and understand the oxidation process of piston crevice hydrocarbons. A computational mesh with a moving grid to represent the piston motion was built and a 4-step oxidation model involving seven species was used. The sixteen coefficients in the rate expressions of 4-step oxidation model are optimized based on the results from a study on the detailed chemical kinetic mechanism of oxidation in the engine combustion chamber. Propane was used as the fuel in order to eliminate oil layer absorption and the liquid fuel effect. Initial conditions of the burned gas temperature and in-cylinder pressure were obtained from the 2-zone cycle simulation model. And the simulation was carried out from the end of combustion to the exhaust valve opening for various engine speeds, loads, equivalence ratios and crevice volumes. The total hydrocarbon (THC) oxidation in the crevice during the expansion stroke was 54.9% at 1500 rpm and 0.4 bar (warmed-up condition). The oxidation rate increased at high loads, high swirl ratios, and near stoichiometric conditions. As the crevice volume increased, the amount of unburned HC left at EVO (Exhaust Valve Opening) increased slightly.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.284-286
• /
• 2002

The inverted retina of the Onchidium dorsal eye (DE) is composed only of ciliary-type photoreceptor cells (CC's). The outer segment (OS) of the CC is a concentric lamellar structure consisting of many modified ciliary membranes and stains positively with anti-$\beta$-tubulin antibody. Near the base of the OS there are about 30 basal bodies each connecting individually to a cilium. The cilia are rod-shaped at the base, progressing upwards to a flattened sheet-like shape with increasing surface area. Three-dimensional analysis on serial sections demonstrates the ladle-shape of a modified cilium. Many modified cilia wrap around each other like the leaves of a cabbage. Nine pairs of microtubules (MT's) are located regularly in a ring at the base of the cilium, gradually losing their regular arrangement towards the periphery, where they separate into two subgroups that are contained within two swollen portions of a modified cilium. Within the CC of the Onchidium DE, MT's in the modified cilium exist as two poles extending longitudinally in a thin expanded ciliary membrane. This arrangement may support the photoreceptive OS and serve to maintain its structural integrity.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.159-165
• /
• 2003

Self-excited noise generation from laminar flames in thin annular jets of methane/air premixture has been investigated experimentally. Various flames were observed in this flow configuration, including conical shape flames, ring shape flames, steady crown shape flames, and oscillating crown shape flames. Self-excited noise with the total sound pressure level of about 70dB was generated from the oscillating crown shape flames for the equivalence ratio larger than 0.95. Sound pressure and $CH^{\ast}$ chemiluminescence were measured by using a microphone and a photomultiplier tube. The frequency of generated noise was measured as functions of equivalence ratio and premixture velocity. A frequency doubling phenomena have also been observed. The measured $CH^{\ast}$ chemiluminescence data were analyzed from which the corresponding sound pressure has been calculated. By comparing the data with those of measured ones, the noise source can be attributed to the flame front fluctuation near the edge of the oscillating crown-shape flames. The flame stability regime was influenced sensitively to the supplying air through the inner tube.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.186-189
• /
• 2010

Reflection(R($\omega$)), transmission(T($\omega$)) and loss(L($\omega$)) characteristics of multi-layer metamaterials are investigated experimentally in free space with the incident EM waves perpendicular to the substrate plane. The sample is made of split-ring resonators(SRRs) and wires which are the typical model of metamaterials. The R($\omega$) and T($\omega$) of multi-layer metamaterials have been calculated from the measured S-parameters. In this paper, we got the impedance-matched result according to the curves of R($\omega$), meanwhile the T($\omega$) decreased with increasing number of layers. At last, we attained the result that the L($\omega$) gets to nearly 98% around 8 GHz, with R($\omega$)=T($\omega$)=0. The design presented in this paper achieves experimented loss near unity.