• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.10-18
• /
• 2011

This study presents a state of the art in evaluation on naturally occurring asbestos (NOA) areas and effective strategies for investigation and management of NOA areas in Korea. First of all, we defined and classified the NOA area as compiling various countries' regulations, then discussed the best methods for evaluation and management of NOA for reducing exposure of asbestos in the vicinity of NOA areas. According to the literature survey, a three-steps management strategy was suggested in this study. The first step is a confirmation stage of asbestos contamination possibility and the second step is an assessment stage of asbestos contamination using investigation, analysis, evaluation and reclamation. The final step is a following-up control stage. These three management steps for NOA area will give the maximum effectiveness of NOA control in Korea.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.330-336
• /
• 2018

The objective of this study was to determine whether crops and fruits absorb the naturally occurring asbestos (NOA). The concentration of asbestos in various crops and fruits grown in NOA areas was analyzed and background levels of asbestos in ambient air and soil samples were assessed. Actinolite/Tremolite asbestos were detected in all soil samples. Among 21 ambient air samples, 2 samples were recorded to contain 0.0005 f/cc (fiber per cubic centimeter) but no asbestos was detected in the other samples using transmission electron microscopy (TEM). However, no evidence suggesting that the crops and fruits could be contaminated by NOA was found in this study. The excess lifetime cancer risks (ELCRs) of ABS scenarios (agricultural activities) used in this study were calculated by using the Arithmetic (AM) and Geometric mean (GM) of ELCRs. The AM and GM of ELCRs estimated from digging soil and weeding activities did not exceed $1{\times}10^{-4}$, which was defined as the general acceptable risk range for exposure. The results of this study would be informative to NOA managers and related policy makers to make plans to prevent unexpected exposure to asbestos to residents living in an NOA area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.159.2-159.2
• /
• 2010

Asbestos is the collective name for a group of naturally occurring minerals in their fibrous form and hydrous silicates of magnesium and a mineral fiber that has been used commonly in a variety of building construction materials for insulation and as a fire-retardant. Asbestos has been used for a wide range of manufactured goods, because of its fiber strength and heat resistant properties. Nevertheless harmful of asbestos is quite serious. Exposure to airborne friable asbestos may result in a potential health risk because persons breathing the air may breathe in asbestos fibers. Continued exposure can increase the amount of fibers that remain in the lung. Fibers embedded in lung tissue over time may cause serious lung diseases including asbestosis, lung cancer. In this paper, we carried out as fundamental study for dispose of asbestos cement slate safely and perfectly. Melting Temperature of asbestos need to more than $1,520^{\circ}C$ and specially asbestos cement slate need more energy than that of pure asbestos. We need to decrease melting temperature of asbestos cement slate for economical efficiency. To the purpose, glass and bottom ash were chosen as additives for basicity control. we analyzed about properties of asbestos cements slate, melting characteristics on the additives ratio and temperature. We confirmed about harmlessness of melting slag through analysis of scanning electron microscope(SEM) and x-ray diffractometer(XRD).

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.137-143
• /
• 2014

Asbestos is given to a variety of six naturally occurring silicate minerals. These minerals possess high tensile strength, flexibility, resistance to chemical and thermal degradation, and electrical resistance. These minerals have been used for decades in thousands of commercial products, such as insulation and fireproofing materials, automotive brakes, textile products, cement and wallboard materials. When handled, asbestos can separate into microscopic-size particles that remain in the air and are easily inhaled. It is now known that prolonged inhalation of asbestos fibers can cause serious and fatal illnesses including malignant lung cancer, mesothelioma, and asbestosis. Therefore the use of asbestos and asbestos products has dramatically decreased in recent years. Also all constructions including asbestos should be removed under strictly controlled conditions and very tightly implemented health & safety management systems. In this study, the process of the removal work of the asbestos cement slate was analyzed by IDEF-0 modeling and evaluated by 4M risk assessment method. The results show that removal work of the asbestos cement slate was classified five process and eighteen detail process. The risk of safety side the higher than the risk of health side in 4M risk assessment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.3
• /
• pp.253-266
• /
• 2016

Objectives: This study is for characteristics of asbestos occurrence (NOA, naturally occurring asbestos) from the Gapyeong area and its host rocks, serpentinites. Methods: Representative samples are collected from the serpentinite bodies, following degrees of hydrothermal alteration and metamorphism, after about 2 year field trips. Mineralogical, morphological and optical characteristics of the asbestos and host rocks are confirmed by PLM, XRD EPMA and SEM results. Results: The serpentinites are dunites and harzburgites, and host asbestos, including chrysotile, tremolite and actinolite. The asbestos chrysotiles are found as veins ranging from several millimeters to several centimeters in thickness, while asbestos-tremolite and -actinolite occur along cracks and fractures ranging up to ten centimeters in thickness. The chryostiles occur mainly as cross and slip fibers, while the amphibole asbestos is found as vein, slip and oblique fibers. More tremolitic grains are colorless and commonly show elongated or fiber shapes, whereas the magnesio hornblende grains mainly show light green and occur as subhedral to euhedral diamond grains. Conclusions: Overall characteristics of serpentinites from the Gapyeong area are similar to worldwide orogenic-related Alpine type ultramafic rocks serpentinized and serpentinites in South Chungcheong-do Province, Korea, and occurrences of asbestos are similar to those of the ultramafic bodies in South Chungcheong-do Province.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.309-322
• /
• 2018

