• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.65-69
• /
• 2005

Curretly, the development of MEMS(Micro Electronic Mechanical System) technology awakes many research's interest for the aerodynamics. This work presents the development of a compact synthetic jet actuator for flow separation control at the flat plate. The formation and evolution of fluidic actuators based on synthetic jet technology are investigated using Reynolds-Averaged Navier-Stokes equations. Also, 2-Dimensional, unsteady, incompressible Navier-Stokes equation solver with single partitioning method for Multi-Block grid to analyze and a modeled boundary condition in developed fo. the synthetic jet actuator. Both laminar and turbulent jets are investigated. Results show very good agreement with experimental measurements. A jet flow develops, even though no net mass flow is introduced. Pair of counter-rotating vortices are observed near the jet exit as are observed in the experiments.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.541-550
• /
• 1997

Computational and experimental investigations on the three-dimensional flowfield through an automotive cooling fan are carried out in this work. Steady, incompressible, three-dimensional, turbulent flow through a rotating axial-flow fan is analyzed with Reynolds averaged Navier-Stokes equations and standard k-.epsilon. turbulence model. The governing equations are discretized with finite-volume approximations in non-orthogonal curvilinear coordinates. Computational static pressures on the casing wall agree well with the experimental data which are measured in this work. And, they are sensitive to the change of tip clearance. The flowfield is not significantly affected by the thickness of the blade. The k-.omega. model gives the static pressure rise on the casing wall which is similar to that with the k-.epsilon. model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.1-9
• /
• 2004

This study concentrates on the upwind schemes for convergence acceleration of the multigrid method for the Navier-Stokes equations. Comparative study of the upwind schemes in the Fourier space has been performed to identify why the second-order upwind scheme with enlarged stencil can be preconditioned better than the classical second-order upwind scheme. The full-coarsening multigrid method with implicit preconditioned multistage scheme has been implemented for verification of analysis. Numerical simulations on the inviscid and turbulent flows with the Spalart-Allmaras turbulent model have been performed. The results showed consistent trend with the analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.88-88
• /
• 2019

컴퓨터 성능향상과 수치해석기법의 발달로 인해 Navier-Stokes 방정식에 기초한 수치모델을 활용한 3차원 유동/파동장 해석이 증가하고 있는 추세이다. 그러나 아직까지 Navier-Stokes 방정식 모델의 계산부하를 PC에서 소화하기에는 무리가 따른다. 게다가 실험실 스케일을 벗어나, 실제 현장을 계산영역으로 설정할 경우에는 계산량이 엄청나게 증가하게 된다. 이것을 극복하기 위해서는 반듯이 병렬계산을 수행하여야 한다. 본 연구에서는 계산부하가 큰 Navier-Stokes 방정식 기반의 3차원 수치모델 LES-WASS-3D를 활용한 대용량 병렬계산체계를 구축한다. 나아가 3차원 정밀 또는 광역의 유동/파동장 해석에 있어서 병렬계산체계의 성능과 적용성을 검토한다. 현재 보급되고 있는 PC들은 모두 멀티프로세서가 장착됨으로 손쉽게 병렬계산을 수행할 수 있다. 그러나 정밀 또는 광역해석을 위해서는 대용량 병렬계산 컴퓨터가 요구된다. 따라서 본 연구에서는 보조프로세서를 장착한 공유메모리 환경의 고성능 병렬계산체계를 구축한다. 나아가 포트란 기반의 순차코드로 구축된 기존 3차원 Navier-Stokes 방정식 모델 LES-WASS- 3D를 병렬코드로 변환한다. 병렬계산 성능 및 적용성을 검토하기 위한 수치해석을 수행한다. 이상의 과정을 통해 본 연구에서 구축한 병렬계산체계의 성능 및 적용성을 확인할 수 있었다. 그리고 3차원 유동/파동장 해석에 있어서 정확도 향상뿐 아니라, 계산영역을 확장할 수 있는 계기가 마련되었다. 또한 유동/파동 해석보다 많은 계산시간이 필요한 지형변동 해석에도 충분히 적용될 수 있다고 판단된다.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.1005-1012
• /
• 2000

