• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.169-170
• /
• 2015

This study is the experiment for manufacturing the Lightweight non-cement matrix based on the blast furnace slag, paper ash. Materials like cement and blowing agent in foamed concrete is replaced by by-products fro blast furnace slag and paper ash. Further, the experiment was performed by replacing alkali with nature gypsum and α type gypsum by (0, 5, 10, 15, 20) of weight of alkali (wt.%) in order to reduce the amount of expensive alkali-activator. Consequently, in the case of the density, plain showed the lowest density and it seems that specimen adding nature gypsum 5% has the best compressive strength and flexural strength. It is detemined that the strength is lowered in accordance with the α type gypsum replacement ratio is higher. The research that it can supplement the further intensity seems to be needed.

• Herbal Formula Science
• /
• v.15 no.1
• /
• pp.1-19
• /
• 2007

This study was investigated to make sure the range of Gypsum treatment, the nature of disease, the pathology and the dosage of it in Dongeuybogam. The following conclusions were reached through investigations on the prescriptions that use Gypsum as a key ingredient. The Gypsum blended prescriptions are utilized in 23 fields of treatment such as cold, head. ect. Prescriptions that use Gypsum as the main ingredient are used commonly in the treatment of cold, head disease, fever, skin disease, diabetes, stroke, ophthalmic disease, jaundice, ENT disease and dental disease. The Gypsum is used for nature of disease which of cold, heat(fever), summer heat, phlegm, malfunction of liver, malfunction of liver and kidney, heat of stomach, malfunction of spleen and fever of stomach. The clinical dosage of Gypsum has ranged at a wide variety of amount from 1.6g to 16g per dose with 4g ${\sim}$ 8g being the typical dose for most treatment. The Gypsum is applied as a fundamental prescription with several herb remedies for the pathology.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.570-574
• /
• 2010

The main function of conventional insulation materials is only to block the heat transfer and reduce heat loss from the building. On the other hand, thermal storage materials can work as an energy saver by absorbing or emitting heat within a specific temperature range. Thermal storage materials for building can maintain a constant temperature by effectively regulating the cycle of indoor temperature. As a result, we can enhance the performance of a cooling and heating system efficiently. In this study, phase change materials (PCMs) were added as thermal storage materials into gypsum boards which are extensively used for building material and we found out the thermal environmental characteristics. In addition, we checked out some problems when applying the thermal storage materials to buildings. Finally, This study set out to examine the degree of environmental-friendly characteristics of thermal storage building materials by analyzing the amount of TVOC and HCHO contents with the possibility of pollutants emission.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.102-103
• /
• 2014

Due to the nature of the existing load, the criteria of assessing the intensity of the lightweight wall's impact resistance has been though of as obscure. The current study, therefore, focuses on the standardized assessment of the impact resistance to the force of the large soft body applying to the lightweight wall. The gypsum board wall showed a low level of the maximum residual displacement. It is, however, required to be careful about the selection of the finishing process since the high level of the maximum displacement is likely to cause harm to finishing materials. Unlike the gypsum board, the ALC block wall displayed a considerable rigidity while showing almost no maximum residual displacement. Even with the low level of the maximum displacement due to the stiffness, the ALC block wall is still likely to be affected by the vibration derived from any impact on the surface, which demands a need for additional study. The future experimental study, accordingly, will focus on the impact of the vibration on finishing materials, consequently leading to the accurate prediction of the possibility of potential damage to the lightweight wall caused by the large soft body.

• Journal of the Korean Chemical Society
• /
• v.46 no.1
• /
• pp.7-13
• /
• 2002

Although it has been known that the magnetized water shows different physicochemical properties, the exact nature of the magnetized water is not clearly elucidated yet. We have explored the effect of magnetized water in the precipitation of salts, i.e., $BaSO_4,\;BaCO_3,\;CaCO_3$, and in the hydration hardening of gypsum plaster. The amount of salt precipitation was measured by salt filter assay in water bath, $25^{\circ}C$ and also the hydration hardening speed of gypsum plaster was measured by the Gillmore needle method at room temperature. When the salt ions were interacted with each other in 0.1 M concentration, the precipitation reactions of $BaSO_4,\;BaCO_3$, and $CaCO_3$ increased more in the magnetized water, about 3.6%, 3.8%, and 4.4%, respectively, than in the control water. And the hydration hardening speed of gypsum plaster increased more in the magnetized water than in the control water. These data suggest that the magnetized water, which is supposed to be organized by forming numerous nano/micro clusters, induces the increase of salt precipitation and also accelerates the hydration hardening speed of gypsum plaster.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.66-73
• /
• 2003

