• 한국정보통신학회논문지
• /
• 제20권2호
• /
• pp.445-450
• /
• 2016

본 논문은 함정의 형상이 탈자 이후에 함정에 형성되는 수직자화에 미치는 영향에 대해 조사하였다. 선박의 전면 전개도로부터 함정의 형상을 삼각형, 사각형, 원형으로 선택하여 지자계에 의한 수직방향의 유도자화를 FEM 정자장 해석으로 조사하였다. 탈자과정 중에 자화에 의한 자계를 측정하였으며, 탈자 이후 성분분리를 통해 영구자화에 의한 자계의 수평 및 수직성분의 크기를 바이어스 자계의 변화에 따라 조사하였다. 이 실험으로부터 함정의 형상을 고려하는 탈자처리 방법이 필요하며 방법으로 선수와 선미 쪽에 권선 간격을 좁게 하여 함정의 중앙부분보다 비교적 더 큰 자계가 인가되도록 하는 것이 바람직하다는 것을 알았다.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.76-83
• /
• 2016

The various model tests are carried out to estimate and verify a ship performance in the design stage. But in view of the cost, the model test should be applied to every project vessel is very inefficient. Therefore, other methods of predicting the maneuverability with confined data are required at the initial design stage. The purpose of this study is to estimate the hydrodynamic derivatives by using the multiple regression analysis and PMM test data. The characteristics of the stern shape which has an important effect on the maneuverability are applied to the regression analysis in this study. The correlation analysis is performed to select the proper hull form coefficients and stern shape factors used as the variables in the regression analysis. The comparative analysis of estimate results and model test results is conducted on two ships to investigate the effectiveness of the maneuvering hydrodynamic derivatives estimation applied the stern shape. Through the present study, it is verified that the estimation using the stern shape factors as the variables are valid when the stern shape factors are located in the center of the database.

• 한국해양공학회지
• /
• 제20권2호
• /
• pp.66-71
• /
• 2006

To develope a hull form of catamaran type dredging vessel, resistance characteristics is investigated to find the interaction effect of waves between the two hulls. Re fore body shape is simplified as two dimensional wedge shape for the maintenance and disassembly/assembly. Based on MAC method, numerical simulation is performed in staggered variable mesh system. Re conservation form of Euler equations and continuity equation are applied as governing equations. To verify numerical methods, the wive patterns along the hull surface are compared with the results of model tests. This study is performed as varying wedge shape of the bow and the distance between the two hulls. The wave interaction between two hulls are observed to investigate the relation the resistance performance and the flow characteristics. Suitable hull form and distance between two hulls are discussed.

• Journal of Multimedia Information System
• /
• 제7권4호
• /
• pp.269-276
• /
• 2020

The small craft including jet-board for leisure are commonly smaller than the general commercial vessels. For the floating vessel, the motion analysis is significantly important component to design the shape. It is, however, hardly predicting its behavior by using conventional boundary element method due to violating small amplitude assumption for potential theory. The computational fluid dynamics method can afford to simulate such small craft, but its grid system was not able to calculate motion, because movable body disturbs the grid system by confliction. The dynamics fluid body interaction model with over-set mesh system can be dealt with movable floating body under irregular ocean wave. In this study, several cases were considered to reveal that DFBI is essential method to predict floating body motion. The single phase simulate was conducted to establish the shape perfection, and then the validated vessel was simulated with ocean waves weather DFBI option on or off. Through the comparison, the results between the cases of DFBI on and off shows significantly difference. It was claimed that the DFBI was necessary not only to calculation body motion, but also to predict accurate drag and lift force on the floating body for small size craft.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.469-475
• /
• 2010