Numerical optimization techniques combined with a three-dimensional thin-layer Navier-Stokes solver are presented to find an optimum shape of a stator blade in an axial compressor through calculations of single stage rotor-stator flow. Governing differential equations are discretized using an explicit finite difference method and solved by a multi-stage Runge-Kutta scheme. Baldwin-Lomax model is chosen to describe turbulence. A spatially-varying time-step and an implicit residual smoothing are used to accelerate convergence. A steady mixing approach is used to pass information between stator and rotor blades. For numerical optimization, searching direction is found by the steepest decent and conjugate direction methods, and the golden section method is used to determine optimum moving distance along the searching direction. The object of present optimization is to maximize efficiency. An optimum stacking line is found to design a custom-tailored 3-dimensional blade for maximum efficiency with the other parameters fixed.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.3 s.8
• /
• pp.7-11
• /
• 2000

A numerical study based on the three-dimensional thin-layer Navier-Stokes solver is carried out to analyze the flowfield through a single stage transonic compressor. Explicit fout-step Runge-Kutta scheme with spatially variable time step and implicit residual smoothing is used. The governing equations we discretized with explcit finite difference method. Mired-out average method is used at the interface between rotor and stator. And, an artificial dissipation model is used to assure the stability of solution. The results with k-w turbulence model were compared to the results with Baldwin-Lomax model, and physical phenomena of transonic compressor are presented. The two turbulence models give the results that show reasonably good agreements with experimental data.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.12-20
• /
• 1999

The computations of the flowfield and pollutant dispersion over a flat plate and the Russian hills of various slopes are described. The Gaussian plume and the puff model have been used to calculate concentration of pollutant. The Reynolds-averaged unsteady incompressible Navier-Stokes equation with low Reynolds κ-ε model has been used to calculate the flowfield. The flow data of a flat plate and the Russian hills from Navier-Stokes equation solutions has been used as the input data for the puff model. The computational results of flowfield agree well with experimental results of both a flat plate and Russian hills. The concentration prediction by the Gaussian plume model and the Gaussian puff model also agrees flirty well with experiments.

• Journal of the Korean Mathematical Society
• /
• v.38 no.1
• /
• pp.1-23
• /
• 2001

This paper is concerned with an optimal shape control problem for the stationary Navier-Stokes system. A two-dimensional channel flow of an incompressible, viscous fluid is examined to determine the shape of a bump on a part of the boundary that minimizes the viscous drag. by introducing an artificial compressibility term to relax the incompressibility constraints, we take the penalty method. The existence of optima solutions for the penalized problem will be shown. Next, by employing Lagrange multipliers method and the material derivatives, we derive the shape gradient for the minimization problem of the shape functional which represents the viscous drag.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1624-1629
• /
• 2008

The governing equations in generalized curvilinear coordinates for a 3D pulsatile flow are the Incompressible Navier-Stokes (INS) equations with the artificial dissipative terms and continuity equation discretized using a second-order accurate, finite volume method on the nonstaggered computational grid. This method adopts a dual or pseudo time-stepping Artificial Compressibility (AC) method integrated in pseudo-time. The computational technique implements the implicit approximate factorization method of the Beam and Warming method (1978), which is the extension of the Alternate Direction Implicit (ADI) method. The algorithm yields practically identical velocity profiles and secondary flows that are in excellent overall agreement with an experimental measurement (Rindt & Steenhoven, 1991).

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.293-299
• /
• 2001

Since the previous cut-and-try design algorithm require much cost and time, it has recently been concerned the automatic design technique using the CFD and optimum design algorithm. In this study, the Navier-Stokes equations is solved to consider the more detail viscous flow informations of cascade interaction and O-H multiblock grid system is generated to impose an accurate boundary condition. The cubic-spline interpolation is applied to handle a relative motion of a rotor to the stator. To validate present procedure, the time averaged aerodynamic loads are compared with experiment and good agreement obtained. Once the N-S equations have been solved, the computed aerodynamic loads may be used to computed the sensitivities of the aerodynamic objective function. The Modified Method of feasible Direction(MMFD) is usef to compute the