To investigate the availability of solidified wastes as resource, wastewater sludge, waste gypsum and fly ash were mixed and the results with various mixing ratios are as follows. Compressive strength turned out to be increasing as the amount of waste gypsum increases, keeps longer curing inhibition, and higher forming Pressure under the conditions of waste gypsum/sludge ratio 0.31-0.45, and 0.9kg cement as 15% and 1.2kg cement as 20% of total amount. Solidified agent under the fly ash/sludge ratio 0.45, 0.6, compressive strength seemed to be higher than standard one which means solidified wastes with these conditions could be applicable in real life. These results inform that concentrations of the leachate $Cr^{+6}$, Cu, Zn, Cd, Pb solidified matrix, containing low concentration of heavy metal, were cured with/without enough time it still will cause adverse effect on nature environment and application of heavy metal sequester must be needed to reuse industrial wastes from incineration plant solidified matrix. Total cost price, when considering manufacturing capability of the facilities for resourcerizing as 18,000ton was presented 678,664,000 won, as it were, manufacturing cost price was 37,704 won per ton. The results as above has shown that it's possible to use the mixture of waste gypsum/sludge, fly ash/sludge, cement, additions, and solidification matter as substitute of materials like brick, block, interlocking which has proper compressive strength of KS L 5201 and KS F 4004.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.215-232
• /
• 2000

The Valence(Z) of positively and negatively charged alumina particles in the dilute suspensions was analyzed with the electrical conductivity of the suspensions. The mobility of negative particles was lower than that of positive particles at a similar Z value because of the stronger effect of chemical bonding over the hydrated particle surfaces. The apparent viscosity of acidic suspensions of 1-40 vol % solid was lower than that of basic suspensions. This result was discussed based on the three important effects of the valence, concentration and nature of hydrated surface of alumina particles. The density of alumina compacts consolidated by filtration through gypsum molds became lower for the basic suspensions than for the acidic suspensions. This result was correlated to the properties of the colloidal alumina suspensions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1876-1884
• /
• 1999

The next generation of wireless LAN AND PBX systems will make use of the unlicensecd band at 2.5 GHz. Deployment of these systems inside buildings requires and understanding of propagation characteristics within buildings. Because the wavelength is small compared to building dimensions, ray methods can be used to predict propagation, but they require knowledge of the transmission and reflection properties of walls. This paper reports on transmission measurements made at walls made of gypsum board on metal studs, and at concrete block walls using directive antennas. The measurements are found to give good agreement with theoretical results that account for the periodic nature of the wall structure.

• Journal of Haehwa Medicine
• /
• v.8 no.2
• /
• pp.171-189
• /
• 2000

By Literatural studying on migraine, The results were obtained as fallow : 1. A different name on migraine were called hemicrania(頭偏痛, 邊頭痛, 偏頭風). 2. In the cause of a disease in migraine, the cases were clasified into the fallowing kind : internal cause were a decline in energy and blood(氣血具虛), external cause were outside evil(外邪) in wind cold heat wetness(風寒暑濕), non internal, external cause were exhaustion. The right side migraine were concerned phlegm heat, the right side migraine were concerned wind decline in blood. 3. Migraine is appeared on the side, For the reason, liver function in excess of normal limits(肝陽上亢), a sudden of liver fire(肝火) is becomeed of invasion upon soyangkuong(少陽經) in internal external cause 4. Usage method of medicines is appeared that order underclothes theraphy(內服法), to pump out in nose theraphy, to join head theraphy(頭點法), heating smoke theraphy(熏煙法) 5. CNIDII RHIZOMA(川芎) is in mostly general use for migraine, in that order LEDEBOURIELLAE RADIX(防風) ANGELICAE DAHURICAE RADIX(白芷) ASARI HERBA CUM RADICE(細辛) NOTOPTERYGII RHIZOMA(羌活) GLYCYRRHIZAE RADIX(甘草) CHRYSANTHEMI FLOS(菊花) BUPLEURI RADIX(柴胡) SCUTELLARIAE RADIX(黃芩) ANGELICAE GIGANTIS RADIX(當歸) GYPSUM FIBROSUM(石膏) MENTHAE HERBA(薄荷) GLYCYRRHIZAE RADIX(炙甘草) VITICIS FRUCTUS(蔓荊子), nature is in mostly general hot warm(辛溫), bitter cold(苦寒), guikuong(歸經) is in mostly general liver gall kuong(肝膽經), efficacy is in mostly general to remove wind pain (祛風止痛) and to down fire(瀉火).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.2
• /
• pp.23-32
• /
• 2001

Rock masses are usually discontinuous in nature, as a result of various geological processes they have underdone and they contain rock joints and bridges. Crack propagation and coalescence processes mainly cause rock failures in tunnels. In this study, we focused on the crack initiation, propagation and coalescence process of rock materials containing two pre-existing open cracks arranged in different geometries. During uniaxial compression, wing crack initiation stress, wing crack propagation angle, and crack coalescence stress of Diastone gypsum and Yeosan Marble specimens were examined. And crack initiation, propagation, and coalescence processes were observed. Shear, tensile and mixed (shear+tensile) types of crack coalescence occurred. To compare the experimental results with Ashby & Hallam model, crack coalescence stress was normalized and it generally agreed with the experimental results.