The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.435-444
• /
• 2011

This paper deals with the structural assessment of metallic and non-metallic stiffened/monocoque plated marine structures under a lateral pressure load to identify appropriate combination of material and section configuration, especially at the preliminary marine structural design stage. A generic rectangular plated structure is exemplified from the metallic superstructure of a marine vessel and its structural topology is varied for the structural assessment. In total 13 different structural topologies are proposed and assessed using appropriate elastic solutions in conjunction with a set of stress and deflection limits obtained from practice. The geometry dimensions and weights of the structural topologies are calculated, and subsequently, the costs of the materials used in the structural topologies are reviewed to discuss the cost-effectiveness of the materials. Finally, conclusions are made with the aim of suggesting suitable structural topology for the marine structural member considered in this paper.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.856-867
• /
• 2020

This paper aims to provide the most useful method of determining an optimum LCB position and design direction of fore- and aft-body hull shape for a SLBV. It is known that the SLBV has a lower length-to-beam ratio, larger Cb and simpler stern shape designed for the installation of azimuth thrusters comparing to those of conventional LNG carriers. Due to these specific particulars of SLBV, the optimum LCB position was very different to that of conventional LNG carrier. And various approaches were applied to determine the optimum fore- and aft-body hull shape. The design direction for the optimum hull-form was evaluated as the minimization of the total resistance which includes the wave-making resistance and form-drag with numerical simulation.

• 대한조선학회논문집
• /
• 제52권1호
• /
• pp.19-24
• /
• 2015

The economic efficiency for fishery products can be related to their freshness and the quality. In order to freshly storage the product, freezing equipment system is necessary for fishing vessels. For this purpose, the horizontal plate freezer (HPF) is mostly used. In this research, our major objective is to improve the freezing performance of the HPF. Therefore, it is important to analyse the relationship between the shape of channels and the cooling temperature of the HPF. In order to save calculation time while checking the trend analysis between shape and performance, we used scaled models, and evaluate the cooling temperature of full scale model based on trend analysis results. The produced HPF in domestic was used, and the same operating conditions are considered. Based on this paper, the future research will be a comparison and verification through the experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.316-322
• /
• 2017

본 논문의 주 목적은 수치해석 도구를 활용하여 저항성능 관점에서 우수한 선형을 개발하는 것이다. 최종 개발된 선형의 성능 평가를 위해 수조 모형시험을 수행하였다. 현존선은 도면을 바탕으로 실물과 도면의 타당성 검토를 위해 실태조사를 수행하였다. 실태조사 시에 실제 운항 상태인 주 운항 배수량 및 주 운항 선속을 확인하였다. 수치해석을 바탕으로 현존선의 저항성능을 검토하였다. 개발선은 선수어깨의 파형개선, 배수량 분포의 균형화, 단면형상의 수정 그리고 중앙 스케그의 크기와 형상 변경에 관한 스터디를 통해 도출되었다. 수치해석 결과 개발선은 조파저항 개선에 의해 저항성능 관점에서 주 운항 선속인 11노트에서 약 15% 개선된 양을 보여주었다(Table 4 참조). 개발된 선형의 성능 평가를 위해서 수조 모형시험을 수행하였으며 그 결과 11노트에서 약 17% 개선된 양을 보여주었다(Table 5 참조).

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.183-187
• /
• 2011

As larger the commercial vessel is, and rougher the marine environment becomes nowadays, drag embedment type anchor (DEA) of more stable performance and higher holding power is requested to be applied on the vessel. But, the performance of DEA has not become well known to academy and industries so far, that the basic study of DEA performance and holding force for the development of new DEA of higher performance is insufficient that required. In this paper, three types of same holding category DEA model (HALL, AC-14, POOL-N, scale 1/10), which are generally applied on the commercial vessel nowadays, were tested by being horizontally dragged on the test tank, on which sand was being floored with sufficient depth, and measured the holding force of each anchor simultaneously using load cell and D/A converter. With the test results, the embedding motion was analyzed to have three different stages and the holding force of each anchor was analyzed with respect to the anchor geometry, such as shape and weight of each type of anchors, and final embedding depth.