Naturally occurring asbestos (NOA) occurs in rocks and soils as a result of natural weathering and human activities. It is proved that inhalation of asbestos fibers can lead to increase risk of developing several diseases such as lung cancer and malignant mesothelioma. The parent rocks of asbestos have been mainly associated with (ultra)mafic and carbonate rock. The previous studies on NOA were mainly limited to (ultra)mafic rock-hosted asbestos, but studies on carbonate rock-hosted asbestos are relatively rare in S. Korea. Therefore, this study was aimed to examine mineralogical characteristics of carbonate rock-hosted NOA at three sites including Muju and Jangsu, Jeonbuk province and Asan, Chungnam province. Types of rocks at the three sites mainly consisted of Precambrian metasedimentary rocks, carbonate rock, and Cretaceous and Jurassic granites. Asbestos-containing carbonate rock samples were obtained for mineralogical characterization. XRD, PLM, EPMA, SEM and EDS analyses were used to characterize mineralogical characteristics of the carbonate rock-hosted NOA. From the carbonate rock, fibrous minerals were occurred acicular and columnar forms in the three sites. Fibrous minerals were composed of mainly tremolite and associated minerals included possibly asbestos containing materials (ACM) such as talc, vermiculite, and sepiolite. The length and aspect ratios of tremolite were similar to the standard asbestiform (length >$5{\mu}m$, length:width = 3:1). These results indicate that both non-asbestiform and asbestiform tremolite with acicular forms occurred in carbonate rocks at three sites. Geological and geochemical characteristics and mineral assemblages indicate tremolite and associated minerals might be formed by hydrothermal alternation and/or hydrothermal veins of carbonate rocks due to intrusion of acidic igneous rocks.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.467-477
• /
• 2014

Naturally occurring asbestos (NOA) occurs in rocks and soils as a result of natural weathering and human activities. The asbestos have been associated with ultramafic and mafic rocks, and carbonate rock. The previous studies on NOA were mainly limited to ultramafic and mafic rock-hosted asbestos in Korea. But, studies on carbonatehosted asbestos are relatively rare. Therefore, the purposes of this study were to investigate mineralogical characteristics of carbonate-hosted and metapelite-hosted NOA and to examine genesis of NOA occurred in the both rocks. The study area was Daerori, Seosan, Chungnam Province, Korea. The major rock formation consisted of limestone and schist which have been known to contain asbestos. Sampling was performed at outcrop which contained carbonate rock showing acicular asbestos crystals as well as pegmatitic intrusion that contacted with carbonate rock. PLM, XRD, EPMA, and EDS analyses were used to characterize mineral assemblages, mineralogical characteristics, and crystal habits of amphiboles and other minerals. BSEM images were also used to examine the genesis of asbestos minerals. The amphibole group was observed in all of the carbonate rocks, and actinolite and tremolite were identified in all rocks. These mineral habits were mainly micro-acicular crystals or secondary asbestiform minerals on the surface of non-asbestiform minerals appearing split end of columnar crystals produced by weathering. BSEM images showed residual textures of samples. The residual textures of carbonate rocks showed dolomite-tremolite-diopside mineral assemblages that formed during prograde metasomatism stage. Some carbonate rock also showed diopside-tremolite-talc mineral assemblages which were formed during retrograde metasomatism stage, as the residual textures. In result the presence of asbestos actinolite-tremolite in the carbonate rocks were confirmed in the areas where actinolite-tremolite asbestos was influenced by low temperature hydrothermal solution during metasomatism stage. These asbestos minerals showed the acicular asbestiform minerals, but even non-asbestiform minerals, a bundle or columnar shape, could transform to asbestiform minerals as potential NOA by weathering because the end of columnar shape of non-asbestiform minerals appeared as multiple acicular shaped fibers.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.2
• /
• pp.95-104
• /
• 2012

Electron microscopy of the tremolite-actinolite series amphiboles from the naturally occurring asbestos locality showed the morphological diversity including fibrous, acicular, and prismatic. Very thin, long, and flexible fibers of constant width form ropy bundles or mats. Acicular particles are slightly thick, long, elastic, and easily separated from the bundle of parallel rods. Acicular fragments of lower aspect ratio are formed during the crushing of the amphibole prism. Morphological features of the amphiboles are different depending on their localities and vary in a specimen. Morphological continuum between amphibole fiber and prism requires the establishment of reliable identification criterions and sample preparation protocol based on the relation between carcinogenicity and morphological features.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.451-462
• /
• 2011

Asbestos or its applications have been used for long times and for various purposes in our life because of their merits, namely fire resistance, electric insulation and chemical resistance capacity etc. Despite of theses many merits, one of the problems of asbestos is shown toxicity according to its fiber type. So we need data to solve about this problem. In this paper, we study on the technical method of asbestos waste treatment and on the trends of asbestos researches and developments by the analysis of its patents and DWPI database materials. As a result, the asbestos-waste treatment data in the its related patents is used 267 cases to analyze. These data are divided into 86(32.5%) cases of solid waste disposal(B09B). 41(16.6%) cases of separation(B01D) and 27(10.2%) of lime, magnesia, slag, cement and their composites(C04B).